pipster-1.4.1+mc26.3-neoforge.jar
Curse Maven Snippet
What's new
Pipster 1.4.1 - Smarter Pipes, Better Control
Worlds from 1.3.0 load without any conversion: the save format only gains new optional keys, and ports
without them behave as in 1.3.0. Two things change in existing worlds: see
"Crafters are never emptied" and "Gaseous fluids of other mods" below.
Mods built against the Pipster API keep working: the API is unchanged (pipster-api-1). Client and
server must use the same Pipster version, as before.
Supported Minecraft versions
1.4.1 is made for Minecraft 1.21.1, 1.21.11, 26.1.2, 26.2 and 26.3, each for Fabric and
NeoForge, as in 1.3.0. There are ten files, one per Minecraft version and loader, for example
pipster-1.4.1+mc1.21.1-fabric.jar or pipster-1.4.1+mc26.1.2-neoforge.jar. No file covers
several Minecraft versions.
Minecraft 26.3 now needs Fabric API 0.165.2+26.3 or newer, or NeoForge 26.3.0.100 or newer. WTHIT and the library GuideMe (needed by Powah!) need these builds. The other versions need the same loader builds as in 1.3.0.
If you play on another Minecraft version, Pipster 1.2.0 stays available for 1.21.1 to 26.3 and keeps working. Builds for further versions only come back if enough players ask for them; please say so in the issue tracker.
New
The first four points are based on feedback from Bakumon Modpack team.
Quicker wrench controls
| Action with the Conduit Wrench | Effect |
|---|---|
| Right-click a port | next mode: insert, extract, both, off (an accept port: accept, off) |
| Sneak + right-click a port | open the port screen |
| Left-click an arm | disconnect it; left-click the same side of the centre again to reconnect |
| Sneak + left-click a port | paste the active copy profile (see below) |
| Sneak + right-click an arm without a port | disconnect or reconnect it, as before |
| Sneak + right-click the centre | dismantle the pipe, as before |
| Sneak + right-click into the air | select the next copy profile, as before |
- The action bar says what happened, for example "West: Extract".
- The wrench no longer breaks pipes by left-click. A held left-click in creative mode acts only once.
- Servers that prefer the old controls set
wrenchClassicControls=trueinconfig/pipster-server.properties. Then right-click opens the port screen and sneak + right-click on an arm disconnects it, as in 1.3.0; left-click does nothing.
Separate filters for insert and extract
A port in mode Both can have one filter for what goes into the block and another for what comes out. The button under the card slots switches between "Filter: both" (one filter for both directions, as before), "Filter: in" and "Filter: out". Sneak + click returns to one filter; the out list is then discarded. The installed filter card unlocks both lists with the same number of rules. In the other modes the port has one filter, as before.
Choose the face of the target block
Some blocks take items only on certain faces: a brewing stand takes ingredients only from the top. The new button under the card slots ("Face: auto", "Face: top", "Face: bottom", "Face: north" ...) picks which face of the target block the port uses. Click: next face, sneak + click: previous face. The tooltip names the block. It is still the same block next to the pipe, with the same reach and the same claim check. Jade and WTHIT show a face that is not the facing side.
Pasting a profile also installs the cards
A copy profile now remembers which filter card and whether a rule card the copied port had. Pasting it (Paste button or sneak + left-click) moves matching cards from your inventory into the port. A card that is replaced goes back to your inventory; if the inventory is full, it is dropped. Cards are never created, also not in creative mode. If a card is missing, the settings are pasted anyway and the action bar names the missing card. Profiles copied with 1.3.0 still paste their settings, without cards.
Card tooltips
The tooltip of the Precision Filter Card now says what it adds: keep an amount in the source, fill the target up to an amount.
New integrations (all optional)
None of these mods is required. Without them, nothing changes.
- JEI and REI: drag an item (item pipes) or a fluid (fluid and gas pipes) from the recipe viewer onto a
filter field of the port screen to set it as the filter pattern.
- Only the id is sent. The server checks the open port, your rights and that the id fits the pipe: items on item pipes, normal fluids on fluid pipes, gaseous fluids on gas pipes. No item is ever created.
- Only fields that the installed filter card unlocks accept a drop.
- Item components (enchantments, names) are not taken over by a drag; click with the item in your hand for that, as before.
- WTHIT: looking at a pipe, tesseract or pulse amplifier shows the same information as with Jade. Channel names are shown only to players who have access to the channel.
- Flan: pipes and tesseracts do not reach across a claim border unless both sides allow it with Flan's "piston border" flag. This is the rule Flan applies to pistons. It also works while the owner is offline.
Changed
- Crafters are never emptied. A port at a crafter no longer takes items out of its crafting grid, in any mode
(issue #2). The crafter has no output slot: when it crafts,
it pushes the result out of its front. A port in Extract or Both at the crafter's front takes that result
into the network; Insert and Both still fill the crafter.
