Pipster
Readable pipes for items, fluids, gas and energy, with filters right at the port, channel-based tesseracts and the Energy Pulse Amplifier. Works on Fabric and NeoForge.
🚧 Version 1.5.0 – In Development
I'm currently working on Pipster 1.5.0, featuring coloured pipes and cables, improved item routing, crafter enhancements, in-game settings, comparator support, EMI and The One Probe integration, and various fixes.
Since I'm developing Pipster in my spare time alongside my regular job, this update will take some time. No release date yet. Thanks for your patience and support! ❤️
New in 1.4.1: quicker wrench controls, separate filters for insert and extract, a choice of the target block's face (brewing stand: ingredients only from the top), and pasting a profile also installs the cards from your inventory. New optional support for JEI and REI (drag an item or fluid into a filter field), WTHIT and Flan. Worlds from 1.3.0 load without conversion. 1.4.1 is made for Minecraft 1.21.1, 1.21.11, 26.1.2, 26.2 and 26.3 (26.3 now needs Fabric API 0.165.2 or NeoForge 26.3.0.100); for other versions, Pipster 1.2.0 stays available.

- Pipes look like pipes. Every pipe and cable is a real, narrow shape (no full blocks), with a bolted flange where it connects to a machine. The tube shows the kind, the colour of the node and flange shows the tier.
- Four kinds, five tiers. Item pipes, fluid pipes, gas pipes and energy cables, each from Copper (T1) to Quantum (T5), and energy cables up to Singularity (T6). Upgrade placed pipes in place with a bolt; they keep their settings and contents.
- Filters live in the port. No filter blocks in the way. Put a filter card straight into the port where the pipe meets the machine.
- Tesseracts. Send resources through named channels: any distance in one dimension (Resonant) or across all dimensions (Quantum).
- Overcharge. The Energy Pulse Amplifier stores energy and releases it in short, powerful pulses.
- Built for servers. Everything runs on the server in bounded steps. Pipes do not tick, and Pipster never loads chunks.

How to recognise them (new look in 1.3.0): item pipes are square copper tubes, fluid pipes round iron-grey tubes, gas pipes round petrol (dark teal) tubes, and energy cables narrower square anthracite cables with fine insulation rings. The node in the middle and the flange show the tier colour (in brackets below). A flange with four bolts only where a pipe meets a machine; between two pipes a slim coupling. Throughput, tiers, recipes and behaviour did not change.
- Copper (copper): 2 items/t, 100 mB/t, 1,000 E/t
- Reinforced (gold): 8 items/t, 400 mB/t, 8,000 E/t
- Precision (emerald green): 32 items/t, 1,600 mB/t, 64,000 E/t
- Resonant (lapis blue): 128 items/t, 6,400 mB/t, 512,000 E/t
- Quantum (amethyst purple): 512 items/t, 25,600 mB/t, 4,096,000 E/t
- Singularity (redstone red, energy cables only): 32,768,000 E/t
- Supercalifragilisticexpialidocious Energy Cable (magenta with white bolts, creative only): 1,000,000,000,000 E/t; no recipe, drops nothing
Gas pipes move as much gas per tick as fluid pipes move mB. Throughput is shared per pipe segment, so a bottleneck is a real bottleneck. Nothing ignores limits: even the creative cable has a finite rate, and a thinner cable between two of them keeps its own limit.

Controls since 1.4.1:
| Action | Effect |
|---|---|
| Right-click a port | next mode: Insert → Extract → Both → Off (an accept port: Accept ↔ Off) |
| Sneak + right-click a port | open the port screen |
| Left-click an arm (with or without a port) | disconnect exactly that arm (also splits networks) |
| Left-click the centre on the side of a disconnected arm | connect it again; this works from either of the two pipes |
| Sneak + left-click a port | paste the active copy profile, with cards from your inventory (see Copy and paste) |
| Right-click an arm without a port, or the centre | show the network in the action bar (network number, tier, nodes, ports, segment use) |
| Sneak + right-click an arm without a port | disconnect or reconnect it, as before 1.4.1 |
| Sneak + right-click the pipe centre (anywhere else) | dismantle the pipe |
| Sneak + right-click air | switch to the next of 3 copy profiles |
- The action bar says what happened: "West: Extract", "Arm disconnected", "Arm connected", "Profile 1 pasted".
- The wrench never breaks a pipe by left-click. To remove a pipe, sneak + right-click its centre or break it without the wrench.
- A held left-click in creative mode acts only once.
- The tooltip of the wrench lists these controls.
You need build permission at that spot. The server checks distance and permission for every action.
Classic controls (Pipster 1.3.0 and older, or server option)
These are the controls of Pipster 1.3.0 and older. From 1.4.1 on, a server can switch back to them with wrenchClassicControls=true in config/pipster-server.properties (see Configuration). Default: false.
| Action (classic controls) | Effect |
|---|---|
| Right-click a port | open the port screen |
| Sneak + right-click an arm | disconnect exactly that arm |
| Sneak + right-click the centre on the side of a disconnected arm | connect it again |
| Sneak + right-click the pipe centre (anywhere else) | dismantle the pipe |
| Sneak + right-click air | switch to the next of 3 copy profiles |
| Left-click | 1.4.1 with classic controls: nothing, the wrench never breaks pipes. 1.3.0 and older: breaks the pipe like any item |
With classic controls there is no quick paste by sneak + left-click; use the Paste button in the port screen. The wrench tooltip still lists the 1.4.1 controls, because the client does not know the server setting.
- Port screen: redstone control, priority, distribution (round robin, nearest, sticky), the face of the target block, and a status line that says why nothing moves.
- Accept port: a side next to a block that pushes but has no storage of its own (AE2 Export Bus, Create funnels, Oritech item and fluid pipes) can be set to Accept. It takes what the block pushes in and never pulls.
- Copy and paste port settings with 3 profiles. Since 1.4.1, pasting also moves matching filter and rule cards from your inventory into the port; cards are never created.
- Crafters (since 1.4.1): pipes fill a crafter evenly, one item per slot, and take the result it pushes out of its front; they never empty its crafting grid.

