Bank Alone Taunt Master

A visual threat-management utility providing one-click taunts and assists for party and raid members.
TM 000.jpg

TM 000.jpg

TM 001.png

TM 001.png

TM 002.png

TM 002.png

TM 003.png

TM 003.png

TM 004.png

TM 004.png

TM 005.png

TM 005.png

item image
item image
item image
item image

Description

                                  -漫~*'¨¯¨'*·舞~B̳̿͟͞a̳̿͟͞n̳̿͟͞k̳̿͟͞ ̳̿͟͞A̳̿͟͞l̳̿͟͞o̳̿͟͞n̳̿͟͞e̳̿͟͞~舞*'¨¯¨'*·~漫-

 

Bank Alone Taunt Master

Overview

Welcome to Bank Alone Taunt Master, an essential threat-management utility built specifically for tanks in World of Warcraft: Mists of Pandaria Classic.

In chaotic dungeon runs and massive raid encounters, a few seconds of hesitation is the difference between a clean pull and a wipe. This addon puts a small, always-current panel of your party or raid — pets included — right on your screen, coloring each name by exactly how dangerous their situation is right now, so you can react the instant something goes wrong with a single click, instead of fumbling through target-of-target frames or hunting for the right enemy in a messy pack.

Built specifically for the five tanking classes — Warrior, Paladin, Death Knight, Druid, and Monk — Bank Alone Taunt Master automatically detects your class's taunt on login and wires it straight to the panel, so it's working the moment you log in.

Core Features

Live Threat Tracking Every party or raid member — and their active pet — gets a row in a lightweight panel showing a live threat percentage against whatever they're currently fighting, refreshed five times a second.

Color-Coded, Danger-Sorted Alerts

  • Yellow: a player is climbing dangerously close to pulling aggro, even before the mob has actually switched.
  • Red: a player has aggro right now and is being attacked.
  • A white flash: the instant a name flips to red, it flashes bright white for a split second first, timed to land right as that row also jumps to the top of the list.
  • Rows automatically sort by danger instead of sitting in fixed group order — whoever's actually being attacked lands on row 1, then whoever's climbing toward it, with everyone safe ranked below and anyone offline at the very bottom.

One-Click Taunting Click a highlighted name (or their pet) and your own taunt fires on whatever is attacking them — no target-swapping, no macros to remember.

Know Before You Click

  • A line under the panel title always tells you "Taunt Ready" or a live countdown, so you know at a glance whether clicking will do anything.
  • A name warns you in orange when its target is out of taunt range — the second most common reason a click silently does nothing — checked against the real enemy, and only shown when the game confirms you're actually too far away.

Aggro-Steal Alerts If anyone else in your group taunts and pulls aggro off you, a raid-warning-style banner and sound fire together, naming them and the spell they used, with a matching chat line for the record. Covers hunter pets and warlock Voidwalkers too.

Auto-Announce Clicking a row can automatically post a chat line letting the group know you've got it, so nobody has to ask.

A Real Options Panel Right-click the minimap button, or type /bat options, for a checkbox-based panel covering every toggle above, instead of needing to remember slash commands.

Quality of Life A draggable minimap button shows or hides the panel with a left-click; the panel itself can be moved and locked in place, appears automatically when you group up, and disappears when you're solo. A three-layer targeting fallback finds a sensible enemy to taunt even when nameplates or targets aren't perfectly lined up. One addon folder, no dependencies.

Why Use Bank Alone Taunt Master?

No more squinting at threat meters or guessing whether you're already covered. By turning raw threat data into a single, color-coded panel with one-click reactions, Bank Alone Taunt Master cuts the time between "something's wrong" and "it's handled," so your group can push content with confidence.

Installation

  1. Download the latest version of the addon.
  2. Extract the BankAloneTauntMaster folder from the downloaded .zip file.
  3. Move the extracted folder into your WoW directory: World of Warcraft\_classic_\Interface\AddOns\
  4. Launch World of Warcraft, click the AddOns button on the character select screen, and make sure Bank Alone Taunt Master is checked before entering the game. If it shows greyed out as "out of date," tick "Load out of date AddOns" on that same screen — normal and safe on Classic progression realms.

Slash Commands

Command Effect
/bat unlock Unlock the panel so you can drag it by the title bar
/bat lock Lock the panel in its current spot
/bat reset Reset the panel to the center of the screen
/bat show Force the panel to show
/bat hide Hide the panel
/bat options Open a checkbox-based options panel for every toggle below (same as right-clicking the minimap button)
/bat alerts Toggle the aggro-steal warning on/off (on by default)
/bat sound Toggle the sound that plays with the aggro-steal warning (on by default)
/bat warnsound Toggle the chime that plays when a name enters the early-warning color (on by default)
/bat announce Toggle auto-announcing your taunts to party/raid chat (on by default)
/bat testalert Fire a one-off test aggro-steal warning to confirm it's working
/bat debug Print diagnostic info about aggro detection to chat

/tauntmaster also works as a full-length alias for /bat.

Compatibility

  • Game version: World of Warcraft: Mists of Pandaria Classic
  • Dependencies: None
  • Standalone addon — not part of, and does not require, Bank Alone Guides.

