PlateSmith Nameplates

Design your own nameplates in a live visual editor: drag parts into place, style them and add colour rules. Threat on every plate for tanks and DPS, cast bars, buffs and debuffs, quest markers, preset looks and threat windows.
Back to Files

v1.4.1

File namePlateSmith-v1.4.1.zip
Uploader
TeamSquadIOTeamSquadIO
Uploaded
Nov 13, 2026
Downloads
503
Size
3.1 MB
Flavors
RetailForever
File ID
9597231
Type
R
Release
Supported game versions
  • 12.1.0
  • 1.60.1

What's new

PlateSmith changelog

Each release lists what players will notice. CurseForge shows this file as the release notes.

1.4.1

New

  • Class icon. A player's class emblem on their plate. Add it in Studio › + Add › Icons › Class icon, on the Players tab, the Enemies tab or both: on Enemies it shows on enemy players only, never on NPCs. It sits left of the level (and of the PvP icon on Players) and can be moved, sized and hidden like any part. Where the game keeps a player's class hidden from addons, no icon shows. It is off until you add it, so your plates look as they did.

Changed

  • Threat breakdown, pull by pull. The window now lists your last ten pulls down its left side, each named by the mob you had the most threat on (with "+2" for two more), its length, estimated threat and threat per second; click one to see it. Each ability is a bar sized by its threat, with its threat, share and threat per second; hover a bar for the working (damage times modifier, casts, threat per cast). An ability whose modifier or formula is not known yet shows in red.
  • Threat breakdown counts Cat Form. Your threat in Cat Form is now counted at x0.71 (Classic's figure); before, the estimate ran about 1.5 times the game's own.
  • Threat breakdown: group replay. A second tab, Group replay, plays back the whole group's threat on your target through the pull: a graph with a line per member in class colours (click or drag it to move through the pull, or press Play, at up to 8x), the group at that moment as bars (who has aggro, and everyone else's share of their threat), and a list of each time aggro changed hands (click one to jump there). It is recorded while you fight, on whatever you have targeted, where the game lets addons read the group's threat (not in some instances).

Fixed

  • Cast bar time left shows on Forever. With Show time left on, enemy cast bars showed the spell's name but never the time left while fighting (Studio's preview showed it): the game hands the time over in a form PlateSmith turned away. Reported, with the fix, on GitHub (issue #1).
  • What's new no longer blocks the game. The window that shows once after an update dimmed the whole screen and caught every click until you closed it; now only the window itself takes clicks and the game stays usable round it.
  • Objects that appear in combat get their plate back. An object that turned up mid-fight (a dropped pouch, say) showed an empty plate with no name until you walked away and back: in combat the game hides that it is an object, so it was drawn as a creature. When combat ends, PlateSmith now checks every plate again and draws it properly.
  • Spotlight box covers a hidden name. When the game keeps a plate's name hidden from addons, the target spotlight box now still reaches the name's top instead of stopping at the health bar.

1.4.0

New

  • Threat breakdown. A threat window's title menu › Threat breakdown...: your own threat for your last pull, worked out from Blizzard's damage meter (your damage per ability, once combat ends) and your casts, with each ability's modifier (Bear Form x2.15, Maul and Swipe x1.75, Primal Bite x3, Faerie Fire, Demoralizing Roar), threat per second, rage from damage taken, and the game's own threat where it can be read. Also your armor reduction against the mob, what attack power adds, and your last ten pulls.

  • Incoming heals and absorbs on health bars. Studio › Health bar › Incoming heals: All heals draws the heals on their way to the unit as a soft green bar after its health, the way the game's unit frames do; Others' heals only leaves out your own. Absorbs adds shields (pale blue, after the health and heals) and heal absorbs (dark red, over the end of the health). Each has its own colour, and each design (World, Dungeons & raids, PvP, City, Enemy players) has its own setting, with Reset to World. Both are off until you turn them on, so your plates look as they did. The game keeps the amounts hidden from addons, so the game itself draws them; where it gives nothing (or, for Others' heals only, cannot tell yours apart), nothing shows. Blueprints carry them. PlateSmith's own plates only: Blizzard's (friendly plates in dungeons) are left as they are. Copy to all plate types gives the same design of every other plate type the open one's heals, absorbs and colours in one step.

  • Totems, styled on their own. The Enemies and Friendly NPCs tabs have a Type beside Design, as Objects do: All NPCs or Totems. With Totems open, everything you change (parts, sizes, colours, rules) is for totems only, in every place, and the rest of the tab's plates stay as they are; enemy shamans' totems (Enemies) and your group's (Friendly NPCs) each have their own. Plate settings there has Display: Plate (the default: the Totems plate you designed), Icon (just the totem's icon), Icon and name, Name only (no health bar or level) or Hidden (no plate), so a party shaman's Mana Spring Totem can be just its icon. The icon is a part of its own, Totem icon (+ Add › Shape, or added for you when you pick Icon): move it, size it, pin it, give it rules like any image; any image's From › Totem shows it too. + Add greys out what a totem never has (cast bar, auras, power and threat parts), so what you can add reads at a glance. The preview shows a totem. Reset to All NPCs takes Totems back, and Blueprints carry them. The icon is the totem spell's; a totem whose icon isn't known (a creature's own totem, or another language's name for one you don't have yourself) shows a plain totem icon. In dungeons & raids Blizzard draws friendly plates, which PlateSmith never hides: there it changes only PlateSmith's own optional text.

  • Colour the target edge. Studio › Plate settings › Target highlight has an Edge colour: Gold (the edge's own gold, as always and the default), Custom, Class, Reaction or Threat, the same choices as the soft glow's colour and picked the same way. It colours the bars' edges and the text's glow, and the health bar's outline on your target (with Soft glow behind too). Threat is your threat colour on the target while you're in combat with it, and the custom colour otherwise. Like the rest of the highlight it can differ per plate type and design. Gold edge is now called Edge. Your plates keep their gold until you pick another colour, and a Blueprint carries the colour only when it isn't Gold.

  • Threat text: Gap only. Studio › Threat › Display › Threat text has Gap only: just your margin, such as +1.2k or -300, without the %. Where the game keeps the gap private it shows what % and gap shows then: your threat %, or YOU. It is also the Tank window's threat column and the threat text on Blizzard's plates when you use that.

  • Minimap button. PlateSmith has a button on the minimap's edge, for minimaps without the addon menu: left-click opens Blueprint Studio, right-click Studio's Settings, and drag it to move it round the edge (it remembers where, for all your characters). Turn it off in Studio › Settings › Studio › Show minimap button. Round and square minimaps both work.

  • A profile for this character. Studio's Profile menu has New profile for <your character>...: a copy of the profile you're using, named after your character (or "Name 2" when that is taken), which this character then uses. Your other characters keep theirs. Like New and Duplicate it waits until your changes are saved or reverted.

  • Images: add your own bits to any plate. Studio's + Add › Shape › Icon is now Image, and an image's Picture comes From PlateSmith's pictures (the old twelve icons, plus an arrow, a spark and a soft glow), a game Atlas (type its name), Shared media from other addons (LibSharedMedia, when installed) or Mine, your own files. An image can be sized by its own Width and Height or Fit to part (as big as the part it is anchored to, with an Outset), Flipped, Turned by quarter turns, Tinted by its own colour, the bar it sits on, class, reaction or threat, and given its own Opacity (rules still go on top). Boxes can Fit to part and have an Opacity too. Your saved icon parts look exactly as they did.

  • Ride the bar's fill. A custom part pinned to a bar's top, bottom or right edge can tick Ride the bar's fill: it then sits at the end of the bar's fill and the game moves it as the health, power or cast changes. If not shown says what it does while that bar is hidden (a mob with no mana): Hide it, or ride the Next bar.

  • Decoration sets. + Add › Decoration set adds a ready-made group of parts in one step, as ordinary parts you can change: Target arrows (an arrow either side of the health bar pointing in, shown only on your target by a rule) and Fill marker (a spark riding the end of the health bar's fill).

  • My media. Studio › Settings › My media: name your own .tga, .blp or .png files from a folder inside Interface\AddOns\ and pick them in an image's Picture; each one in the list has its own Remove. They are yours (saved at once, never in a profile). A Blueprint carries only a picture's name, never a file, and the import review lists any picture you don't have; such a part draws nothing on the plates and shows a dashed red box in Studio.

  • Blueprints with images or parts riding a fill need PlateSmith 1.4.0 to show them in full; 1.2.0 to 1.3.2 import them and draw the part's icon (a skull, unless it was one of the twelve icons) on the bar's edge instead.

  • Corpse plates. Studio › Settings › Objects & interacting › Corpses › Corpse plates (off until you turn it on): a dead mob gets a small plate in your Objects style instead of an empty enemy bar, near or far: its name, no health bar or level. The game's own loot or skinning icon joins it once the game gives one, which it does for the corpse your interact key would use, so Corpse plates turn on Interact key › Interact key target and Plate on it while they are on (those rows read On, greyed; your own choices come back when they are off). A mob with nothing left to loot keeps its plain corpse plate, and holding Shift or walking away never turns it back into an enemy plate: only its death decides. If another addon turns one of those settings off, the section says so with a Turn them back on button. Clicking it loots as before: PlateSmith adds nothing that catches the mouse. Studio › Objects › Type has Corpses, so they can look different from chests; while Corpse plates are off, its Plate settings say so, with a Turn on button. Your own choice: not shared in Blueprints.

  • Out of reach. Studio › Objects › Plate settings › Object looks › When out of reach: an object, corpse or Friendly NPC with an action icon that the game says is out of reach can Dim the plate or Grey the name, as well as the game's greyed icon. Where the game can't say, nothing changes. Off (Game's icon only) until you pick one; Studio's preview shows it with Test values' new Within reach box, and Blueprints carry it.

  • "Too far" you can place and style. Studio › Objects › + Add › Text › Range (off the plate until you add it): the game's in-reach answer as Words ("Too far"), a Dot or both, shown out of reach, in reach or always, with your own words, colours, font and size, anywhere on the plate.

  • Range. Studio's + Add › Text › Range puts a range part on Enemies, Enemy players, Players or Friendly NPCs (on Objects it shows whether you can reach the object instead). Display: a Dot, the Distance (such as <30, or 30+ past your longest spell) or Dot and distance; Show: Out of range (the default), In range or Always; an In range colour (green) and an Out of range colour (red), and the font, size and place of any text part. It hides while the range is unknown (not checked yet, or the game keeps it), so it never guesses. Off on every plate until you add it; Test values' In range previews it, and Blueprints carry it.

  • Range from your spellbook. Whether a unit is in range now comes from every spell you know with a range of its own: harmful spells on enemies, helpful ones (heals, buffs) on Players and Friendly NPCs, one for each distinct range. So the bands get finer as you learn spells, and talents that lengthen a range count. Learning a spell, a new level and a talent or spec change update it. A spell with a minimum range (Charge, Auto Shot) that says no may mean too close, so PlateSmith never reads that as out of range. Classes with no helpful spell for others (hunters, rogues, warriors) get the game's follow distance for friends out of combat. Where the game keeps the answer in combat, it is unknown and nothing changes. Fade out of range still fades enemy plates only.

  • Range bands. New rule and custom text words: range.band is melee (within 5 yards), near (20), far (within your longest spell) or out, and {range} writes it as text: the nearest reach the unit is within, such as <5, <20 or <30, or 30+ past your longest. They come from the ranges of the spells you know (and, out of combat, the game's duel and follow distances), so they are as close as your spells can tell, not exact yards. range.known says whether there is an answer at all, and unit.inrange works on Players and Friendly NPCs too. Range checks still run only while the Range part shows or something reads them, a few plates at a time.

  • Behind you. Studio's + Add › Icons › Behind you marks your target's plate while the game says it is behind the camera (it shows that plate at the screen's edge: Studio › Settings › Stacking & distance › Target behind you: range). Display: an Icon (an arrow pointing at the name) or Text ("Behind you"); For: Target only (the default) or Target and focus; and its Colour and size. Only the game's own yes shows it. The rule word unit.behind is true for your target's and your focus's plates. Off until you add it; Test values' Behind you (with Your target) previews it.

  • PvP words. pvp.sanctuary (the unit is in a sanctuary) and pvp.you (you are flagged for PvP yourself) for rules and custom text. Your own flag follows as it changes.

