Build Wand — Minecraft Bedrock Add-on
What It Does
Build Wand is a custom tool that lets you fill, outline, or pattern-fill a 3D region with any building block — all from a simple in-game menu. Instead of placing blocks one at a time, you select two corner blocks to define a region and the wand handles the rest.
How to Get It
Use command /wand or caft it at a crafting table with this recipe:
E G E
_ S _
_ S _
E = Emerald
G = Gold Ingot
S = Stick
How to Use It
- Select your region —
Gold sparkles appear at each selected block to confirm your selection. After 2 seconds the fill menu opens automatically.Right-click to set your two corner positions:- **Click on a block** — uses that block's coordinates- **Click in the air** — selects the block you're looking at (up to 64 blocks away); if you're pointing at the sky, it uses your current feet coordinates (matching what "Show Coordinates" displays)
- Sneak + right-click — clears your selection so you can start over - Choose your block or category — Step 1 of the menu lets you pick a block from your hotbar, or a block category (Concrete, Stone & Bricks, Nether, etc.).
- Configure your fill — Step 2 shows the blocks in that category (if you picked one) along with the fill options: mode, replace toggle, pattern and pyramid settings. You can also go back to Step 1 if you chose wrong.
- Confirm — A confirmation page shows the size and number of blocks before anything is placed. Press Build to start, or Back to change your choices. Large fills run in the background and you'll get a chat message when they finish, with how long it took.
Fill Modes
- Fill — Fills the entire selected region solid with your chosen block.
- Outline — Places only the outer shell of the region, leaving the interior untouched. Works correctly for 3D boxes, flat 2D rectangles, and 1D lines.
- Walls — Places only the four vertical sides of the region, with no floor or ceiling.
- Floor/Ceiling — Fills only the bottom and top layers of the selection (or one layer if it's a single block high).
- Pattern — Places blocks in a repeating pattern across the region. Two pattern types are available:
- Checkerboard - Columns — Alternating diagonal pattern. Spacing controls how many blocks apart each placed block is.
- Checkerboard – 3D — Each layer is shifted by one block, so the pattern alternates up and down as well as across (like a 3D chess board). Uses the same spacing setting.
- Straight Line — Draws a straight line from Pos1 to Pos2 using a 3D Bresenham algorithm, with optional spacing between placed blocks.
- Pyramid — Create a pyramid (solid or hollow) by selecting Pos1 and Pos2 as the corners, and the pyramid will be built by building concentric squares/rectangles one block in and one block up from the base. If your positions are not equal height the base will be considered to be at the lower position and the higher position will be considered to be along the spine of the opposite edge but the pyramid will not replace blocks below and outside the higher position marker (even if replace is enabled), only blocks inside the original selection area will be replaced.
Replace Toggle
When Replace is enabled, existing blocks in the region are overwritten. When disabled, only air blocks are filled.
Survival Mode
In survival mode the wand checks your inventory before filling. If you don't have enough blocks to complete the fill, a confirmation screen tells you how many you have versus how many are needed and lets you choose to fill as many as you have or cancel. Protected blocks (bedrock, chests, etc.) are never cleared.
Block Categories
22 categories covering 358 building blocks — concrete, terracotta, glass, wool, copper (every stage, waxed or not), logs and wood for every tree, stone, deepslate and tuff, nether blocks, ores, and more. Or use any block from your hotbar. Blocks that don't exist in your version of Minecraft are hidden automatically.
Block Limit
Fills are limited by mode. Fill, Outline, Walls and Floor/Ceiling (creative): up to 8,388,608 blocks, placed very quickly (about 4 million in 7 seconds on a modest PC). Patterns, lines, pyramids, and anything in survival: up to 1,048,576 blocks, placed a block at a time while you watch (about 1 million in 23 seconds). The finish message shows how long the build took.
The wand loads the chunks it needs by itself, so far-away selections fill even when you aren't nearby — no need to walk around or raise your Simulation Distance. Selections that go above the build limit or below the bottom of the world are trimmed to fit.
Requirements
- Minecraft Bedrock 26.10 or newer (for version 1.3.x)
- No experimental toggles needed — Beta APIs are no longer required (1.3.0+)
- Install the .mcaddon, then add the behavior pack to your world — the resource pack is added (and removed) with it automatically