refinery-1.11.11.jar
Curse Maven Snippet
What's new
[1.11.11] - 2026-11-05
Fixed
- Seamless Sloped-to-Flat Conveyor Transition & Collision Wall Elimination (
ConveyorBeltBlock,SlopedConveyorBeltBlockEntity):- Resolved an issue where items reaching the top crest of a sloped conveyor belt would hit a vertical collision ledge, bounce into the air, or get permanently stuck at the transition to a horizontal flat conveyor.
- Replaced restrictive directional voxel shapes (
ITEM_ENTRY_SHAPES) inConveyorBeltBlockandRightAngleConveyorBeltBlockwithShapes.empty()forItemEntity, eliminating the 5-pixel vertical block collision wall at conveyor seams while preserving full solid collision for players and mobs. - Implemented clean conveyor hand-off logic in
SlopedConveyorBeltBlockEntity: once an item physically crosses the boundary into the next conveyor (rawT >= 1.0), ownership is relinquished immediately to prevent competing velocity and position conflicts. - Synchronized carrying surface heights across all conveyor types to
0.3125(5.0px), leveled off vertical velocity byrawT >= 0.82, and added an exit momentum boost to ensure silky-smooth glide onto flat conveyors.
[1.11.10] - 2026-11-05
Added
- Sloped Conveyor Belt Ground Support Legs & Foot Pads (
SlopedConveyorBeltModel&SlopedConveyorBeltRenderer):- Dynamically extended support leg trestles downwards to reach the floor or solid ground when chaining sloped conveyors together in multi-block ramps or elevated inclines.
- Automatically raycasts down up to 32 blocks beneath the elevated conveyor's support legs, detecting the exact top elevation of floor blocks, slabs, machine housings, or containers.
- Renders continuous aluminum support leg columns from the inclined bed frame all the way down to the surface, complete with heavy bolted foot pads (
UV_FOOT_PAD) resting on the floor. - Adds horizontal cross-bracing ties every 1-meter block interval down the entire height of the extended support legs.
- Expanded
SlopedConveyorBeltRenderer.getRenderBoundingBoxdownwards (expandTowards(0.0, -32.0, 0.0)) to ensure tall support legs are never frustum-culled.
[1.11.9] - 2026-11-05
Changed
- Refinery Tower South Takeoff Pipes Height Realignment (
RefineryTowerModel):- Realigned all three South-facing horizontal takeoff pipe and valve assemblies to match the exact block center elevations of connected pipes and output ports:
- Stage 1 (Liquid Tar,
TAR_PORTat Layer 0): lowered fromY = 22.0ftoY = 8.0f(0.5 * 16.0f), extending from the central drain sump cone (Z = 4.0f) out to the South face (Z = 18.5f .. 23.5f). - Stage 2 (Diesel,
DIESEL_PORTat Layer 3): lowered fromY = 60.0ftoY = 56.0f(3.5 * 16.0f), aligning dead-center with the Diesel Output Port. - Stage 3 (Gasoline,
GAS_PORTat Layer 6): lowered fromY = 115.0ftoY = 104.0f(6.5 * 16.0f), aligning dead-center with the Gasoline Output Port.
- Stage 1 (Liquid Tar,
- Realigned all three South-facing horizontal takeoff pipe and valve assemblies to match the exact block center elevations of connected pipes and output ports:
- Electric Arc Melter Hazard Stripe Texture Removal (
ArcMelterModel):- Removed yellow and black diagonal hazard stripe overlays from the Electric Arc Melter model, restoring authentic dark industrial metallurgy textures across all highlighted zones:
- Overhead raw ore charge hopper top intake flange: replaced with heavy steel
UV_CHARGE_HOPPER. - Foundation perimeter toe-kick strip: replaced with cast machine base
UV_TRUNNION_BASE. - Front and East tapping spout flange collars: replaced with ribbed refractory furnace shell
UV_FURNACE_SHELL.