  • Targeted by: Count only. Studio › Targeted by › Display › Display › Count only puts one small number on the enemy's plate, such as 34, instead of a badge per member: how many of your whole group or raid (not you) target it. Only the answers the game gives are counted; nothing shows while no one does. Badges stay the default. Rules and custom text read it as targeted.count ({targeted.count}), and Test values' Targeted by previews it.

  • Creature type words. unit.creature for rules (beast, humanoid, undead, demon, elemental, dragonkin, giant, mechanical, critter, totem, notspecified and the rest: the same word whatever your game's language) and {creature} for custom text (the game's own name for it, in your language). They show nothing unless you use them.

  • + Word for rules. Beside each rule's condition, + Word lists the words a condition can use on that plate type, by topic as Settings › Help's rule words do, with what each means on hover. Pick one and it is added as a condition that works, ready to edit (range.band = melee, unit.creature = beast, pvp.you): where the cursor was, if a condition can start there, else after and. Rules › Presets has two new sets: Melee range colour (Enemies, Enemy players: a colour while the unit is in melee range) and Fade critters (Enemies, Friendly NPCs). Test values has Range (melee, near, far or out, which In range follows) and Creature to preview rules on them.

  • Level difficulty colours. Studio › Level › Display › Colour › Difficulty colours the level the way the game does: red, orange, yellow, green or grey for its level against yours, and red for ??. Each design has its own choice; Normal stays the default, so your plates look as they did. The looks colour the level gold with a rule, and a rule wins: the row says so, and a rule's Then now has Set difficulty colour too. Where the game hides the level, it keeps its normal colour.

  • Hidden auras. Studio › Settings › Aura defaults › Hidden auras: type a spell ID or an aura's name (any case), tick the plates it is hidden on (Hide on: Enemies, Enemy players, Players, Friendly NPCs; all by default) and Add; each one in the list has its own Remove. No plate shows it, and the row fills with the next aura instead. Good for Resurrection Sickness or Boosted Experience. It is yours on every profile, kept at once (nothing to Save) and never in a Blueprint. In dungeons & raids, and wherever the game keeps an aura's ID and name from addons, the game draws the aura icons itself and every aura still shows.

  • Friendly player plates for your group only. Studio › Settings › Behaviour & display › Where plates show › Friendly players: Everyone (as before, the default), Your group only or Your group & guild. Other players get no plate, and someone who joins your group gets one at once. It works on the plates PlateSmith draws; Blizzard's own (Show as Blizzard's plates, and friendly plates in dungeons & raids) are left as they are. Studio › Players › Plate settings › Friendly plates has the same Friendly players row. Not shared in Blueprints.

  • NPC titles under their names. Studio › Friendly NPCs › Title shows an NPC's title, such as <Flight Master> or <Innkeeper>, under its name, read from the game's tooltip. It is off until you turn its eye on, so your plates look as they did. Outside dungeons & raids, where Blizzard draws friendly NPCs.

  • Activity log. /ps diagnose › Activity: what changed, when, and who did it, for the "it turned itself off" moments. Game settings PlateSmith changes, nameplate settings another addon or the game changes (with the addon's name when the game shows it), profile saves and switches, Hidden auras, My media and the minimap button, logins and changes of place; the last 200, kept across reloads. The report carries the newest lines.

  • What's new, once per release. On your first login after PlateSmith updates to a new release, a small window lists the release's highlights, with Open Studio and Close (never in combat: it waits until the fight ends). Tick Don't show on startup and it stops; Studio › Settings › Studio › Notices › Show what's new when PlateSmith updates turns it back on, and Settings › Help › What's new... shows it any time. A new install doesn't get it.

Changed

  • Minimap button toggles. Clicked again, it closes what it opened (left: Studio, right: Settings); the addon menu's entry does the same.
  • Clicks pass round Studio. The clear margin around Blueprint Studio's painted frame no longer blocks what is behind it; the frame and its plaque still move the window.
  • Optional parts. Settings › Behaviour & display › Show on plates is now Optional parts and names each part as the tree does: Quest marker, Tagged indicator, Threat, Elite / rare mark, and the parts that start off: Title, Range, Behind you, Targeted by and Loose mark. Each box shows or hides that part on every plate type, as before; a part on no plate has + Add instead, which opens Studio and adds it there. Your saved eyes stay as they are.
  • + Add explains itself. Every entry in Studio's + Add menu has a line saying what it adds, and 1.4.0's new parts (Image, Range, Behind you, Decoration set) are tagged New. Objects' Range now starts off the plate like everyone else's, so + Add puts it on; a profile that already has it keeps it where it is.
  • Object looks in Studio. Fade objects you can't use yet and When out of reach are set in Studio › Objects › Plate settings › Object looks, beside the preview; Settings › Objects & interacting has a line for each that shows its value and opens it there. They are the same settings as before.
  • A tidier Settings list. Studio's Settings pages are grouped under Plates, Yours (Profiles, Hidden auras, My media, Studio) and Modules, each with an icon, the open page marked with a gold bar; Experimental and Help sit at the foot. A page's row shows how many of its settings you've changed from a new profile's.
  • Where plates show has its own page, under Plates after Behaviour & display. Behaviour & display no longer has the Target and Threat colours sections that only pointed elsewhere: search finds the target highlight in Plate settings and Threat colours in Modules › Threat. Your settings stay as they were.
  • Profiles in Studio. Studio › Settings › Profiles switches, creates, copies, renames and deletes profiles and sets automatic switching, in combat too; the Profile menu's Switch automatically... opens it. Game Options' Profiles page now opens it, as Threat's does.
  • Hidden auras moved from Aura defaults to its own page under Yours. Buffs and Debuffs › Display › Hidden auras... opens it. Your list stays as it was.
  • Threat breakdown from Settings. Settings › Modules › Threat › Threat windows has a Threat breakdown... button, the same window as the title menu's.
  • The minimap's addon menu opens Studio. Clicking PlateSmith there opens Blueprint Studio (right-click: its Settings), as the minimap button does, instead of Blizzard's Settings panel.
  • Search finds what you name. Studio's Settings search lists the settings whose own name (or a section's title) holds every word you type, so "friendly" no longer brings every row whose help mentions friendly plates. Where nothing is named that, it shows what mentions it in its help, and says so. Help's rule words come after the settings. It now finds every row of a part's inspector, such as Health bar › Incoming heals › Absorbs or Level › Display › Colour, and a part not on the plate (Add part: Range, Add part: Behind you), which picking adds. US spellings find the UK words ("color", "gray", "center"), and more settings answer to the words players use: "opacity", "click through", "con colour", "absorb", "minimap", "colorblind", "scale" and others.
  • Faster plates. Under PlateSmith's own plates, Blizzard's plate no longer runs as well: it was only made invisible, so the game kept updating its health, auras and cast bar for every plate. It is now switched off while PlateSmith draws that plate and switched back on when PlateSmith stops (Blizzard's plates with PlateSmith's extras, or a type you turn off). Nothing changes on plates Blizzard draws.
  • Clearer labels and help. A part's rows say Display for what it draws, Show for when and For for whom, so the Loose mark's Show for is now For. Long help on Totems, Corpse plates, Class colour, Hide unstyled names, the Level's Colour and the dungeon names test starts with one short line, then the detail. Studio's Design field is the same width on every tab. Custom text's ? lists every word it can write (, , and the rest), and paths in help name the real Settings page.
  • Dead mobs lose their plate. With Corpse plates off (the default), a dead mob no longer keeps an enemy plate with an empty health bar and its level: PlateSmith draws no plate for it, as the game's own classic plates show none. If you used those plates to find corpses to loot, turn on Studio › Settings › Objects & interacting › Corpses › Corpse plates. A player's body keeps its plate, and so does a unit the game doesn't say is dead. On Blizzard's plates with PlateSmith's extras nothing changes.
  • Threat colours on tagged mobs. With Grey when tagged by others and threat colours on the health bar, a mob someone else tagged keeps its threat colour, darkened, instead of plain grey, so you still see who holds it. Without threat colours it is grey as before.
  • Your target always has a plate. With Friendly players set to your group only (or group & guild), a player you target gets a plate too, so you can see who they are, and loses it when you target someone else.
  • Dropdown lists match their field. A dropdown's list in Studio is as wide as its field, no longer wider and past the window's edge.
  • Aura stacks show. Buff and debuff icons on the plates show their stack count in the top right corner, such as Lacerate's or Sunder Armor's, in and out of combat (where the game lets addons show it).
  • No empty gap under a bear's target. A druid fighting out of Cat Form no longer gets an invisible combo points row on the target's plate: the game hides the count in combat, so the row only held its place, and Threat (or whatever sits under it) stayed pushed down. Combo points left from Cat Form show again in Cat Form, and out of combat in any form.
  • Threat text closes up in a stack. A threat text whose number the game keeps hidden (in a dungeon, say) could not be measured, so it left its stack and sat at its old spot with a gap above it, even with the cast bar gone. It now takes its place under the part above it.

1.3.2

New

  • Class colours for enemy players. Studio › Enemy players › Health bar and Name each have a Class colour box: ticked, an enemy player's bar or name is in their class colour instead of red or yellow. It is off until you tick it, so your plates look as they did.

  • Class colour on Players. Studio › Players › Health bar and Name have the same box, ticked, as friendly players were always class coloured. Untick it for the friendly blue instead. A group, guild or friend colour still comes first while Group, guild & friends come before class colours is on.

  • Your own class colours. Studio › Settings › Player colours › Class colours has a colour for each class, Blizzard's until you change it, and Reset to Blizzard's: for anyone who finds two classes hard to tell apart. They are used wherever PlateSmith draws a class colour: the health bar and name, the soft target glow's Class colour, the Targeted by badges, the target's name and combo points' class colour. Blueprints carry them. Where the game keeps a class private, the game's own class colour shows.

  • Update a profile to its look's latest version. A profile made from a look whose style has since changed shows Profile › Update to the latest <Look>... (new version) in Studio. The first time you open Studio after a look gets a new version, a small What's new window lists what changed, in a few lines, and says nothing changes until you choose: Review changes... or Not now. It shows once per profile and version, never in combat or with unsaved changes. Untick its Tell me when a look has a new version (also in Studio › Settings › Studio) and it stops for every profile; the Profile menu still offers the update. Review changes... opens the import review with the look's latest version: see what it would change on your profile design by design, pick the sections, and Update selected. General settings (Where plates show, Clicking, fonts, threat colours) stay unless you tick them. Its What's new? shows the same notes, and Show › The look's own changes draws what the look itself changed since your version. It is an unsaved change: Save keeps it, Revert undoes it. Profiles made before looks kept a version get Update to a look's latest style... with a look to pick.

  • Objects › Copy style from a look now uses the same route, for the Objects only.

  • Rules can say = true and = false. A flag can be compared, as other addons write it: pvp.flagged = false (or == false, != true) is the same as not pvp.flagged. Where the game hides the answer it is still unknown, so the rule does not apply either way.

  • Rules can set the class colour. A rule's Then has Set class colour: the part takes the unit's class colour (yours from Settings › Player colours › Class colours, else Blizzard's) while the rule applies. Where the game keeps the class private, the game's own class colour shows; a unit with no class keeps the part's own colour.

  • The Name has its own Colour. Studio › Name › Colour with Custom: the name in the colour you pick instead of its usual one (a group, guild, class or reaction colour, an object's gold). Class colour, while ticked, wins over it, and a PvP-flagged ally's PvP colour, threat colours and colour rules still win over both.

  • Studio says when a rule overrides a colour. Under the Name's and the Health bar's Class colour and Colour (Custom), a line says when a colour rule on that part covers it, for example "A rule sets this Name's colour (while pvp.flagged = false), so its class colour shows only where that rule doesn't apply.", with Show rule to open that rule.

  • A rule reference. Studio › Settings › Help lists every word rules and custom text can use, by topic (Unit, PvP, Health & power, Cast, Threat, Quest, Level, Objects, You): its old name, what it means, its kind, an example and the plates that have it, then and, or, not, = true / = false and how values the game hides fail closed. What can I use? in a part's Rules opens it. The README has the same list.

  • Rules › Presets › Built in opens the options that replaced the old presets: Colour by threat, the Cast bar's Colour by interrupt, the Health bar's Grey when tagged by others, and Fading. It adds no rules.

  • New PvP words for rules and custom text: pvp.ffa (the unit is flagged for free-for-all PvP) and pvp.faction (alliance, horde or neutral: pvp.faction = horde, or {pvp.faction} in custom text).

