Create: Redstone Throttle

A Create addon that lets you precisely control rotational speed using redstone signals. Place a Redstone Speed Modulator between your power source and machines, apply redstone to its left/right sides, and dial in the exact RPM you need.

Features

Three control modes for different use cases
Goggles overlay – see output RPM and current mode at a glance
In-game GUI – Shift + Right-click to configure (scroll to adjust values, hold Shift for ×10)
Seamless Create integration – behaves like any kinetic block; works with shafts, gearboxes, chains, etc.

Modes

Strength Mode (default)

The redstone signal strength difference between the left and right inputs determines the speed offset. Each signal level adds ±0.5 RPM per interval. Think of it as an analog fine-tuner — great for precise, gradual adjustments.

Fixed Rate Mode

Each active side (signal > 0) adds or subtracts a fixed RPM step (configurable from 1 to 256). Left = +N RPM, Right = –N RPM, both or neither = no change. Ideal for stepped gear-shifting.

Strength × Multiplier Mode

Instantaneous, no accumulation. Output = Initial Speed + (left_signal - right_signal) × Multiplier. Perfect when you want direct, real-time redstone-to-speed mapping.

How It Works

Connect the modulator's back face (shaft side) to a rotating power source (water wheel, steam engine, etc.)
The front face outputs the modulated speed
Apply redstone signals to the left and right faces to adjust speed offset
The offset accumulates over time at the configured interval (0.3 – 10 seconds)

Dependencies

Create 6.0.10+
Minecraft 1.21.1
NeoForge

红石调速器 (Create: Redstone Throttle)

一个 机械动力 (Create) 附属模组，通过红石信号精确控制转速。在动力源和机器之间放置一个红石转速调节器，在左右两侧输入红石信号，即可精准调节输出 RPM。

特性

三种控制模式，适配不同场景
护目镜信息面板 — 佩戴工程师护目镜即可查看输出转速和当前模式
内置 GUI — Shift + 右键打开配置界面（滚轮调整数值，按住 Shift 加快 10 倍）
无缝 Create 集成 — 如同原版动能元件一般工作，兼容传动杆、齿轮箱、链条等

三种模式

红石强度模式（默认）

左右两侧红石信号强度差决定转速偏移量。每级信号 = ±0.5 RPM/间隔。像模拟微调旋钮一样，适合需要精细渐进调节的场景。

固定速率模式

每侧有信号（强度 > 0）即累加/减去固定 RPM 步长（可配置 1-256 RPM）。左侧 = +N RPM，右侧 = –N RPM。适合档位式变速。

强度倍率模式

即时响应，无累积过程。输出 = 初始转速 + (左信号 - 右信号) × 倍率。适合需要实时直接映射红石到转速的场景。

使用方法

将调制器背面（有轴连接面）对准旋转动力源（水车、蒸汽引擎等）
正面输出调制后的转速
在左/右两侧输入红石信号以调节转速偏移
偏移量按配置的间隔时间累积生效（0.3 - 10 秒）

Create:Redstone Throttle