- Pipes now fill a crafter evenly, one item per slot, like a hopper. Until now a pipe put all items into the
first free slot, so a crafter fed by a pipe could not craft. (Block tag
#pipster:insert_one_by_one: items go into these blocks one at a time.) - The port screen says "Never emptied: takes only what the block pushes out" when a port at such a block is set to take items out.
- For a crafter that is filled and emptied by the same pipe, use one port in Both at its front with separate filters (see above): "Filter: in" = the ingredients, "Filter: out" = the result. Automated tests on all ten files fill a crafter this way, let it craft and check that the result arrives and nothing is lost.
- Existing worlds: an Extract or Both port at a crafter stops taking ingredients out of the grid after the
update. The rule is the block tag
#pipster:no_extract; a datapack can add other blocks to it or replace it with an empty list to get the 1.3.0 behaviour back. - Tesseract sides follow the same rule, and now also
#pipster:energy_no_insert, which until now only applied to pipe ports.
- Pipes now fill a crafter evenly, one item per slot, like a hopper. Until now a pipe put all items into the
first free slot, so a crafter fed by a pipe could not craft. (Block tag
- Gaseous fluids of other mods travel in gas pipes. The fluid tag
#pipster:gaseousnow lists fluids that other mods model as gases: oxygen and hydrogen (Ad Astra), the gases and steams of Modern Industrialization, and the gases and helium plasma of Tech Reborn. The entries are optional, so the tag loads without these mods.- Existing worlds: such a fluid in the buffer of a fluid pipe becomes a locked entry after the update. It is kept, never lost, but no longer delivered by the fluid pipe. To keep the 1.3.0 behaviour, a datapack can replace the tag with an empty list.
- Moving Pipster blocks with Carry On, Create contraptions or the Mekanism cardboard box: automated tests now move a pipe (with buffer and filter card) and a tesseract (with channel binding) the way these mods do. Buffers, cards and bindings move with the block, nothing is dropped or duplicated, and the network keeps working afterwards. Nothing had to change in Pipster for this.
- CC: Tweaked:
getPortandgetPortsalso reportface(when the port uses another face than the facing side) andseparateFilters(when a port in mode Both has separate filters).
Performance
1.4.1 adds port settings and integrations; the transport code only gained the face choice, the separate out filter and the crafter rule. To check that, 1.3.0 and the development build of 1.4.1 without the crafter rule ran in alternating order on 2026-11-14 on an Intel Core i7-13700H, scene "50,000 pipes, 500 active ports" (8 rounds each on 1.21.1, 4 rounds each on 26.3; each run 1 minute warm-up and 5 minutes of measurement). Medians of Pipster's own time per tick:
| Minecraft / loader | Mean, 1.3.0 → 1.4.1 | p95, 1.3.0 → 1.4.1 |
|---|---|---|
| 1.21.1 Fabric | 2.73 → 2.75 ms | 4.27 → 4.32 ms |
| 1.21.1 NeoForge | 2.60 → 2.50 ms | 4.20 → 4.10 ms |
| 26.3 Fabric | 2.70 → 2.66 ms | 4.28 → 4.27 ms |
| 26.3 NeoForge | 2.72 → 2.98 ms | 4.69 → 4.89 ms |
No measurable difference on any of the four: the differences stay within the spread between rounds, and the +10 % on 26.3 NeoForge comes from a single round. The crafter rule was added afterwards (one block tag check when a port looks up its target block) and was not measured separately. Details are on the wiki page Performance. The numbers only apply to that hardware and that test scene; they are no promise of 20 TPS on any hardware.
Compatibility
- Built-in integrations: Jade, CC: Tweaked, Open Parties and Claims, FTB Chunks, FTB Teams and permission mods as in 1.3.0, now also JEI, REI, WTHIT and Flan, wherever they exist for the Minecraft version.
- Every 1.4.1 file was started unchanged with the real partner mods of its Minecraft version (dedicated server, client and game tests): RELEASECHECK_PENDING.
- New partner runs:
- JEI, REI, WTHIT, Flan, Carry On and Tom's Simple Storage on all five versions, both loaders. The client runs end at the title screen; the recipe viewer drag and the WTHIT tooltip in a world are part of the manual test.
- Tech Reborn (Fabric 1.21.1, 26.1.2, 26.2, 26.3): energy storage and tank in the round trips; its storage units are not covered automatically.
- Powah! now also on NeoForge 26.2 and 26.3 (alpha builds).
- CC: Tweaked 1.121.0 (beta) on 26.3, both loaders. It now also starts on NeoForge 26.3, so Pipster's support for it is part of the partner runs there too.
All Relations
- All Relations
- Embedded Library
- Optional Dependency
- Required Dependency
- Tool
- Incompatible
- Include
This mod has no related projects