  • Choose where a PvP-flagged ally's colour goes. Studio › Settings › Player colours › PvP › PvP colour goes on (and the PvP icon's Goes on in Studio): Automatic (as before: the health bar, or the name where the bar has a colour of its own, such as its class colour), Health bar, Name or Both.

Changed

  • Clearer rule words. Rules and custom text have names that say what they are about: unit.elite, unit.tagged, unit.target (it is your target), cast.active, cast.interruptible, pvp.flagged, quest.needed, you.combat (you are in combat), you.hastarget and so on. The old words (elite, tagged, targeted, casting, pvp, quest, combat, hastarget...) keep working forever: your rules, custom text and Blueprints are unchanged and behave exactly as before. tanking is now threat.holding, which it always was. Studio's help, the presets and the looks use the new words. In Test values, Tanking is gone (it was the same as Holding threat) and PvP flagged takes its place.

  • Enemy players' Name › Class colour works on every look. Each look's warm white enemy names are now the Name's own Colour (Custom) instead of a rule, so ticking Studio › Enemy players › Name › Class colour colours enemy players' names by class, and Studio no longer says a rule covers it. Mobs look exactly as before: the looks' Name › Threat is unticked, so their names stay warm white in a fight, as under the rule. Profiles made from a look keep their rule until you use Profile › Update to the latest <Look>.

  • The Blizzard look's friendly player names are white by the Name's own colour (Custom white, Class colour unticked) instead of a rule, so ticking Name › Class colour now simply works. They look as before: white, and a PvP-flagged ally's name in Blizzard's green. Profiles made from the look keep their rule until you use Profile › Update to the latest Blizzard.

  • A Blueprint whose rules or custom text use a new word is shared as version 4, which PlateSmith 1.1.1 refuses whole instead of failing on one rule; one written with the old words is shared exactly as before.

  • Settings › Relationships is now Player colours, and Colour social relationships (it was under Behaviour & display › Names) has moved there as Group, guild & friends come before class colours. It is the same setting with the same value, so nothing changes.

  • Where the game keeps a player's class private, a class-coloured name or health bar now takes the game's own class colour instead of turning blue.

  • Each look's object plates match its enemy plates. A chest's or herb's box now takes the look's own style: the name in the look's enemy name font, size and outline, the Status text in its smaller text, and the box in the look's bar colours and frame (Bold's heavy black frame, Tank's dark red edge, Minimal's faint fill, Blizzard's rounded level box). Herbs stay green, ore grey and so on.

  • The Action icon sits beside the box, just right of it like a level or quest icon beside a plate, instead of inside it. This is for new profiles and the looks; your existing profiles keep their icon where it is.

  • Threat colours, Grey when tagged and aura sources are now set per plate type and design. Each was one setting for the whole profile, so unticking it on Enemy players turned it off for the Enemies and every design too. Now Studio's Health bar › Threat (and the new Threat edge), Name › Threat, Health bar › Tagged, and Buffs / Debuffs › Source belong to the design you have open: for example threat colours on the Enemies but not on Enemy players, or only your own debuffs on mobs but everyone's on enemy players in battlegrounds. Like the Colour row, a design follows World (Enemy players follow the Enemies) until you change it, shown by the gold mark with its Reset to World / Reset to Enemies arrow. Colour by threat (Settings › Modules › Threat) is still the one switch that turns threat colours on or off everywhere; its Apply to now says where each part takes them, and Settings › Auras says which source the designs use. Your profiles and Blueprints look exactly as before: each plate type keeps the value it had. Older Blueprints import the same way.

  • The note under a setting that every design shares now says so plainly: Shared by every plate type and design.

Fixed

  • Cancelling Cultivation no longer marks the herb. WoW Forever says the spell succeeded a moment before its channel starts, so a herb said Cultivated even when you stopped casting. A herb is now marked only when the channel runs to its end and the spell's cooldown has started (a cancelled cast starts none).
  • A one-digit level's box is as wide as a two-digit one. A level box behind "9" was narrower than behind "60"; short levels now sit centred in a box of the same width (longer text such as 60+ keeps its own).

1.3.1

Fixed

  • Herbs say what they need without Herbalism. A character without Herbalism saw no Status text on a herb the original game's data doesn't list, such as a Wilted Peacebloom, although the game's tooltip says "Requires Herbalism". It now says Requires Herbalism in red. Mining works the same for a character without it.
  • A vein's level after hovering it. WoW Forever's tooltip says "Requires Mining" without a level; after you hovered a vein, its Status text showed that line instead of the level the original game's data gives, such as Mining 75 on a Silver Vein. The level now stays.

1.3.0

New

  • Four new ways to mark elites, rares and bosses. The Elite / rare mark's Style (Studio › Enemies › Elite / rare mark) now offers, besides Blizzard icons, Words and Letters:
    • Classic dragon: the classic client's gold dragon (silver for rares and rare elites) wrapped round the level, which moves to the health bar's right end; a world boss shows its skull in the level's place inside the gold dragon.
    • Before the name: the small winged icon (a skull for a boss) right before the name, at the name's text height, with the level before it; on a normal mob the level closes up to the name.
    • Level suffix: no icon; the level reads 60+ (gold), 60R (silver), 60R+ (silver with a gold +), and a boss's ?? turns red.
    • Bar frame: no icon; a thin gold (elite) or silver (rare) frame round the health bar, silver round gold for a rare elite, and a 2 px dark red frame with a black line inside for a boss. Your target's gold edge, the tank warning and Threat colours on the bar's edge stay the outermost line, outside the frame. Each style says what it does in the menu. Classic dragon and Before the name place the mark and the level themselves: your own placement of those parts is kept and comes back when you pick another style (Placement says why it is unavailable meanwhile). Where the game keeps the classification private, no mark shows; a protected level shows on its own (in the mark's colour with Level suffix when the classification is known).
  • Icon size for the Elite / rare mark: Auto (18 px beside the bar, the name's text height before the name), 18 px or Text height.
  • Test values › Elite / rare: one choice for the sample's classification (Normal, Elite, Rare, Rare elite, Boss) in place of the Elite, Rare and Boss boxes, so the preview shows each style at once.

Your profiles keep Blizzard icons and look exactly as before, and the looks still use Blizzard icons. Blueprints using a new style or Icon size are !PSB4!.