- Overhead raw ore charge hopper top intake flange: replaced with heavy steel
- Removed yellow and black diagonal hazard stripe overlays from the Electric Arc Melter model, restoring authentic dark industrial metallurgy textures across all highlighted zones:
[1.11.8] - 2026-11-05
Added
- Refinery Tower Stage 1 Liquid Tar South Takeoff Pipe Assembly (
RefineryTowerModel):- Added a third South-facing horizontal takeoff valve assembly at
Y = 22.0fon the bottom section (Stage 1: Heavy Residue / Liquid Tar) of the 3×9×3 Petroleum Refinery Tower. - Symmetrically matches the rotated Stage 2 (
Y = 60.0f, Diesel) and Stage 3 (Y = 115.0f, Gasoline) takeoff valve assemblies, projecting cleanly towards the South (+Z) face with a crimson indicator handwheel when Stage 1 is active (UV_STAGE1_CRIMSON), completing the 3-stage visual takeoff system.
- Added a third South-facing horizontal takeoff valve assembly at
Fixed
- Refinery Output Port Fluid Auto-Push to Connected Pipes & Tanks (
RefineryPortBlockEntity):- Resolved an issue where distillation output liquids (Liquid Tar, Diesel, Gasoline) would not exit the Petroleum Refinery multiblock into connected fluid pipes or fluid storage containers.
- Implemented active fluid pushing in
RefineryPortBlockEntity.serverTick: every tick, fluid output ports (TAR_OUT,DIESEL_OUT,GAS_OUT, andBYPRODUCT_OUT) inspect all adjacent faces (Direction.values()) for connected NeoForge fluid handlers (Capabilities.Fluid.BLOCK, includingIndustrialPipeBlockEntity, tanks, and fluid containers) and automatically push up to 1,000 mB/t of matching output fluid directly into the connected network using transaction-safe transfers. - Enhanced controller lookup with fallback via
ReinforcedCasingBlock.findNearbyController(...)and automatic multiblock re-assembly synchronization (syncAssembly()), ensuring ports stay firmly connected to the tower even after block updates or chunk reloads.
- Electric Arc Melter & Hydraulic Casting Press Texture Flickering & Z-Fighting Resolution (
ArcMelterModel&CastingPressModel):- Atlas UV Padding Inset: Upgraded
UVRect.ofmargin inset padding from0.15pxto a robust0.5px((coord + 0.5f) / 256.0f), completely eliminating texture bleeding, shimmering, and edge flickering across adjacent atlas tiles during camera movement and mipmapping. - Ground Floor Z-Fighting Elimination: Suppressed emitting downward-facing (
DOWN) quads for foundation cuboids sitting on the ground (y0 <= 0.01f), preventing bottom runner faces from fighting with the top surface of floor blocks. - Foundation Cross-Beam & Deck Plate Disjoint Planes: Adjusted cross-beam heights in both
ArcMelterModel(y1 = 3.0f) andCastingPressModel(y1 = 3.5f) so the heavy foundation deck plates sit directly on top of the beams without sharing identical coplanar top surfaces. - Flange Ring & Platen Intersections: Offset water-cooling girth flange rings in
ArcMelterModel(8.05f .. 9.95fand28.05f .. 29.95f) and trimmed column locknuts inCastingPressModel(39.5f .. 41.5f) to prevent penetrating cuboids and edge collisions.
- Atlas UV Padding Inset: Upgraded
[1.11.6] - 2026-11-05
Added
- Refinery Byproduct Port Automatic Conveyor & Pipe Ejection (
RefineryPortBlockEntity):- Implemented automatic item ejection for the Byproduct Port (
refinery:byproduct_port) on the 3-Stage Petroleum Refinery multiblock tower. - Automatically detects item conveyors (
refinery:conveyor_belt,sloped_conveyor_belt,right_angle_conveyor_belt, and third-party conveyors viaisAnyConveyorBlock) and item pipes (IndustrialPipeBlockEntity, hoppers, chests, barrels, crates, and NeoForge item capability handlers) attached below (pos.below()) or beside the Byproduct Port (pos.relative(NORTH/SOUTH/EAST/WEST)and 1-block below). - Every 4 ticks, the Byproduct Port scans for adjacent conveyance channels and smoothly ejects solid byproducts (Bitumen, Tar, and extracted sand) from the controller's internal byproduct slots (slots 2–5 and 1) directly onto the conveyor belt surface or into connected pipes/containers.