- Basic (9 rules): exact item, fluid or gas; allowlist or denylist
- Advanced (27 rules): tags, whole mods, exact components such as enchantments
- Precision (54 rules): "keep 64 in the source", "fill the target up to 256"
- Rule Card: per-port rate limit and energy reserve
Patterns are ghost items: nothing is used up.
Fluid and gas pipes have a filter field with suggestions. Type a name and pick a fluid, gas or (with Mekanism) chemical from the list, no filled container needed. # lists tags, "Everything from <mod>" covers a whole mod, and entries with the same name show their mod in brackets.</mod>

- Resonant Tesseract: any distance, same dimension, T4 speed
- Quantum Tesseract: all dimensions of the server, T5 speed
- One channel per resource type per tesseract, private, invite-only or public, filters per side

The Energy Pulse Amplifier takes energy evenly, stores it at 90 % efficiency and releases it for a short time at a higher rate than it takes. It never creates energy.
- Front = output, every other side = input. The pulse respects the cable at the front, so a thin cable limits it; on Singularity and creative cables the amplifier's own pulse limit applies.
- Capacitor Banks around it add capacity and pulse power (up to 8 banks).
- Modes: Auto, Charge, Pulse (fired by redstone or the Fire button).
- Screen: stored energy, input and output per tick, efficiency, banks, pulse limit, mode, status (Charging, Ready, Pulsing, Empty).
- Looks and sounds: a coil that spins faster with the charge and glows during a pulse, charge lights, sparks and own sounds.
- Defaults (server config): 1,000,000 E store, +1,000,000 E per bank, 16,000 E/t input, pulse 32,000 E/t + 4,000 E/t per bank.
- Breaking it keeps the energy in the item; creative pick-block never copies it.


- Pipster: readable pipes for items, fluids, gases and energy.
- QNet: industry, power, storage, logistics and dimensional extraction in one mod.
Pipster itself needs none of them.

Pipster connects to other mods through the standard interfaces of each loader:
- Fabric: Transfer API for items and fluids, Team Reborn Energy for energy (included). Extract ports actively pull energy (can be switched off in the config).
- NeoForge: Item, fluid and energy capabilities.
- Gas: Pipster's own small gas API, fluids tagged as gaseous, and Mekanism chemicals (NeoForge 1.21.1).
Tested Compatibility
Tested with real mod JARs on dedicated servers and clients, including automated game tests that transfer items, fluids and energy through supported blocks and back without loss or duplication. Availability varies by Minecraft version and loader.
- Storage Drawers: Drawers and compacting drawers.
- Sophisticated Storage: NeoForge on all five versions; Fabric 1.21.1 (unofficial port).
- Energized Power: Battery box and fluid tank.
- Oritech: Energy storage and tank.
- Powah!: Energy cell, including NeoForge 26.2 and 26.3.
- Mekanism: Energy cube, fluid tank and chemicals through gas pipes (NeoForge 1.21.1).
- Create: Fluid tank; the Mechanical Arm can target item pipes (NeoForge 1.21.1).
- Tech Reborn: Fabric 1.21.1, 26.1.2, 26.2 and 26.3.
- Carry On: All five Minecraft versions.
- Tom's Simple Storage: All five Minecraft versions.
- Applied Energistics 2 (also with Applied Mekanistics) and Immersive Machinery: Start and run alongside Pipster.
Not every block of these mods is covered. Please report compatibility issues.
Built-in Optional Integrations
These integrations activate automatically when the corresponding mod is installed. None of these mods are required to use Pipster.
- Jade: Displays port modes and status, accessible tesseract channels, and pulse amplifier charge and status.
- WTHIT: Additional information about Pipster blocks and their status.
- JEI and REI: Recipe viewer integration.
- Flan: Claim protection integration.
- CC: Tweaked: Computers can read pipes, tesseracts and pulse amplifiers. Ports can be controlled using the "Computer" redstone mode.
- Open Parties and Claims (OPAC) and FTB Chunks: Pipes respect land claims and cannot extract from protected inventories without permission.
- FTB Teams and OPAC parties: Teammates can share channels, tesseracts and pipes, including previously placed ones.
- LuckPerms and other permission mods: Support for the
pipster.adminandpipster.commandpermission nodes. Operators retain these permissions without an additional permission mod. - Wrench compatibility: The Conduit Wrench is recognized as a wrench by compatible mods.
Integration availability depends on the Minecraft version and loader. FTB Chunks and FTB Teams are supported on Minecraft 1.21.1, 1.21.11 and 26.1.2.
For exact versions and testing details, see Supported-Versions.