  • Shape the soft target glow. Plate settings › Target highlight (with Soft glow behind) has new rows, per plate type and design:
    • Glow wrap: Fit to parts follows your plate's parts as they show and hide, as before, and Glow parts picks which: Name, Health bar, Power bar and Cast bar (all by default), so the glow can light just the name or just the bar. Fixed size is a box of your size centred on the health bar instead (140 x 40 to start: picking it clears Same width and height).
    • Glow width and Glow height (Glow width replaces Glow size): with Fit to parts, the room the glow adds around the parts, left and right and up and down, the same on both sides; with Fixed size, the glow's whole size. Same width and height (on) sets both with Glow width, as Glow size did; untick it to give Height its own slider. Glow offset X and Y still move the glow's centre. Your glows look exactly as before. Blueprints using any of these are !PSB4!. Studio's preview wraps the name's text as your plates do, not the wider box you grab it by, so a glow round just the name ends at the name.
  • Clicking: Settings › Behaviour & display › Clicking sets whether Friendly players, Friendly NPCs and Enemies (and Your own plate, where the game has a switch for it) are Clickable or Click through, separately from how they look. Studio's Players and Friendly NPCs tabs have the same choice as Clicks in Plate settings › Friendly plates, next to Show as. Each covers every plate of its kind, not one plate.
    • Friendly players: Click through turns on the game's "friendly players: names only" option outside dungeons & raids while PlateSmith draws them, which leaves their plates nothing to click; PlateSmith still draws its own look, names only or full plates.
    • Friendly NPCs and enemies: Click through shrinks the game's click area for them to nothing (or uses the game's click-through switch, on clients that have one). The game has one click setting for every friendly plate, so Friendly NPCs' Click through makes friendly players click through too: the Players row then reads Click through (shared with NPCs) and is locked until NPCs are clickable again. Friendly NPCs' choice applies outside dungeons & raids; enemies' everywhere. Clickable is the default everywhere, so nothing changes until you pick Click through. PlateSmith records the game's value first, waits for combat to end before changing it, and puts it back when you choose Clickable, turn PlateSmith off, switch profile or log out; Blueprints leave it out.
  • Objects tab: books, chests and quest objects get plates of their own. When the game gives an object a nameplate (a book on the ground, Shipment of Iron, Alliance Chest), PlateSmith drew it as an enemy: a red name, level 0 and an empty health bar. Objects are now a plate type of their own, with a fifth Studio tab, Objects: the object's name in gold in a small tooltip-like box (a dark background with a thin grey-gold edge), plus a quest mark beside it when the object is part of a quest; no level, bars, auras, threat or target highlight. Edit it like any plate type: the name's font, size and colour rules, the box (the Backdrop part, below), where the quest mark sits, and designs of its own for dungeons & raids, battlegrounds & arenas and cities & inns. Every look has an Objects style of its own (Blizzard's is closest to the game's tooltip, Minimal's a faint box); your profiles get the default above. Clicking an object still opens or loots it.
    • Backdrop (a new part, on the Objects tab): the box, like the game's tooltip. Fit to parts wraps the parts you tick under Style › Wraps (the name, the Status text and the Action icon by default; the quest marker too if you like) while they show, so a herb's box grows to hold its Status text and shrinks back when it hides, with Padding round them; with nothing to show it hides. Fixed size is a box of your own Width and Height that you place and drag like any part. Style it as a text's box (Square or Blizzard's Rounded, Fill, Border colour and width). The parts it wraps drag and nudge freely in the preview; it follows them. Every look's Objects style uses it, and the name has no box of its own there. Hovering anywhere on the box shows the object's cursor and tooltip.
    • Action icon: right of the name, inside the box, the game's own icon for what you can do with the object, the one your cursor shows over it: a herb, ore, a book, a chest, a quest. When the game says you cannot yet (a herb your skill is too low for), it shows its own "can't" icon; the part's Can't use choice shows that as the game gives it (the default), greyed, or hidden. Move it, scale it or turn it off like any part. Friendly NPCs have the part too, off: turn it on to see the game's talk, trainer, vendor or flight icon by their names (a Blueprint with it changed is !PSB4!). Where the game gives no icon, none shows.
    • Rules and custom text by what an object is: object.kind = herb (or ore, skin, loot, quest, inspect, interact, talk, trainer, vendor, flight, repair, mail, other), read from that icon, never from object names; object.unable (the icon says you can't yet); interact.inrange (within reach); object.id = 175734 (the object's ID from the game, to style one object of your choice) and unit.id (an NPC's); object.quest (the optional PlateSmith_QuestieDB companion lists the object in a quest: a quest in your log needs it, or it starts or ends one). {object.kind}, {object.id} and {unit.id} show them in custom text. == now works as =. Something the game does not say is unknown, so a rule on it does not apply.
    • Type beside Design: All objects, or one type of object as the game's icon says it is: Herbs, Ore, Chests & loot, Quest objects, Books & lore, Talk & services (a mailbox) or Other. Pick a type and change anything (the name's colour, font and box, the Action icon's size and place, which parts show, or Hide these plates under Plate settings › This type): that type keeps those changes and follows All objects in everything else, in every place (on top of a dungeon or city design). Changed rows get the gold mark, with Reset to All objects on each and for the whole type. An object the game gives no icon draws as All objects, and one that changes (a chest emptied) follows at once. Your profiles have no type changes, so every object looks as before; each look sets a few (herbs green, ore stone grey, chests gold, quest objects yellow, and the Status text on herbs and ore; Classic and Blizzard keep the game's gold names). Blueprints carry them (!PSB4!), imported with the context designs.
    • Status text (a new part, off on All objects, centred under the name inside the box): what the object needs and whether your skill reaches it, such as Mining 65 in the game's own gathering colours for your skill (orange: a skill point every time, yellow: most times, green: now and then, grey: no more, red: too low; hovering the plate adds your own skill and what the colour means). It comes from the game's own tooltip: hover one Tin Vein once and every Tin Vein's plate shows it from then on, in any profile (up to 300 objects are remembered for your account; never shared in Blueprints). The skill is found by your own skill names, in any language. Herbs and ore veins need no hovering: where the game's tooltip names no requirement (WoW Forever's shows only the name), the original game's levels are used, by the object's ID (a Tin Vein Mining 65, Liferoot Herbalism 150; from the open-source VMangos database via pfQuest, credited in the README). For anything else, until an object like it has been hovered, or for one that needs none of your skills, it shows nothing. Rules and custom text read object.skill (the skill it needs) and object.cangather.
    • Cultivation (the Tauren racial): if you know it, herb plates' Status text says Cultivate ready (green, beside the Herbalism part in its own colour) or Cultivate in 23m (the spell's own cooldown, following each minute while herbs are in view), and the herb you cultivated says Cultivated until it respawns. A herb above your level (its Herbalism skill / 5: a herb of 150 needs level 30) says Cultivate at level 30 in red. A herb you can cultivate is not faded by Fade objects you can't use, Herbalism or not. Rules and custom text read object.cancultivate; Test values' Cultivation ready shows it in the preview. Nothing changes for players without it.
    • Fade objects you can't use yet (Studio › Settings › Objects & interacting, off unless a look turns it on): an object whose icon says you can't use it yet (a herb above your skill) fades to half, unless your skill reaches it after all (object.cangather) or you can cultivate it.
    • Copy style from a look... (the Objects tab's Plate settings): gives your profile a look's Objects style (All objects, its types and the fade) without changing anything else. Your Objects designs for places stay. It asks first when you have changed the Objects tab; like any change it needs Save, and Revert undoes it.
    • Show the game's cursor and Show a tooltip (Studio › Settings › Objects & interacting › When you point at an object's plate, both on): pointing at an object's name on its plate shows the game's own cursor for it, as over the object itself (gather, mine, read, loot, greyed when it is out of reach where the game allows it), and a small tooltip with its name, its type and, once one like it has been hovered in the world, what it needs. Clicking the object and turning the camera work as before. Nothing changes in combat. Kept by your profile, not shared in Blueprints.
    • Test values › Object (Herb, Ore, Book, Chest, Quest, Talk, Trainer) and Can't use yet show each in the preview with the game's icon and its Status text; choosing a Type picks its sample.
  • New profiles remember their look. A profile made with Profile › New from preset or a first-run look card records which look it came from; the Profile menu's tooltip and /ps diagnose name it. Your existing profiles have none, and it is never shared in Blueprints (an import keeps yours).
  • Studio › Settings › Objects & interacting, a new page for everything about objects that is not their look (the Objects tab's Plate settings keeps the design: Copy style from a look, This type, Scale, and an Object settings... button to this page). Object plates: Drawn by PlateSmith (the Objects design) or Blizzard's (the game's own object plate, untouched) and Fade objects you can't use yet. When you point at an object's plate: Show the game's cursor and Show a tooltip. Interact key: the game's own settings for the object, corpse or NPC your interact key picks, each Game's setting (the default: nothing changes) or a choice of its own: Interact key target (On or Off), Range (10 to 60 yards; WoW Forever appears to drop the target past about 15 yards whatever it says), Direction (Straight ahead, In front, All around), Out of reach (Only within reach, or Out of reach too), Plate on it, Icon over it, Icons on objects too and Icons on minor targets (On or Off). Range, Direction, Out of reach and Icons on minor targets are new. They are the same settings addons such as Loot Sparkles use: if another addon changes one after PlateSmith, PlateSmith follows it rather than setting it back, and it puts the game's value back when you choose Game's setting, Revert, turn PlateSmith off, switch to a profile that leaves it to the game, or log out. A row shows only where the game client has that setting. Where objects show at all is the game's: it has no switch for object plates. Blueprints carry your Objects design (!PSB4! when it differs from the default) but never the interact key settings.
  • Rescue, a third threat window mode. Pick Rescue in a threat window's menu, its mode button or Studio › Settings › Modules › Threat › Threat windows › Mode. It lists your group in a fixed order (a party as a list, tanks first; a raid as a grid, one column per group) and colours a member orange when they pull and red, with a pulsing glow, when an enemy is on them; a tank holding stays calm. Click a member to taunt their target (Warrior: Taunt, right-click Mocking Blow, Shift-click Challenging Shout; Druid: Growl, Challenging Roar, in Bear Form only, and a row's tooltip says when Bear Form is needed; Paladin: Judgement, Shift-click Blessing of Protection on them), or use Taunt my target in its header. Its settings: Layout, Show (Everyone, Healers only, Healers and ranged, My group only), In raids, Clicks, what each click casts, and three optional alerts: a sound (built-in, plus LibSharedMedia's sounds when it is installed), a flash of the window's border when someone newly gets aggro, and your taunt's cooldown in the header ("Taunt 6s", "Taunt ready"). A Rescue window holds still in combat (no moving, resizing or hiding until it ends; a drag or resize under way when combat starts ends there; its close button looks unavailable then) and catches up with group changes, newly learned spells and role changes when combat ends. Opened in an older PlateSmith, a Rescue window becomes a Tank window.
  • Skin Blizzard's damage meter (optional, off by default): Studio › Settings › Modules › Threat › Threat windows › Damage meter. Blizzard's damage meter takes the threat windows' look, so a threat window following it and the meter look like one set: the frame and title, the minimise, settings and session buttons, the bars and their dark track, the row and header text, the scroll bar and the breakdown pop-out, in Forge, Ledger or Glass (the theme of the threat window following that meter window, else of your first shown one; Forge for the other themes). Rows the meter adds later, a second or third meter window and a theme change follow. Only the look changes: Edit Mode still places and sizes the meter, and its clicks, menus and numbers are Blizzard's. Turning it off puts Blizzard's look back at once. The setting is for every character and is not part of Blueprints. It sizes itself to the members it lists; with nobody to list (solo) it keeps the size the window had and says "Not in a group. Rescue lists your party or raid.", and switching it to another mode gives that size back.
  • Blizzard, with PlateSmith extras is a real choice. With Who draws the plates set to it, Blizzard draws its own plates (PlateSmith never moves, resizes or restyles them) and PlateSmith adds its extras on top, attached to Blizzard's name and health bar. Choose them in Studio › Settings › Behaviour & display › Extras on Blizzard's plates, where a sample of Blizzard's plate shows each one:
    • Quest markers, left of Blizzard's name (with their progress where your Enemies' quest marker shows it).
    • Threat: Text (your threat % and lead over the name), Edge (a thin edge round Blizzard's health bar in the Threat colours for your role), Text and edge, or Off.
    • Target glow: the soft glow behind your target's plate, in your Target highlight's glow colour, size and pulse.
    • Loose mark (below), right of Blizzard's name. Objects (books, chests, herbs) keep PlateSmith's own plates, which have no Blizzard style. Blizzard already draws raid marks and elite icons, so PlateSmith adds none. Friendly plates in dungeons & raids are Blizzard's protected plates and get nothing. Beside another nameplate addon's plates only the quest markers and threat text show, as before. Your Who draws the plates is unchanged; a profile saved before keeps what this choice drew then (quest markers and threat text), and new profiles have all four. Blueprints carry the extras (!PSB4! away from that).
  • Loose mark. A new part on Enemies plates (+ Add › Icons): a small mark beside the name while a mob is loose, attacking someone who is not a tank (the Tank window's LOOSE), with two quick blinks as it gets loose. Its Display sets Show for (Tanks, the default, or Everyone), Icon (the game's alert or the Tank window's LOOSE icon) and Pulse. Where the game will not say who holds a mob, no mark shows. It is off in your profiles and in every look but Tank, which shows it (TAGGED moves after it and takes its place while the mob is not loose). Rules and custom text can read the same as threat.loose; Test values › Loose shows it in the preview (with You tank). Blueprints using its options are !PSB4!.
  • For addon authors: the module API is public. The download now carries Docs/MODULES.md (the versioned API reference, with a ten-minute first module) and Examples/PlateSmith_ExampleModule. Every call takes PlateSmith:Call and PlateSmith.Call alike; one ID grammar covers modules, tokens, facts, formatters, Blueprint fields and preview parts (older IDs still register); new helpers ReportError, Locale, IsReadable, ReadNumber, ReadText and InvalidateFact (read a module's fact again when no plate event says it changed). The QuestieDB companion uses only this public API. RegisterModuleSettings still works but is deprecated, and RegisterEditorComponent is documented as a preview part only.
  • Studio › Settings › Modules. A group at the end of Settings' categories (the list scrolls when it is long) with a page per module, each with its icon: Threat (PlateSmith's own), QuestieDB with the companion, and any addon that adds one. Module pages look and work like Studio's own: folding sections, ? help, Settings search, and they open in combat. A module's profile settings light up Save, Revert undoes them and Blueprints share them; settings a module keeps itself are saved at once and say so in their tooltip. A row's gold dot means unsaved changes; a module whose page cannot show is greyed, with the reason in its tooltip. For addon authors: PlateSmith:RegisterStudioSettings (Docs/MODULES.md).
  • Other addons' data in your custom parts. With an addon that provides them, a custom bar's Source can be its value (such as a cooldown), a custom icon's Picture its icon, and custom text's Source its text, listed by name beside PlateSmith's own; the preview shows them from the addon's samples. Test values gets a box for each such addon's yes/no fact, to try your rules on it. For addon authors: RegisterBarSource, RegisterIconSource.

Changed

  • The threat settings live in Studio › Settings › Modules › Threat. Your role (This character tanks, now in one place, with whom you are treated as now), Threat colours (from Behaviour & display, which keeps a link), Threat text & window colours, the Spotlight and the Threat windows: the same settings and values as before, on one page you can open in combat. The threat windows' Threat window settings... opens it at Threat windows. Chat says once where they went.

  • Game Options › AddOns › PlateSmith › Threat (and each module's page there, such as QuestieDB) is now a short page saying where its settings are, with an Open in Studio button. QuestieDB's switches and status are in Studio › Settings › Modules › QuestieDB.

  • Refreshed looks for new profiles. Each look's enemy plates (Profile › New from preset and the first-run look cards) now match their card and are calmer: the name in a warm white, the level in gold (before the name, or where the look puts it), a slim cast bar without a border and with the spell's icon inside it, and what shows only in a fight (the elite and quest marks, auras, combo points) smaller. Bold's threat % sits unboxed under the bars and its marks are back beside the bar; Tank's threat lead is small and unboxed; Healer's enemy plates dim only while you target another mob; Compact's cast bar takes the cast colour. Names are 10 to 12 pt (most looks' were 14) and easy to read: Minimal's is 11 pt over a 100 x 8 bar, Compact's 11 pt inside a 100 x 12 bar with 11 pt cast text and 10 pt threat text, Sleek's and Healer's 10 pt. Blizzard's level box is exactly as tall as the health bar beside it and centred on it, on every plate type, as on Blizzard's own plates, with the enemy level 10 pt. Combo points show only while you have some (no empty row). The friendly plates follow: their names are the enemy name's size where the look shows full friendly plates (Healer 10 pt) and 1 pt larger where it shows names only (PlateSmith, Classic, Bold and Tank 13 pt, Minimal and Compact 12, Sleek 11), with the level in the look's gold (Friz Quadrata, as on its enemy plates) and the guild line at least 9 pt (Sleek's 10); Blizzard's keep Blizzard's 12 pt. Compact shows no level on friendly names either, and its friendly players' PvP and relationship icons sit beside the name instead of above the bar's corners. Blizzard's friendly players' bars take their class colour, as on Blizzard's own plates (the name stays white, but a PvP-flagged ally's name is Blizzard's green beside the faction icon; the bar keeps the class colour). Each look has an elite, rare and boss mark of its own (below). The looks' smaller aura rows leave room for their countdowns, so neighbouring times ("2m", "15m") never run together: a row of small icons has a wider gap, and the smallest (12 px buffs) a 7 pt countdown. Only profiles you make from a look from now on get them: your existing profiles, including ones made from a look, keep their look exactly.

  • Each look's own elite mark. A profile made from a look now marks elite, rare and boss enemies in a style that suits it (Studio › Elite / rare mark › Style): Classic the classic gold or silver dragon round the level at the bar's right end (its name sits a little higher, clear of the dragon); Sleek the level's suffix (60+, 60R, 60R+, ?? in red for a boss); Bold and Healer a gold or silver frame round the health bar (Bold's name, cast bar and raid mark sit a pixel or two further out, clear of it); Tank Blizzard's icon at its full 18 px left of the bar; PlateSmith, Minimal and Compact a small icon right before the name (Minimal now shows it, with its raid mark after the name); Blizzard keeps Blizzard's icons. Your existing profiles, including ones made from a look, keep their mark.