Changelog

v1.16.0

  • New: a real options panel — right-click the minimap button, or type /bat options, for checkboxes covering every on/off setting instead of needing to remember slash commands. A small standalone window rather than a page inside the game's own Interface Options, since that system doesn't reliably carry over to a Classic-tier client. Escape closes it, and it stays in sync with slash-command changes too.

v1.15.0

  • New: a name warns you in orange when its resolved target is out of taunt range — the second most common reason (after being on cooldown) a click silently does nothing. Shown right where the threat percentage normally sits, since range matters more than the exact number the moment you can't act on it. Checked against the actual enemy, never the ally being protected, and only fires on a confirmed out-of-range result so it never cries wolf.

v1.14.0

  • New: a name flashes bright white for a split second the instant it actually flips to red (aggro), before settling into the normal red — timed to land right as that row also jumps to the top of the sorted list. Fires once on the flip, never while sustained, and fires again for a later, separate aggro event.

v1.13.0

  • New: rows now sort by danger instead of sitting in fixed group order — whoever's actually being attacked lands on row 1, then whoever's climbing toward it, then everyone else safe (ranked by their own threat percentage), with anyone offline sinking to the very bottom. Updates live the instant a situation changes, and never shuffles names around when nothing actually has.

v1.12.0

  • New: a taunt cooldown indicator under the panel title, showing "Taunt Ready" or a live countdown like "Taunt: 4s" for your own taunt spell. Correctly ignores the brief global cooldown from other abilities, so it only reflects your taunt's own real cooldown. Always on, no toggle needed.

v1.11.0

  • New: the early-warning color now has its own soft chime, distinct from the aggro-steal alert sound. Fires exactly once at the moment someone's threat crosses into the warning zone, never repeatedly while they stay elevated. Toggle with /bat warnsound. Works for pet rows automatically.

v1.10.0

  • New: names now turn yellow as an early warning once their threat climbs to 80% or higher against whatever you're fighting, even before the mob actually switches onto them. Still goes full red at the actual aggro flip, same as before. Applies to pet rows automatically, since they share the same detection pipeline as player rows.

v1.9.0

  • New: the aggro-steal warning now plays a sound (Blizzard's own built-in raid-warning chime) alongside the banner and chat line, so you catch it even when you're not looking at the screen. On by default, toggle with /bat sound. Never blocks the banner/chat alert if it fails on some setup.

v1.8.0

  • New: clicking a row can now auto-announce "Taunting <mob> off <name>" to party/raid chat, on by default, so the group knows you're already handling it. Only fires on a genuine click with a real target, never double-posts for one click, toggle with /bat announce.

v1.7.0

  • New: every group member's pet now gets its own row in the panel, labeled "<Owner>'s pet", with the same red/grey aggro coloring, live threat percentage, and click-to-taunt behavior as a player row. If a mob is attacking a hunter's pet, taunt it off with one click, just like you would for a person.
  • /bat debug now lists every trackable row, players and pets together.

v1.6.2

  • Corrected a wrong claim from v1.5.0: Dark Command is NOT Blood-spec-only — it's baseline for all three Death Knight specs. In its place, the addon now checks your actual spellbook on login and warns you directly if the taunt spell it expects you to have isn't there yet, rather than guessing at a reason.
  • /bat debug now also shows the spell's real in-game range and cast time, straight from the game.

v1.6.1

  • Fixed the aggro-steal warning not firing for pets: hunter pets and warlock Voidwalkers were never tracked, so their taunts (Growl, Suffering) went undetected even though player-class taunts worked.
  • Made the alert unable to fail silently — the chat line now always fires first, and any problem with the on-screen banner prints an error instead of just doing nothing.
  • Added /bat testalert to fire a one-off test warning on demand.
  • /bat debug now shows tracked group/pet count and the last taunt-shaped cast it actually saw.

v1.6.0

  • New: if anyone else in your group taunts and pulls aggro off you, a big on-screen warning (raid-warning style) now shows their name and which spell they used, plus a matching chat line. Toggle with /bat alerts.

v1.5.0

  • Added a chat message on login showing which taunt spell was detected for your class, and a warning if none was found.
  • Added a note for Death Knights about a possible spec restriction on Dark Command (corrected in v1.6.2 — it turned out to be wrong; Dark Command works for all DK specs).
  • /bat debug now also shows your detected class and mapped taunt spell.
  • Removed a fallback that could silently try to cast the Paladin's spell for an unrecognized class.

v1.4.0

  • Added a live threat percentage next to each name, alongside the existing red/grey aggro coloring. 100% is the point a mob switches onto that person.

v1.3.0

  • Fixed names not turning red on aggro in some situations. Added a second, independent detection method that checks each group member's current target directly, so detection no longer depends on nameplates alone.
  • Added /bat debug for diagnosing any remaining detection issues.

v1.2.0

  • Fixed taunts not firing when clicking a name.
  • Switched to a more reliable click-cast method with a three-step fallback for finding the right enemy to taunt.
  • Fixed the minimap icon showing blank; now displays a "TM" mark.

v1.1.0

  • Added a draggable minimap button that shows/hides the panel.

v1.0.0

  • Initial release.

Made by a tank, for tanks. Part of the Bank Alone add-on family. Author: Scott's Computer Services (SCS)

Bank Alone Taunt Master Team

profile avatar
  • 6
    Projects
  • 779
    Downloads

World of Wacraft Mists of Pandaria Classic Player {Galakras -Horde} [DFSP (Player Name)]

Donate

More from Bscott8588View all