Create: Pit & Gantry 0.1.3-beta
Curse Maven Snippet
What's new
Added
- The Pit Controller turns itself to fit its gantry lines when placed (issue #3). Placed next to both lines, its shaft input goes to a free outer side (away from the lines): the side where a shaft, cog or motor can already drive it, otherwise the side the player looks at more. With one line or none it faces the player as before, but its input never points at a gantry shaft (it used to when the player looked along a line, and the line then joined the network). Sneaking while placing turns this off (it then simply faces the player). The wrench works as before, and the orientation is still only the block's facing, so schematics are unchanged.
- The gantry shafts turn with the rig (issue #2). When the head moves along the bridge, the bridge turns; when the bridge moves along the X line, the X line and the drawn far rail turn; on a diagonal move both. They turn at Create's rack-and-pinion ratio, by the distance travelled, so they stand still exactly when the rig does (drilling, waiting, the drill retracting). The real X line is only drawn turning on the client; its blocks, speed and network are not touched, and every other gantry shaft looks as before.
Fixed
- The rig always comes home at the end of a pit (issue #1). The drill head used to stop wherever it was when the last position was done (in the middle of the pit after a run over air). Now the drill first retracts straight up, its poles coming back into the slot as it rises ("Retracting the drill"), then the rig travels back to its home next to the controller ("Returning to the controller"), and only then is the pit "Finished" (comparator 15). Both moves use the head's travel speed and stand still without rotation or with a redstone signal.
- Reset no longer makes the rig vanish or circle over the pit (issue #1). A reset of a locked pit first brings the rig home the same way ("Resetting"); the field stays drawn until then, and only at home are the progress and the field cleared. As before, the controller then reads its lines again and starts over when it can.
- The drill head no longer chases the scan over air (issue #1). While the controller is still looking for the next block to mine, the head waits; it only travels to a position that really needs work, in a straight line. Air is scanned 16 times faster than other skipped positions, so a dug-out 55 × 50 × 8 pit is crossed in about a second.
- Layers that are all air no longer take extension poles.
- Drill head tooltip shows durability without the word blocks (Unbreaking makes the number not a block count).
This mod has no additional files