  • A PvP-flagged ally's colour goes on the health bar. With PvP icon › Display on Colour and icon (or Colour, until now "Name colour"), a flagged ally's full plate turned both the name and the health bar green. Now the bar takes the colour and the name keeps its own (its social or class colour), so a group or guild member still reads as one. Names-only plates, and full plates whose bar has a colour of its own (a Custom colour, a colour rule that always applies such as the Healer look's blend, or class colours with Colour social relationships off, as on the Blizzard look), colour the name instead. This applies to your existing profiles too. The swatch is now PvP colour, Studio's preview shows the same, and the Blizzard look uses it in place of its extra name rule (its white name rule now skips flagged allies).

  • Tank threat colours: Other tank has it is teal. Its pale blue was easy to mistake for Holding's periwinkle; new installs and new profiles (and every look) now use a teal. Your existing profiles keep their colours, which you can change in Threat colours.

  • A text box as tall as its bar. Style › Box behind › Height has a new choice, Match its parent: the box is as tall as the part the text is pinned to (the health bar beside a level, with its border), centred on the text, with Padding only at its sides; it never gets shorter than the text and Padding. Fit the text stays the default, so your profiles look as before. Blueprints that use it are !PSB4!.

  • A new rule starts as "low health turns red". + Add rule used to start with "tagged → grey", which plates already do on their own. It now starts as health.percent < 35 in red (or half see-through for parts without a colour); change the condition and colour to whatever you need.

  • Three slash commands. /ps help (and this page) lists /ps, /ps diagnose and /ps console; everything else is in Studio and Settings. The other commands still work. /ps quest on|off and /ps threat on|off are gone: they said "Updated" but changed nothing (use Studio › Settings › Show on plates).

  • Fewer rule presets. Rules › Presets no longer offers the two Threat colours presets, Cast colours by interrupt, Fade non-targets or Fade out of range: Threat colours, the cast bar's Colour by interrupt and Settings › Fading do those jobs (and Colour by interrupt keeps working where the game hides the answer). Rules you already made from them stay and keep working.

  • Importing a look keeps who draws your plates. A Blueprint import no longer changes Who draws the plates: that depends on the nameplate addons you have, not on the look (importing someone's "PlateSmith" beside Plater drew two sets of plates). Exports are unchanged.

  • Friendly plates in one place, per plate type. Studio's Plate settings on the Players and Friendly NPCs tabs now start with Friendly plates: Show as (Names only, Full plates or Blizzard plates), which each tab now chooses on its own; on Players, a line saying whether Hide unstyled names is on, which opens it in Settings › Names; Show in, the same switches as Settings › Where plates show; and a button to the Dungeons & raids design, which now has ‹ Back to World design at the top. Your profiles keep their one choice for both until you change one. Settings › Behaviour & display no longer has Friendly units; a button there opens the new section, and searching for it finds it. Hide unstyled names (no longer "outdoors" in its name) stays in Settings › Names, as it changes the game's own name settings for friendly players and their pets, guardians, minions and totems; its help now says what it hides, when, and that PlateSmith keeps it so even if another addon turns those names on. The preview's switch reads Editing: Names only | Full plate and follows Show as at once; its gold mark for the layout your plates use no longer disappears after Studio refreshes. Blizzard's own names-only box in the Dungeons & raids design is now Blizzard: names only in dungeons, so it is not mistaken for Show as. Blueprints carry each plate type's choice (!PSB4! only when Players and Friendly NPCs differ).

  • A tagged mob's health bar is grey, as on Blizzard's plates. A new health bar option, Grey when tagged by others (Studio › Health bar), turns an enemy's bar grey while another player or group has tagged it, so you can see at a glance that it gives you no credit. It wins over Threat colours; a colour rule on the health bar still wins over it. New profiles and every look have it on, with the TAGGED word turned off (it stays in the parts tree: its eye brings it back). Your profiles keep their TAGGED word and colours; the Health bar inspector offers Grey bar instead to switch. The Grey when tagged rule preset is no longer offered; rules you made from it keep working. Where the game hides whether a mob is tagged, the bar keeps its colour. Studio's Test values › Tagged shows the grey bar.

  • Cast bar icon inside the bar. Cast bar › Icon has a new choice, Inside: the spell's icon sits inside the bar's left end, as tall as the bar, with the spell's name after it, so nothing sticks out beside the bar. It works on names-only casts drawn inside their bar too (under a slim bar, it stays beside it). Blueprints that use it are !PSB4!.

  • Quieter placeholders in Studio. The dashed outlines for hidden parts (a cast bar while Casting is off, a turned-off Target of target) are faint grey at rest, light up when you point at or select them, and never cross a part that shows.

  • Stacking & distance is always editable. There is no Manage Blizzard's plate stacking box to tick first: every Blizzard setting on the page can be changed at any time. A setting you change is PlateSmith's from then on (marked, saved with your profile, and put back as it was when you log out, as before); the ones you leave alone stay the game's own and just show its current value, even when you change it in Blizzard's options while the page is open. The arrow beside a changed setting gives it back to the game. Reset Blizzard's stacking to game defaults stays, and now also gives every setting back. If you never ticked the old box, nothing changes: PlateSmith still sets none of these (values a profile kept while it was off are cleared, and Match frame size to layout and Stack only in combat are off, as they did nothing then). If you had it ticked, every setting you had stays applied. /ps diagnose says how many of Blizzard's settings PlateSmith sets.

  • View distance is shown but can't be changed. The game keeps nameplates to a fixed range (about 60 yards) and has ignored this setting for a long time, so PlateSmith no longer writes it (not from the slider, a preset or Reset); the row is dimmed and says why. A value your profile kept stays saved but unused.

  • Stack plates and Show offscreen plates. On WoW Forever, Blizzard's options stack enemy and friendly plates separately and can keep plates of units off the screen at its edge; Stacking & distance now has both (where the game has them) in place of the old note that one setting stacks both. Stack plates works like Blizzard's own Stack Nameplates: a dropdown that reads the units that stack ("Enemy Units, Friendly Units", one of them, or None) and opens a list where you tick Enemy Units and Friendly Units separately. Ticking one never changes the other, and the arrow beside the row gives both back to the game. The presets turn enemy stacking on there, and Stack only in combat stacks enemy plates. /ps diagnose also lists every nameplate setting the game has, with its value and default.

  • Developer commands are no longer in the download. /ps status, /ps perf, /ps testname, /ps console sample, /ps fetch and /ps playerprobe were test tools for PlateSmith's developers; typed now, each answers "That's a developer command (PlateSmith_Dev)." and does nothing. Everything a player needs is still under /ps, /ps diagnose and /ps console: the threat windows' sample data is Studio › Settings › Modules › Threat › Threat windows › Show sample data, and the live Performance tab is in /ps diagnose's window. /ps scale, still unlisted, now says what it changes: the Enemies' World design's scale only.

  • Automatic switching: scenarios and delves are open world. Settings › Profiles › Automatic switching used to switch to your Dungeons profile in a scenario or delve, while Studio's designs treat those places as open world, so that profile then drew its World design anyway. Both now read the place the same way: a scenario or delve uses your Open world rule (or keeps the profile you have). Your rules are unchanged and still apply in dungeons, raids, battlegrounds and arenas. The section also says when to use a design per place instead.

  • Clearer labels where two settings looked alike. The Threat page's palette section is now Threat text & window colours and says the colours on health bars and names are Studio's Threat colours; Studio's Colour-blind friendly says it changes Studio and the preview, never the plates. Warn when you lose a mob you tank moved from Show on plates into Threat colours, below Apply to, where it is unavailable (and says why) while Health bar edge gives the edge the threat colours. Friendly plates' Show as says Blizzard's plates still show and that Show in hides them; Quest icons says where the QuestieDB companion's options are; the combo points' Position says Placement is off while the row sits on the bar. Nothing you saved changes.

