P&W Sable Fix
Bring real overhead power to your physics trains.
A railway electrification compatibility addon for Minecraft 1.21.1 NeoForge, connecting Pantographs & Wires, Sable, and Create Electro Energetics. It provides redstone-controlled pantographs, functional overhead power collection, and moving electrical arc sounds.
Features
- P&W and native CEE pantographs rise when powered by redstone and lower when the signal is removed.
- P&W pantographs on Sable physics structures detect overhead wires using the structure’s position and orientation, collecting power from P&W or supported CEE wires.
- P&W contact and feeder wires participate in CEE’s electrical simulation, supplying onboard electrical loads.
- Multiple cantilevers on the same mounting block have independent, horizontally arranged electrical terminals. Inline insulators electrically separate wire sections.
- Contact with and separation from energized overhead wires produce arc sounds of different lengths, with the sound source following the moving structure.
Installation and Dependencies
Install pwsablefix-1.5.1.jar on both the client and server, and remove older versions of this addon. Java 21 is required.
| Component | Recommended version |
|---|---|
| Minecraft | 1.21.1 |
| NeoForge | 21.1.242 or later within 21.1.x |
| Create | 6.0.10 |
| Pantographs & Wires | 1.21.1-beta-0.2.3-C6 |
| Sable | 2.0.6 |
| Create Electro Energetics | 1.21.1-1.1.4 |
| DragonLib | 3.0.29 |
Usage
Use a CEE wire spool to connect your power source to a P&W connector or cantilever terminal, then build the supply network using P&W feeder and contact wires.
Connect the pantograph terminal, onboard electrical loads, and return wiring into a complete circuit. Apply a redstone signal to raise the pantograph into contact with an energized overhead wire. If the pantograph is registered to a cab desk, its VCB must also be closed.
Raising the pantograph alone does not guarantee power collection, and voltage does not necessarily mean that load current is flowing. Insulators interrupt electrical continuity only at their location; another power source or bypass may keep the opposite section energized.
Native CEE pantographs continue to collect power from CEE wires. This addon adds redstone raising and lowering control to them.
Configuration file: config/pwsablefix-common.toml
Redstone control, Sable structure contact detection, and CEE electrical integration are enabled by default.
P&W Sable Fix
让接触网真正为你的物理列车供电。
面向 Minecraft 1.21.1 NeoForge 的铁路电气兼容附属,连接 Pantographs & Wires、Sable 与 Create Electro Energetics,为移动物理列车提供红石升降弓、真实接触网取电和随车电弧音效。
功能
- P&W 与原生 CEE 受电弓:有红石信号时升弓,信号消失后降弓。
- Sable 物理结构上的 P&W 受电弓按车体位置与朝向检测接触网,从 P&W 或受支持的 CEE 导线取电。
- P&W 接触线、馈线参与 CEE 电路仿真,可向车载电气负载供电。
- 多腕臂横排独立端子,支持分别供电;线缆绝缘子支持分段隔离。
- 接触、脱离带电接触网时播放不同长度的电弧声,音源跟随物理结构移动。
安装与依赖
客户端与服务端均安装 pwsablefix-1.5.1.jar,并移出旧版同名附属。需要 Java 21。
| 组件 | 推荐版本 |
|---|---|
| Minecraft | 1.21.1 |
| NeoForge | 21.1.242 及以上的 21.1.x |
| Create | 6.0.10 |
| Pantographs & Wires | 1.21.1-beta-0.2.3-C6 |
| Sable | 2.0.6 |
| Create Electro Energetics | 1.21.1-1.1.4 |
| DragonLib | 3.0.29 |
使用
使用 CEE 线轴,将电源接入 P&W 接线器或腕臂端子,再用 P&W 馈线、接触线构成供电线路。
受电弓端子、车载负载与回流线路须组成闭合回路。施加红石信号后,受电弓升起并接触带电导线;若已登记到驾驶台,还需合上 VCB 主断路器。
升弓不保证取电,有电压也不代表一定存在负载电流。绝缘子只切断安装位置的连续导电,独立电源或旁路仍可能使另一侧带电。
原生 CEE 受电弓仍从 CEE 线网取电,本附属为其增加红石升降控制。
配置文件:config/pwsablefix-common.toml
默认启用红石控制、Sable 物理结构接触检测和 CEE 电路桥接。