Minecraft 1.21.1, 1.21.11, 26.1.2, 26.2 and 26.3, Fabric and NeoForge. One file per Minecraft version and loader. Before release, each file is tested on its version: client and server start, automated game tests for transport, throughput limits, filters, tesseracts, the pulse amplifier, claims and teams, saving and loading, plus runs with the partner mods above.
Release check of the ten 1.4.1 files: passed on 2026-11-16: each of the ten files on its Minecraft version (dedicated server, client, all game tests) and with the partner mods of that version. 318 runs passed, none failed; 10 runs could not take place because Open Parties and Claims cannot start on a game-test server (it is checked on the dedicated server instead).
- 1.21.1: pipster-1.4.1+mc1.21.1-fabric.jar, pipster-1.4.1+mc1.21.1-neoforge.jar
- 1.21.11: pipster-1.4.1+mc1.21.11-fabric.jar, pipster-1.4.1+mc1.21.11-neoforge.jar
- 26.1.2: pipster-1.4.1+mc26.1.2-fabric.jar, pipster-1.4.1+mc26.1.2-neoforge.jar
- 26.2: pipster-1.4.1+mc26.2-fabric.jar, pipster-1.4.1+mc26.2-neoforge.jar
- 26.3: pipster-1.4.1+mc26.3-fabric.jar, pipster-1.4.1+mc26.3-neoforge.jar
- NeoForge 26.1.2, 26.2 and 26.3 need at least 26.1.2.122, 26.2.0.93 and 26.3.0.100. Fabric 26.3 needs at least Fabric API 0.165.2+26.3.
- Other Minecraft versions (1.21.2 to 1.21.10, 26.1, 26.1.1): use Pipster 1.2.0. It stays available and keeps working. Builds for further versions only come back if enough players ask for them in the issue tracker. Request a Minecraft version

The development build of 1.4.1 (without the later crafter rule) was measured against 1.3.0 on 2026-11-14 (Intel Core i7-13700H, 50,000 pipes with 500 active ports, 1.21.1 and 26.3, both loaders, alternating runs): no measurable difference. It needed about 2.5 to 3.0 ms per tick on average and 4.1 to 4.9 ms in the 95th percentile (medians of the rounds). The numbers below were measured for 1.1.0.
Measured for 1.1.0 on an Intel Core i7-13700H with dedicated 1.21.1 and 26.3 servers, both loaders:
- 10,000 idle pipes: about 0.01 ms per tick
- 10,000 pipes with 100 active ports: about 0.8 to 1.2 ms per tick (95th percentile)
- 50,000 pipes with 500 active ports: about 3.4 to 5.0 ms per tick (95th percentile)
1.2.0 compared with 1.1.0 (same machine, 50,000 pipes with 500 active ports, alternating runs): 8 to 11 % less time per tick on 1.21.1 (both loaders) and 26.3 Fabric, no measurable change on 26.3 NeoForge, and less than half the memory per tick on 1.21.1 Fabric.
That is one machine and a few test scenes, not a promise for every server.

- Fabric: Fabric API. Team Reborn Energy is included.
- NeoForge: nothing else.
- Install on both client and server.
- Optional: Jade, WTHIT, JEI, REI, CC: Tweaked, Open Parties and Claims, FTB Chunks, Flan, FTB Teams, a permission mod, Create, Mekanism.


You may include Pipster in any modpack, public or private, free or paid, as long as the jar files stay exactly as published.

Pipster is made by cptgummiball (bandlaufwerk at CurseForge). All rights reserved: modifying, decompiling or re-uploading Pipster outside of modpacks is not allowed. Mod developers may compile against the Pipster API. Full license: https://github.com/CptGummiball/Pipster/blob/main/LICENSE