Fixed

  • Threat windows snapped together follow the damage meter together. Docking a window to Blizzard's damage meter (by dropping it there or from Follow damage meter), or the meter moving, took that window along but left the windows snapped to it behind, overlapping or hanging off. They now move with it, each keeping its own size and staying on the edge it shared, as when the group is dragged. A locked window stays put, and a group with a Rescue window holds still in combat and follows when combat ends.
  • Threat text on another addon's plates follows the fight. With Who draws the plates on Automatic beside another nameplate addon (or Blizzard, with PlateSmith extras), the threat text PlateSmith adds was written when the plate appeared and when your target changed, and could then stay as it was. It now updates as the fight goes, as on PlateSmith's own plates.
  • The PvP faction icon is full size. A PvP-flagged friendly player's Alliance, Horde or FFA icon drew the game's whole icon file, in which the emblem fills only a corner, so it showed as a small dot beside the bar or name. It now fills its box, about as tall as the name, on full and names-only plates and in Studio's preview. This applies to your existing profiles too.
  • Blizzard look: a PvP-flagged ally's name in Blizzard's green. New profiles promise a flagged ally's name in Blizzard's green beside the faction icon, but the Blizzard look drew it white. A profile made from the Blizzard look from now on colours it green (Colour and icon, its white name rule skipping flagged allies), on full and names-only plates, and the bar keeps the class colour. Your existing profiles keep their look: to get the green on one made from the Blizzard look, add a rule to Players › Name, pvp → colour green, below the white one (or make the profile again from the look). The other looks already show it.
  • Where plates show: Players works on WoW Forever. Its switch is named differently there (nameplateShowFriendlyPlayers), so unticking Players in a place did nothing. It now uses whichever switch the game has.
  • Friendly player plates can be clicked again. With the game's "friendly players: names only" option on, the game takes away a friendly player plate's click area, so PlateSmith's plates for friendly players (names only or full plates) could not be clicked to target them. Outside dungeons & raids, while PlateSmith draws friendly players, it now keeps that game option off (you see PlateSmith's plates either way; Clicking › Friendly players › Click through turns it on instead, above). Your own setting comes back when you show friendly players as Blizzard's plates, turn PlateSmith off or log out; in dungeons & raids, Dungeon friendly names only still decides. If you or another addon turn it on meanwhile, PlateSmith gives that back later and turns it off again. If the game closes without a logout (a crash), your own setting comes back at the next login instead of staying off, as long as you had logged out normally once since PlateSmith first changed it.
  • Settings given back during combat are not forgotten. Giving a Stacking & distance setting or one of the interact key settings (Objects & interacting) back to the game during combat, then setting it again before combat ended (switching profiles, Revert, turning PlateSmith off and on), could record PlateSmith's own value as yours, so logging out left PlateSmith's value instead of your own. Your value now waits with its record until combat ends.
  • No blocked-action warning from Escape in combat. With Blizzard's Options open over Studio (or a PlateSmith menu, the first-run setup or the Blueprint window's preview open), pressing a key in combat could raise "PlateSmith has been blocked from an action only available to the Blizzard UI". PlateSmith no longer tries to keep a key in combat. Opening Blizzard's Options also no longer moves other addons' windows in the list Escape closes.
  • Friendly NPCs say when the game hides their plates. With the game's own switch for friendly NPC plates off, the green names over NPCs are the game's floating names, which cannot be clicked. Studio › Friendly NPCs › Plate settings › Friendly plates now says so, with a button to Where plates show, which says where to turn them on.
  • Stacking & distance follows changes made outside PlateSmith. A setting PlateSmith doesn't set (Target scale, say) now shows the value you choose in Blizzard's options or another addon, and the open page updates by itself; PlateSmith never writes it. A setting it does set stays PlateSmith's, and chat says once that it was put back: the value you chose outside becomes the one PlateSmith gives back when you log out or click the row's arrow, instead of the older one it first found. Before, logging out could undo your newer choice. On another character (the game keeps settings like Target scale per character) PlateSmith no longer puts back a value it recorded on the last one. Values the game holds outside PlateSmith's slider ranges show as they are (WoW Forever's -100000 yd for Farthest opacity from read 0 yd), and the preview's other plates no longer go invisible where Non-target opacity is -1 ("not used").
  • Styled text keeps its colour. A part with its own font or outline (Style › Font, as several looks give the name and guild line) could lose its colour and draw white: on your plates the guild line and the grey TAGGED word, and in Studio's preview a friendly name (green, or its class colour) and guild line. Setting the font took the font's own white with it; the text now keeps its colour. This applies to your existing profiles too.
  • Switching profile by dual spec works on WoW Forever. Settings › Profiles › Automatic switching said "This client has no specializations to switch by". It now offers Primary talents and Secondary talents, even before you learn dual spec, so you can set them up ahead.
  • Plates appear faster right after logging in. After a login, a /reload or a loading screen, names could wait several seconds (up to 8 in a busy city) before PlateSmith drew them, while the game ran slowly. For the first seconds PlateSmith now spends more of those slow frames drawing them, so the first wave shows within a second; spare plates are made straight away afterwards (extra ones for a crowd in cities and instances). Once the game runs normally the usual limits that stop hitches in cities apply again. /ps diagnose shows the wait (addQueue.loginBurst).
  • Less memory in quiet zones and when changing profiles. In a quiet zone PlateSmith kept spare plates for a crowd that was not there and made garbage for the game to clean up (about 2 MB a minute with no plate in view). It now makes the extra spare plates only in cities and instances, or when a crowd arrives (in the open world it makes the usual number); its every-frame plate updates rest while no plate is in view and nothing waits to be drawn, instead of running every frame with nothing to do; it no longer reads the quest log for quest marks while no plate is showing (with the QuestieDB companion, every quest's objectives on every quest log change); and a mob coming back into view, or the mouse passing over one, no longer reads its tooltip and quests again until your quest log changes. Plates, quest marks and spares look and behave as before. /ps diagnose now shows PlateSmith's memory before and after a full clean-up (performance.memory.retained: what it keeps and what was waiting to be cleaned up), an estimate of what its plates hold (performance.spares), and which part of the plates' every-frame work made garbage (performance.memory.frameSteps). Making a profile from a preset (Profile › New from preset) made about 5 MB of garbage each time with Studio open; it now makes about half, as it loads and draws the new look once instead of the defaults first and Studio redraws once instead of up to three times. Switching profiles makes about half what it did, deleting one almost none, and making, loading and deleting profiles again and again no longer adds to what PlateSmith keeps. Editing in Blueprint Studio made the most garbage of all: every change redrew all of Studio, about 0.7 MB each time, including Settings pages and parts' rows you could not see. A change now makes a small fraction of that (about a twentieth), as Studio keeps what did not change and refreshes a Settings page or a part's rows when you open them; picking a part, changing the plate type tab and Revert (now one redraw, not two) make far less too. Your profiles, Studio and the plates look and behave as before. /ps diagnose names these actions too (performance.memory.actions: New from preset, switch, Save, Revert, Delete, Studio's redraw and opening).
  • Less memory churn. PlateSmith made less garbage for the game to clean up: plates no longer make new tables when a cast bar or aura row comes and goes in combat (about 1.2 MB a minute with a dozen casters), and quest marks read each kind of quest mob's tooltip and each quest's objectives once per refresh instead of once per plate. /ps diagnose lists what allocates most (performance.memory).
  • Blizzard's name over a PlateSmith plate. When the game gave a nameplate to a new unit before telling PlateSmith the old one had gone, the late notice could take the new unit's plate down and leave Blizzard's own large name showing until the unit left view. /ps diagnose now counts the nameplates PlateSmith draws against the game's, and any showing Blizzard's plate (context.ownership).
  • Big Blizzard names over friendly players in cities. With Hide unstyled names on, the game's large floating names could still show over friendly players in a crowd: the game makes at most 40 nameplates, and writes its own name over everyone past them when its friendly player names are on. PlateSmith turned those names off only at login and loading screens, so anything that turned them back on later (another addon's city preset, such as Hyperframe's, or the game's Names options) won until the next loading screen. They now stay off while the option is on, outside dungeons & raids; what turned them on gets its choice back when you turn the option off or log out. Players past the 40 then show no name. The option's help says what it does.
  • /ps diagnose ownership counts. context.ownership showed none of the game's nameplates as drawn by PlateSmith (owned and shouldDraw 0) while it drew them all, because the game hides which unit a nameplate belongs to; it now matches each nameplate to the plate PlateSmith drew on it. It also shows whether Hide unstyled names is being kept (worldNames.watch).
  • /ps diagnose "script ran too long". With Keep history on and several saved captures, opening the report could stop with this error; the saved captures are now counted once instead of on every refresh.
  • /ps diagnose full report scrolls. The Report tab (Show full report) opened with the whole report selected and the keyboard in it, and the mouse wheel could not move it far. It now opens at the top with nothing selected and the keyboard free; the wheel scrolls it from anywhere over the text, as does the scroll bar. Select all selects it for Ctrl+C. The Summary still opens selected, and Copy full report still selects the one-line code.
  • Closing Blizzard's Options keeps PlateSmith open. Closing the game's Options (its Close button, the x or Escape) also closed Blueprint Studio and any other PlateSmith window. They now stay as they were. While the Options window is open, Escape closes the PlateSmith window over it first, then Options. Studio's search and Profile › Switch automatically..., which open a setting in Blizzard's Options, step Studio aside without asking about unsaved changes and bring it back when you close Options.
  • Threat rules without Colour by threat. On mobs whose threat the game hides (in dungeons and raids), a colour rule on threat (threat.holding, tanking, threat.other, threat.offtank, and rules from the old Threat colours (tank) and (DPS/healer) presets) did not apply; with Colour by threat on, Threat colours painted the bar instead, so the rule only seemed to need that box. The game now picks the rule's colour from its hidden answers, as it does for Threat colours, with the box on or off, and a rule's colour still wins over Threat colours. threat.losing and threat.pulling stay unknown there.
  • Threat colours for a raid tank. In a raid, a mob that was targeting you while the game hid its threat could read as held by someone else (a tank saw Another tank has it), because your raid slot was not recognised as you. It now is; when the game will not say who you are, nothing is guessed.
  • Target highlight Off means off. With Plate settings › Target highlight › Off, your target's health bar no longer gets PlateSmith's gold edge either (a threat-coloured edge still shows). Profiles you already have keep the gold edge they had with Off; Target highlight then says so and offers No gold edge.
  • Tank warning follows the profile's role. "Warn when you lose a mob you tank" now uses the same role as Threat colours. Only an older profile or Blueprint that always colours as DPS (Threat colours shows "This profile always colours as: DPS & healer") notices: it no longer gets the tank's red edge. Follow my role puts it back.
  • No empty boxes. A text part with Show a box (the Tank look's threat lead before 1.3.0, a boxed threat text or level) drew a small hollow square beside the health bar while it had nothing to say, such as out of combat. The box now shows only while its text does.
  • Neutral mobs are in the Tank window. A yellow mob you can attack (a Snapjaw, a quest mob) was left out of the Tank window until it was in combat, while red ones were listed idle. It is now listed the same way: IDLE until the fight, below the mobs you are fighting. Critters and pets are still left out, and so are friendly units and objects. Targeting it, the Threat meter measures it, and in combat its plate colours by threat and shows threat text as a red mob's does.
  • Studio's preview colours as the plates do. The preview worked out rules and colours with its own copy of the plates' logic, and they had drifted: an enemy's bar and name were a different red, a friendly NPC's bar a different blue, your own sample ignored the group colour you set, and a rule whose condition is only spaces applied on the plates but not in the preview. Test values and Preview as if every condition is true now use the plates' own rule evaluator and base colours, so for the same facts the preview shows what a plate shows. The friendly player sample is you, in your group and PvP-flagged, so its PvP colour goes on the bar or the name as on a plate, and rules on pvp and ingroup hold for it. A part a rule hides still shows faintly in the preview, so you can select it.

1.2.0

A big feature update: a design for each kind of place, an Enemy players tab, Where plates show, a soft target glow, combo point styles, threat colours without rules and Blueprint chat links. Your profiles carry over and look the same as before; the Enemies' old Dungeon layout is now their Dungeons & raids design, unchanged.

Going back to 1.1.1 keeps your designs, Enemy players, Where plates show and threat colour settings for when you update again, but 1.1.1 draws every place with your World look. A few new looks are lost for good there: the soft glow becomes the gold edge, the new combo point and text box styles and the Blizzard modern bar texture go back to 1.1.1's, and Studio's colour-blind Off goes back to following your plates.

Blueprints that use nothing new start !PSB3! and still import into 1.1.1; ones that use a 1.2.0 feature start !PSB4! and need 1.2.0.

New

  • A design for each kind of place. Studio's Design: menu, under the plate tabs, starts at World; + Add separate design gives a plate type its own look for Dungeons & raids (Enemies), Battlegrounds & arenas or Cities & inns (Cities & inns can start Light: no buffs, debuffs or casts under names). Plates switch design as you enter and leave each place.
  • Designs follow World. A design keeps World's look except what you change in it. A gold diamond marks each setting and part a design changes; point at it for World's value or Reset to World. The chip beside the menu says what the design follows (Follows World · 3 changes). Your old Dungeon layout arrives as a Full copy; its chip offers Follow World where they match....
  • Enemy players. Studio has a fourth tab. Hostile players use your Enemies plates until you press Customise for enemy players; from then on they follow the Enemies everywhere except what you change on that tab. Where the game hides whether a unit is a player, its plate is drawn as an NPC.
  • Where plates show. Studio › Settings › Behaviour & display › Where plates show has a box for each plate type in each kind of place: untick Enemies in Cities & inns and enemy plates hide in town. It uses Blizzard's own show/hide switches (so in dungeons it covers Blizzard's friendly plates too), waits for combat to end, and puts the switches back when you log out. Blueprints leave it out.
  • Soft glow behind. Your target can have a soft cyan cloud of light behind its plate: Studio › Plate settings › Target highlight › Highlight › Soft glow behind. It wraps the health bar and any name, power bar or cast bar within 12 px of it, is as wide as a long name, and on names-only plates sits behind the name line and guild. Choose its colour (custom, class, reaction or Threat: your threat colour on that target in combat), size, opacity, offset and Pulse slowly.
  • A target highlight for each plate type. Enemies, Players, Friendly NPCs and Enemy players (and each of their designs) can each have their own highlight; Copy to all plate types shares one. Until you change one, every type keeps the look you have now.
  • Combo point styles. The Combo points part's Style has a Shape (blocks, round coins, squares, diamonds, bar segments or Blizzard's art), a Position (where placed, on the health bar's bottom edge, or above or below the bar), Class colour, a Glow, Fit to bar width and Show row (Always, In combat or with points, Only with points). Existing profiles keep their blocks.
  • Combo points on new profiles. Gold round coins sit under your target's cast bar and move up under the health bar while nothing is cast; each look preset has its own style. Studio's Test values have a Combo points slider.
  • Colour by threat. Studio › Settings › Behaviour & display › Threat colours colours an engaged enemy's health bar and name (and, if you like, its edge) by who holds it, in tank colours (Holding, Losing it, Other tank has it, Someone else has it) or DPS and healer colours (Safe, Pulling, Aggro), with no rules needed. It is on for new profiles and off for existing ones; a colour rule on a part still wins.
  • Blueprint chat links. Export's Link in chat puts [PlateSmith: <profile> #<id>] in your chat box. Other PlateSmith 1.2.0 players click it to open their Import with your Blueprint filled in; nothing applies by itself. A link lasts an hour while you're online, and links pause while the game restricts addon messages (instance combat, encounters, keystones, PvP matches). /ps fetch <Name-Realm> <id> asks for one by hand.
  • Review a Blueprint before importing. Import has Paste and Review tabs. Review shows the sections beside a small Studio stage with each design the import would change and what changes; Yours now compares with your plates. Nothing changes until Import selected (then Save).
  • Blueprints from newer versions import. Settings a later PlateSmith adds are skipped instead of refusing the whole Blueprint, and chat names them.
  • First-run setup. On a new install, Studio first asks how you play this character (Tank, Healer, DPS or Hybrid), which sets This character tanks and turns Colour by threat on, then offers the nine looks with a sketch of each. Skip or Escape at either step; it shows once.
  • A Blizzard look. New from preset has Blizzard: Blizzard's modern plates, drawn by PlateSmith so you can change anything. It brings two choices for any design: the Blizzard modern bar texture and a Rounded box behind text.
  • Studio extras. View › Sample name shows the preview's name in Chinese, Korean or Russian, and View › Model puts you, your target or a creature behind the preview plate. /ps testname <text> shows text as your target's name. Names-only casts can show their text Inside the bar (Settings › Behaviour & display › Names › Name cast text).

