Immersive Cables
You ever wondered if you could wire your Applied Energistics or Refined Storage network with those fancy Immersive Engineering cables? Well, now you can with this mod!
This adds transformers, connectors, relays and wires for you to be able to easily wire up your systems.
- Wire Coils: Used to connect transformers, relays and connectors with eachother
- Wire Coil Blocks: Decorative blocks and crafting material for transformers
- Relays: Can only connect to other transformers via wire; Do not connect to cabling or machines; Allow multiple wire connections
- Transformers:Connect network cabling or machines on their bottom side to your wiring network; Do not allow multiple wire connections
- Connectors: A mix of transformer and relay, they can connect to cabling or machines as well as allow multiple wire connections; Do not transfer networking information, only power
Applied Energistics info:
- Fluix wire has a range of 24 blocks and transfer 8 channels
- Dense fluix wire has a range of 16 blocks and transfer 32 channels
- Quartz fiber wire has a range of 16 blocks and can only transfer power
- Transformers have a power drain of 8 AE/t (Fluix) and 10 AE/t (Dense Fluix) each
- Relays have a power drain of 2 AE/t (Fluix) and 3 AE/t (Dense Fluix) each
- Connectors have a power drain of 1 AE/t (Quartz Fiber) each
- any value mentioned above can be changed via config - you can also enable/disable the AE module as a whole
Refined Storage info:
- Refined Fiber wire has a range of 16 blocks
- Transformers have a power drain of 12 RS/t each
- Relays have a power drain of 2 RS/t each
- any value mentioned above can be changed via config - you can also enable/disable the RS module as a whole
Crafting recipes (Applied Energistics):
needs: 2 aluminum wires, 2 pure fluix crystals and either a stick or treated wood stick
.
needs: 2 steel wires, 2 fluix crystals and either a stick or a treated wood stick
.
needs: 2 copper wires, 2 pure nether quartz crystals and either a stick or a treated wood stick
.
needs: 8 fluix wire coils and an iron ingot
.
needs: 8 dense fluix wire coils and an iron ingot
.
needs: 8 quartz fiber wire coils and an iron ingot
.
needs: 2 pure fluix crystals and 2 sky stone blocks
.
needs: 3 fluix crystals and 4 sky stone blocks
.
needs: 2 glass (any) and 2 pure nether quartz crystals
.
needs: a fluix relay, a fluix coil block and 5 iron ingots
.
needs: a dense fluix relay, a dense fluix coil block and 5 iron ingots
Crafting recipes (Refined Storage):
needs: 2 aluminum wires, 2 quartz enriched iron ingots and either a stick or a treated wood stick
.
needs: 8 refined fiber wire coils and an iron ingot
.
needs: 2 smooth stones and 2 quartz enriched iron ingots
.
needs: a refined relay, a refined fiber coil block and 5 quartz enriched iron ingots
Please note this mod requires the latest Immersive Engineering version!
The way IE wires work, are by connections; and a part stands out to me, that no matter how far two continous points are with wires between all the connectors, as long as the two endpoints are loaded, then it will register properly.
My question is, will this work the same with AE? I would like to wire my AE network for a long long distance, and the main issue of traditional AE is that ALL of the wires have to be chinkloaded, which is a big no no. Would this be a suitable replacement?
Thanks in advance!
Can it work with RF to power some machines from other mods?
I crafted two refined transformators and placed one of them on the bottom of my refined storage controller and the other I on the bottom of a storage drawer. But nothing happens. That´s weird. What did I wrong? Yes, I connected them both together with wire.Sorry, I need an External storage in between. Excuse me.
need AE2 feedthrough insulators!
ok so the point of this mod is what?
cause the way I read it it would allow me to to POWER my Applied energistics 2 networks with my Immersive Engineering power Generators, But it doesn't work like that so what good is it to claim this mod replaces an other mod when its missing the key feature?
In reply to torkkar:
The point of the mod is that it adds IE-like cables that work with AE2 power and machines. It doesn't merge the two power/machine systems.
ooooh late post i know but might as well give him/her information. better late than never
In reply to EisbarGFX:
first I'm a guy I'd hate to see a female with an old nordic name that means Strong (Torr) & Storm (Kkar) it'd be amusing but not sutable. Secondly I have since diagnosed the issue AE2's powercells register the IE charging & convert it as normal but the issue is when picking up a cell its color indicates charge level but its tool tip reads as 0% even when fully charged.
its a problem with AE2 & IE not this mod
Does this work with the latest revision for AE2 rev6?
In reply to mookie159069607:
Hey, I'm making a modpack and I would like to use this mod. Do I have your permission?
In reply to mystak3n:
Is there going to be a 1.11.2 version
Any plans to add other features originally added by Immersive Integration - the Industrial Coke Oven, for example? Judging by your mod's title, I suspect you'll be sticking to cables - but one can hope!
Does this mod require Immersive Engineering to function? Could it work with only Applied Energistics 2?
In reply to FLAMEMEMBER:
do you think you could add support for applied llamagistics? it's a fork of AE2 with more features
In reply to Escman1999:
In reply to SanAndreasP:
Beautiful.
EEEEEEEEE! IT WORKS WITH REFINED STORAGE!
I saw this and was like "damn... I'd love to use this with refined storage, cus its more user friendly and not as... tedious...." but then I saw the "optional librarys" section, saw that it works with refined storage, and got really happy! Cus, if it wasn't I was gunna ask if you could/what would it take to make it compatable, now all I'm doing is downloading YEY!!!