Changed

  • Plate settings. The parts tree's top row is now Plate settings. Its Target highlight section holds what was Settings › Behaviour & display › Target: "Selected target" is now Highlight, with Off, Gold edge (steady or pulsing) and Soft glow behind. Your choice is kept.
  • PvP-flagged allies in Blizzard's green. New profiles show a flagged ally's name in Blizzard's green as well as the faction icon. Studio › Players › PvP icon has a Name colour and a Blizzard green button; existing profiles keep their colour.
  • Export is share-code only, with Link in chat. Import still reads Blueprint JSON.
  • Studio's Layout switch is gone. The Design menu replaces it; Blizzard's dungeon names are Players' and Friendly NPCs' Dungeons & raids (Blizzard) design.
  • Smoother sliders. Dragging a Studio slider no longer redraws every plate at each step: your plates catch up a few times a second and in full when you let go, while the preview follows at once.
  • More room for the preview. One row holds the design, its chip, the eye and View; Plain dark background is in View and Test values sits on the preview's foot, in plain words (Tagged, You tank...).
  • Placeholders for hidden parts. Studio's faint placeholders for hidden parts (a cast bar while Casting is off, a hidden combo row) are now dashed outlines behind the plate instead of overlapping it.
  • Clearer names. Who draws the plates (Automatic, PlateSmith, or Blizzard, with PlateSmith extras), Placement's Stick to, + Add › Custom part, and the Dungeon look is now Compact.
  • One tank choice. Threat colours use This character tanks (Settings › Threat). The two threat rule presets moved under Rules › Presets › Advanced.
  • Studio's colour-blind friendly follows your plates' colour-blind palette unless you pick On or Off.

Fixed

  • A druid in Cat Form is no longer coloured as a tank. With This character tanks on Adaptive, Cat Form, caster form, Moonkin and Tree of Life now always count as not tanking, even with a specialization the game calls a tank, and they replace an earlier Bear Form at once: in a group that lists you as DPS you get the DPS & healer colours. Bear Form still makes you the tank even when the group finder lists you as DPS or Healer, and a group Tank role still counts first; warriors and paladins still go by Defensive Stance and Righteous Fury. Always and Never still win over everything.

  • See whom threat colours colour you as. Studio's Threat colours and Settings › Threat › Your role now say "Colouring as: Tank (Bear Form)", "DPS (Cat Form)", "DPS (group role)" and so on, with a small legend of what each of that role's colours means (tank: holding, losing it, another tank has it, someone else has it; DPS & healer: safe, pulling, aggro). A threat window's title tooltip says the same, and each row's tooltip adds the legend. /ps diagnose reports the role's reason and the same line.

  • Adaptive tank role in group-finder groups. A bear tank given a DPS or Healer role by the group finder saw the mobs it held as LOOSE. What you're doing now (bear form, a tanking stance, Righteous Fury) now counts before that role, and shifting in or out of bear in combat changes it at once; a group Tank role still counts first.

  • Threat colours on every plate. A mob you held but weren't targeting could lose its threat colour while its text showed 100%. Plates now read the game's own threat state for each mob, as the threat text does.

  • Enemy buffs in combat. When the game hides an enemy's buffs from addons, the Buffs row now shows them through the game's own aura display, as Debuffs already did.

  • Aura countdowns count like the game's own aura timers (28, not 29) and switch to minutes at 60 seconds.

  • Combo points after Cat Form. Combo points stay on your target when a druid leaves cat form; only the filled points show out of cat form.

  • Combo points on the bar's edge no longer hide under the cast bar.

  • Studio's scroll bars follow the pointer when dragged on every game build, and a click on the track moves a page.

  • Busy cities. New plates are built over two frames, spare plates are made ahead in quiet moments, and entering a city restyles only the plates whose design changes, so flying into a capital hitches far less. Blizzard's own plate no longer flashes up first with a large name.

  • Studio in busy places. Studio's first open after logging in could stop with "script ran too long"; it now builds less up front.

  • Lua errors on target changes when the game hides a plate's size from addons.

  • Chinese, Korean and Russian names show properly with a chosen font.

  • Hostile players who aren't PvP-flagged get PlateSmith plates when the game hides whether they're friendly.

  • Smaller fixes: the preview's grid, outlines and snap guides are sharp at any zoom; Targeted by's Initials can be turned back on; the names-only cast icon sits level with its bar; Where plates show's headers no longer break inside a word; and a failed Blueprint import can no longer put colours or links into chat.

1.1.1

Your profiles and Blueprints carry over and look the same as before.

New

  • Display: one place for every text's look. Every part that draws text has a Display section in Blueprint Studio: first what it shows, then always Font, Font size, Font style and Shadow. Style now holds only looks (the box behind text, bar textures, pips and badges).
    • Font size is in points. Left on Auto, a text keeps today's size; move the slider to set your own, tick Auto to go back.
    • Cast bar text, quest progress, the combo count, Targeted by initials and buff/debuff countdowns now take a font, size and style too.
  • Bigger, tidier countdowns on buffs and debuffs. Select Buffs or Debuffs and change Display › Font size. Countdowns now sit centred on the icon so "15m" and "2m" line up; Text position offers Bottom centre, Centre, Top centre or the old corner. Studio's preview shows sample countdowns.
  • Hide permanent auras. A buff or debuff row's Display › Permanent hides auras without a time limit (passives, Devotion Aura, Find Herbs), so the row shows what will run out. Off by default. In dungeons, where the game keeps aura times private, every aura still shows.
  • Dungeon friendlies in Studio. In dungeons Blizzard draws friendly plates itself. Studio's Dungeon layout now shows just that: on Players and Friendly NPCs, one part, Name (drawn by Blizzard), with everything the game allows (change Blizzard's names, where, names only, class colours, font, size and style) and a preview of the name.
    • The Settings › Dungeon friendlies page is gone. Its options are in that Studio view, Readable Blizzard names outdoors is in Behaviour & display › Names, and Test editable overlay is in Settings › Experimental. Search finds each in its new place.
    • The overlay test never drew (the game blocks it), so it is turned off once on updating; a chat line says so if it was on. Turn it back on under Experimental to try it.

Fixed

  • Studio opening invisible after a reload, mostly in dungeons or combat. Studio now builds each part and Settings page when you first open it, so it opens quickly; if it ever fails, it closes and says to /reload.
  • Dungeon friendly names at different sizes, or resetting in combat. Blizzard name size now applies to every name, straight after each plate appears, and keeps the game's own font flags.
  • Countdowns in dungeons keep your font, size and position on new auras.
  • Error floods: "Box behind" text in Orgrimmar and dungeons ("attempt to perform arithmetic on local 'width'"), and "blocked by secret aspects" from aura countdowns in dungeons.
  • /ps diagnose no longer lists a known, harmless lookup the game refuses as a problem.

1.1.0

A feature update. Profiles from 1.0.3 carry over; nothing needs setting up again.

New

Blueprint Studio

  • Quick layout: select the tree's Plate row and pick what goes at the Top, Bottom, Left, Right or Centre of the health bar (or the name on names-only plates). Picks are ordinary placement, so everything stays editable.
  • Search settings: find any setting by name, help text or page, with results shown right in the page so you can change them there. Matches on Blizzard's Settings pages and Studio parts are listed under Elsewhere.
  • Text size: one slider (80% to 150%) scales every PlateSmith text on every plate type.
  • Each rule has an on/off box, so you can turn a rule off without deleting it.
  • The footer shows PlateSmith's own CPU time per frame; click it for the Performance view.

Plates

  • Combo points on your target's plate (rogue, or druid in cat form), on by default for enemy plates. Style the pips in Studio; custom text can show {combo}.
  • Quest progress beside the quest mark, such as 3/8 or 38% (select the Quest marker: Progress). Custom text: {quest.progress}, {quest.percent}.
  • Fade non-targets and Fade out of range (Settings › Behaviour & display › Fading), each with its own opacity. Both are ordinary rules you can adjust per part, and Rules presets too. New rule conditions: hastarget, inrange.
  • Colour by interrupt (Cast bar): one colour when you can interrupt and your interrupt is ready, one when it is on cooldown or you have none, one when the cast cannot be interrupted. Also as the interruptReady condition and a rule preset.
  • Draw casts above other plates (Cast bar, off by default) so a casting plate is not hidden behind its neighbours.
  • Casts on names-only plates (Settings › Behaviour & display › Names, off by default): a slim cast bar under a friendly name, so you see "Opening", "Mounting" or Hearthstone. There is an enemy option too, for enemy layouts with no health or cast bar.
  • Targeted by badges (+ Add › Icons, off by default): a small class-coloured badge for each party member targeting an enemy (in a raid, its tanks). Hidden where the game will not say.
  • The focus's plate can be drawn on top, like your target's.
  • Opt-in Blizzard name size for friendly names in dungeons (Settings › Dungeon friendlies): one size, outline and font for the names Blizzard draws on its own plates, which addons cannot style. It changes Blizzard's shared nameplate fonts; turning it off restores them exactly.

Stacking & distance (new Settings page)

  • PlateSmith can manage Blizzard's plate stacking: overlap or stack, spacing, movement speed, screen edges, keeping your target on screen, view distance, scale and fade with distance. Tight, Normal and Loose presets, a live preview, and optional combat-only stacking. Off until you turn it on; turning it off puts every setting back.
  • Plates can be sized to what your layout draws, so stacked plates sit evenly apart.
  • Reset Blizzard's stacking to game defaults, and Restore Blizzard nameplate settings for the friendly-name settings PlateSmith changes.

Profiles

  • Automatic switching (Settings › PlateSmith › Profiles): pick a profile per character for the open world, dungeons, raids, battlegrounds and arenas, and per specialization where your client has them. It waits for combat to end and for unsaved changes, and says in chat why it switched.

Threat

  • Threat text on plates reads 100% +145: your threat % and the signed gap the threat windows show. Where the game keeps the numbers private only the % shows. Threat text in the Threat part also offers % only or Detailed; custom text gains {threat.leadpercent}.
  • The last gap read through your target, hover, focus or a boss stays on the plate marked ~. Keep last gap for (5 s to until the mob is gone), Stale gap (dim, fade with age or grey) and Show gap age ("~+145 3s") set how.
  • Boss units are used for threat in encounters, so a boss's plate can get its full gap even when it is not your target.
  • Threat windows: Detach from group in the right-click menu; Shift-drag skips snapping; the window or meter you are about to snap to glows; Target first keeps your target as the Tank window's first row.
  • A new Experimental page in Settings: soft-target and target-of-target threat reads, a solo hover gap, and an outside-group holder row. All off by default; these test what the game allows, and /ps diagnose reports whether each one worked.

Performance

  • /ps perf opens a live Performance view: the client profiler's figures for PlateSmith, plate adds by phase, the busiest events and every ticker entry, with Reset peaks.
  • /ps diagnose warns when the slow taintLog or scriptProfile client settings are on.

Changed

  • Smoother plates: new plates appear with much less of a hitch (camera turns in cities, pull starts, dungeons). Plates build only the parts their layout uses, a few are prepared ahead out of combat, setup is spread over frames, and target changes touch only the two plates involved.
  • Threat windows redraw only what changed, and the Performance tab costs little to keep open.
  • Larger text on new profiles (14 pt names, 11 pt custom text). Existing profiles keep their sizes.
  • Settings pages are tidier: help moved into tooltips (point at a setting or its ?), check boxes line up like Blizzard's Settings, and sections are evenly spaced.
  • Show on plates ticks now match Studio's eyes, and the tank's red health-bar edge has its own box, Warn when you lose a mob you tank.
  • Threat windows snap from a little further away (12 px).
  • Tank window: Possible attackers and LIKELY say plainly that attackers are inferred; what the game hides shows as unknown (?) rather than 0.

Fixed

  • Threat in dungeons:
    • Mobs you hold no longer show LOOSE.
    • Mob names show instead of "nameplate5".
    • LOSING shows when someone is about to pull a mob you hold.
    • Fleeing, feared or stunned mobs keep their holder.
    • Critters and neutral mobs outside the fight no longer fill the Tank window.
  • The threat gap no longer vanishes the moment you change target.
  • A group member's unnamed pet shows as "<owner>'s pet" instead of "Unknown".
  • Quest marks: a mob that still drops an item you need shows the loot bag once its kill objective is done, and quest progress shows in dungeons through your target or mouseover.
  • Friendly names in dungeons no longer show at two sizes at once.
  • Updating from 1.0.3 with threat details off keeps threat parts hidden and turns threat-reading rules off (a chat line says which profiles; tick the rule's box to turn it back on).
  • The other-addon notice's Disable and reload works again and offers a Reload now button.
  • If PlateSmith's saved file is lost while it manages Blizzard settings, turning the option off now restores Blizzard's defaults.
  • Settings: section lines no longer vanish when scrolled to the end, section titles survive switching pages, and every page opens at its top.
  • Rules using tanking, elite, rare, boss, hostile or neutral no longer apply when the game hides that information.

1.0.3

Fixed

  • Without QuestieDB installed, the optional PlateSmith QuestieDB companion no longer reports "failure to load: missing"; it now stays quietly off until QuestieDB is there.

New

  • When another nameplate addon is running, PlateSmith says so once per session in a small window (never in combat or during a loading screen). It explains that PlateSmith is running as a light overlay (quest markers and threat) on that addon's plates, and offers Keep overlay, Disable <addon> and reload (asks first), and Don't show again for that set of addons. With two or more nameplate addons running it warns that they overlap each other.
  • PlateSmith now also recognises NeatPlates, Platynator, nPlates, and ElvUI or Tukui while their nameplates are on, and draws only its overlay on their plates in mode auto.
  • /ps diagnose flags two or more nameplate addons running at once as a problem, and notes when PlateSmith is running as an overlay on another addon's plates. It also lists PlateSmith's modules and the add-ons they rely on, so it says why QuestieDB markers are off (disabled or not installed).
  • Your target's plate now draws on top where plates overlap, so its name and bars are never hidden under a neighbour's.
  • Blueprint Studio's Settings pages are laid out like the rest of PlateSmith's settings: folding sections in two columns when Studio is wide enough (one when it is narrow), each row a label, its control and its help underneath. Section folds are remembered.
  • Behaviour & display is grouped into Plates, Names, Target, Text, Quests and Show on plates. The font field is as wide as the column and shows a long font name in full on hover.
  • Show on plates (quest markers, tagged indicator, threat details, elite and rare marks) and the tree's eyes stay in step: unticking one shows its part's eye off, and showing the part by its eye ticks it again. While a switch is off, that part's inspector says so, with a Turn on link, and its controls are dimmed until it is back on.
  • Aura defaults, Relationships, Studio and Help use the same sections; Help's text wraps to its column.

1.0.2

Changed

  • The AddOns list shows PlateSmith as "PlateSmith Nameplates", in the Unit Frames category.
  • /ps diagnose matches the Settings pages: proper tabs, the title and history buttons on one line, and even spacing. Details now shows the report in folding sections (Context, Profile, Performance, Target, Auras, Threat, Threat windows, Quest, Restrictions, Other) as name and value rows, with problem values in red at the top of their section and counted on a folded section's header. Ticker entries and events show as small tables sorted by cost. The fold state is saved.
  • Resizing a threat window now moves the windows stacked below it (and below its row) down or up with its bottom edge, and the windows snapped to its right (and its column's right) with its right edge, so they stay attached. They stop at the screen edge. Hold Shift as you start to resize one window alone, without moving the others.
  • A threat window's title has a tooltip: drag to move it with the windows snapped to it, Shift to move it alone (it still snaps), right-click for its menu.
  • Blueprint Studio's + Add rule and + stop buttons, when unavailable, now look disabled like Studio's other buttons instead of being dimmed twice.

Fixed

  • The threat window resize grip no longer shows its tooltip while you resize (or just after); it shows only when you hover over the grip.

Performance

  • Threat tracking does less work in groups and raids: a group change is handled once instead of once per event, changing target re-reads only the old and new target, and stance or aura changes no longer re-check your role when it is fixed (Always, Never, or assigned by the group).
  • With the threat setting off and no threat window shown, threat tracking now sleeps and catches up when it is needed again. Out of combat with nothing changing it checks four times less often.
  • Threat windows redraw only when something they show changed.
  • Save and Revert bars that are not on screen no longer update on every edit, and the unsaved-changes check runs once per update instead of once per bar.
  • The QuestieDB companion rebuilds its quest markers only when your quests or objectives actually changed, and remembers each plate's creature so it is not worked out again on every check.
  • Protected-value checks, which run for nearly everything PlateSmith reads, are cheaper.
  • In raids and groups, health, power, cast, name and aura updates for group members and other units without a nameplate are ignored straight away instead of reaching the plates.
  • Nameplates redraw only what an update changes: a health change redraws only the parts that show health (text, bars, templates and rules that use it), and nothing at all on plates that show none. In instances where health is protected, the regular health check no longer redraws every plate.
  • A delayed or pushed-back cast only moves its cast bar; a hidden power bar no longer reads power; a mob changing target redraws its plate only when you show its target's name or use it.
  • Threat text on plates is rewritten only when the threat reading changes.
  • Aura rows check your target only on your target's plate; an aura read the game refuses in combat is not retried on every update (it is tried again after combat); Blizzard's aura fallback is only moved or rescaled when it needs to be.
  • Withheld raid markers: a group member's retarget checks only that member's target, and focus and mouseover changes look up markers at most four times a second.
  • The target halo and spotlight animation runs only while one is showing; the native-plate backstop runs every 2 seconds; whether you are in a dungeon or raid is checked once per zone.

1.0.1

Changed

  • The threat window resize grip has a tooltip explaining snapping and Shift.
  • /ps diagnose opens on a short summary; Copy full report gives one PS1 code line. For a bug report, paste the summary and that line. The full readable report is still under Show full report, and every flagged value under Details.

Fixed

  • Switching profiles in Blueprint Studio no longer shows an error.
  • A profile's fonts now apply when you switch to it: plate names no longer keep the look of the profile or preset you used before (such as Bold's Morpheus or Classic's thin text).
  • Blueprint Studio now follows a profile switch made anywhere (Settings, a slash command, New from preset), so its preview always shows the profile your plates use.
  • Threat windows snapped side by side now line up at the top and share one height, and a window snapped above or below another takes its width. Resizing one from its corner resizes the others in its row (height) or column (width), and its edges now snap to neighbours and the screen edge while you drag, with the highlight showing. Hold Shift to resize one window freely.
  • /ps diagnose: every tab's scroll bar now follows the text (its thumb shows how much is visible and can be dragged), hides when the text fits, and the view ends at the last line instead of scrolling on into empty space.
  • /ps diagnose summary: only errors from this session are listed as problems (older ones stay in History with their build and time, and each History row has its own dismiss button); error text drops the addon path and is cut cleanly; Studio is named only when it edits another profile; and the top event reads like "plate added ×12, 170.8 ms total (peak 25.4 ms)". Clear history now sits next to Keep history.

1.0.0

PlateSmith's first full release. Design your own nameplates in Blueprint Studio, see who has threat at a glance, and share your setup with a single code. Everything from the alpha builds is here, rebuilt and reviewed for release.

Blueprint Studio

Type /ps to open it. Pick a plate type (Enemies, Players or Friendly NPCs), click a part, and change it. Changes show on the preview straight away and reach your plates when you press Save.

  • Every part is yours to place. Drag parts on the preview (they snap to the plate and to each other; hold Shift to place freely), nudge them with the arrows, resize them with the handles, and rearrange them in the tree. Rename, duplicate, reset, delete or add back any part.
  • Anchor to and Pin. A part moves with the part it is anchored to. Pin it to an edge and it follows that part's size: the level stays beside the name however long the name is. Turn a part off and whatever is pinned to it takes its place.
  • Stacks. Parts in a stack close up when one has nothing to show, so an idle cast bar leaves no gap.
  • Custom parts. Up to 24 per plate type: health, power and threat numbers, your own text with tokens and conditions ({health} / {health.max}, [if health.percent < 35]LOW[end]), or a bar, box or icon.
  • Style any text or bar: font, outline, shadow, a box behind text, bar texture, background and border. Save a look as a preset and use it on other parts.
  • Rules change a part when something is true: set its colour, blend it by health, fade it or hide it. Ready-made presets cover health colours, execute range, grey when tagged, and threat colours for tanks and for DPS and healers.
  • Test values let you preview a rule or custom text as it would look on a low-health, elite, casting or tanked mob.
  • Preset profiles get you started: PlateSmith, Classic, Sleek, Bold, Tank, Healer, Minimal and Dungeon, each with a look of its own. Each makes a new profile you can edit, and never changes the ones you have.
  • A clear inspector for every part, with sections you can fold away, and Colour-blind friendly and High contrast options.

Nameplates

  • New default layouts for every plate type, based on Blizzard's plates and the most popular nameplate addons, and tested so nothing overlaps.
  • Cast bar with the spell's icon, its name and the time left, counting down for channels too.
  • Aura rows you can shape: how many icons, per line, size, spacing and direction, with a cooldown swipe and optional time left.
  • Friendly plates as names only or a full plate, each with its own layout. Dungeons have their own positions too.
  • Target of target name, quest icons (PlateSmith's or Questie's, never both), a loot bag on mobs that drop a quest item (with the QuestieDB companion), elite and rare marks as icons, words or letters, raid marks and TAGGED.
  • The power bar only shows on units that have power.
  • The target is highlighted with a fitted outline and chevrons.

Threat

  • Threat on your plates: your threat %, the gap to the next player (+125 means you are safely ahead), and raw threat, coloured by state: you hold it, you are losing it, you are about to pull it, or someone else has it. Works on every mob you are fighting, not only your target.
  • Threat windows: up to five meter-style windows, each a Threat meter (your group's threat on your target) or a Tank list (every enemy and who holds it). Eight themes. They snap together, move as a group, and resize; a highlight shows where one will join.
  • Follow Blizzard's damage meter: drag a window onto any side of it (or pick a side in the menu) and it stays attached. Windows line up one after another, and stay put when the meter is hidden.
  • Sample data for the threat windows (Settings, the window menu, or /ps console sample): a made-up group and enemy list in your theme, for screenshots out of combat. Turns off in combat.
  • Click a row to spotlight that mob's plate: a glow round its health bar, an arrow over its name, chevrons or a box, and the other plates dim.
  • Your tank role per character: Adaptive (group role, then bear form, stances and similar, then your spec), Always or Never.

Profiles and sharing

  • Named profiles, one per character, with Save and Revert. Create, duplicate, rename and delete them from Studio or Settings.
  • Blueprints: export a whole profile as a !PSB3! share code and import someone else's. Import checks everything first and lets you choose which parts to replace. Alpha !PSB2! codes still import.

Settings

  • Settings > AddOns > PlateSmith holds Threat (your role, colours, threat windows and the spotlight, in sections you can fold) and Profiles. Everything else lives in Studio.
  • /ps opens Studio, /ps config opens Settings, /ps console shows or hides the threat windows, and /ps diagnose opens a report you can copy into a bug report.

Performance

  • Each plate redraws at most once a frame, and health, power, auras and threat only update the parts that use them. Busy pulls cost a fraction of what the alpha did.
  • Cities and crowds stay smooth: friendly plates update only when something about the player changes (name, level, faction, PvP flag, group, guild or friends), aura rows read a unit's auras at most once a frame and nothing while a row is hidden, and a burst of new plates (logging in, zoning, a crowd coming round a corner) is spread over a few frames.
  • Aura countdowns are drawn by the game's own cooldown frames, so they cost nothing to run.
  • /ps diagnose shows each timer's cost over the last 30 seconds and the five costliest game events, for bug reports.

Coming from the alpha

  • Names-only friendly layouts now start with the aura rows hidden, like the game's own. Turn them on in Blueprint Studio if you want them.
  • Your saved profiles carry over. Your layouts stay as you left them; to try the new defaults, make a new profile or pick a preset profile.
  • Colour by health is now a rule. Existing health colours are converted automatically.
  • When several rules hold, the last one in the list wins (it used to be the first).
  • The small lead bar under the threat text is gone; the threat text is coloured instead.
  • The /ps targetprobe test command is gone.

Known limits

  • The game hides some values in combat and in instances (some health, threat, aura and cast details). PlateSmith never guesses: a hidden value simply isn't shown, and a rule that depends on it doesn't apply.
  • While the game hides aura details, the debuff row is drawn by the game's own aura frame, which PlateSmith can only place, not restyle.
  • Clicking a threat window row spotlights a plate but can't target the mob: the game doesn't let addons do that.
  • Aura rows show everyone's or only your auras; they can't filter by spell or by dispel type.
  • English only for now.

Optional

  • Questie (quest icons), the PlateSmith QuestieDB companion (quest item drops), and LibSharedMedia (extra fonts and textures).

0.1.0-alpha.2 (2026-09-25)

  • Internal restructure: the addon's files are split into Core, Nameplates, Studio, Diagnostics and Threat folders. No changes players will notice.

This mod has no related projects