- Integrated anti-clogging belt occupancy checks (
level.getEntitiesOfClass(ItemEntity.class, beltBox)), preventing item stacking or clumping by waiting until previously ejected items advance along the belt. - Implemented
WorldlyContainerdirectly onRefineryPortBlockEntityand updated item capability registration to allow multi-directional extraction through all horizontal and bottom faces of Byproduct Ports.
- Implemented automatic item ejection for the Byproduct Port (
[1.11.4] - 2026-11-05
Changed
- Refinery Tower Monolithic 3D Model Pipe Re-orientation & Vertical Header Removal:
- Removed the tall vertical grey collection header pipe that previously ran up the East (+X) side of the 3×9×3 Petroleum Refinery Tower.
- Rotated the Stage 2 (Diesel, orange section at
Y = 60.0f) and Stage 3 (Gasoline, green section atY = 115.0f) horizontal takeoff valve assemblies by 90 degrees around the column shell. Both stubby takeoff pipes now project cleanly towards the South (+Z) face (Z: 15.1f .. 23.5f), directly aligning with the South-facing Diesel Output Port ((0, 3, 2)) and Gas Output Port ((0, 6, 2)). - Cleared the redundant lower East bracket assembly at Stage 1, leaving the East side of the tower completely unencumbered for furnace placement.
[1.11.3] - 2026-11-05
Fixed
- Refinery Tower Stage Toggle Button Click & Interaction Resolution:
- Resolved an issue where clicking the Stage 1, Stage 2, or Stage 3 buttons (
S1,S2,S3) inRefineryScreenfailed to toggle stages. - Aligned stage button click listeners to execute immediate client prediction (
this.menu.clickMenuButton(...)) and server packet synchronization (handleInventoryButtonClick(...)) with UI button click audio feedback. - Upgraded
RefineryControllerBlockEntity.stillValid(Player)toContainer.stillValidBlockEntity(this, player, 16.0F), ensuring players interacting with member blocks across the large3×9×3multiblock tower do not trigger container reach invalidation when clicking stage toggles.
- Resolved an issue where clicking the Stage 1, Stage 2, or Stage 3 buttons (
Changed
- Dark Gunmetal Industrial Aesthetic Overhaul for Refinery & Furnace GUIs:
- Completely restyled the GUI textures (
refinery.png,burner_refinery_furnace.png,electric_refinery_furnace.png) using the dark gunmetal industrial steel palette (#2B3036), beveled frames, corner rivets, and recessed wells (#1D2126slots,#0E1318digital monitors) to matchMultiSmelterScreen,BlastFurnaceScreen, andIndustrialGrinderScreen. - Burner Refinery Furnace GUI Alignment (
BurnerRefineryFurnaceScreen&BurnerRefineryFurnaceMenu):- Re-aligned the 3 fuel input slots horizontally to
(12, 20),(30, 20),(48, 20)and the empty bucket return slot to(48, 47)with a downward fuel transfer arrow. - Added recessed wells for the 4× burn flame indicator
(11, 45, w: 34, h: 20)and furnace thermometer(67, 19, w: 12, h: 46)with 350 °C operating threshold line. - Integrated a dark CRT/LCD Digital Telemetry Monitor box
(88, 19, w: 77, h: 33)for temperature and flame status, plus a 3D beveled Redstone Mode toggle button(88, 54, w: 77, h: 14), eliminating all overlapping text collisions.
- Re-aligned the 3 fuel input slots horizontally to
- Electric Refinery Furnace GUI Alignment (
ElectricRefineryFurnaceScreen&ElectricRefineryFurnaceMenu):- Added recessed wells for the RF Energy Buffer gauge
(12, 19, w: 18, h: 46), induction coil heating chamber(34, 24, w: 28, h: 36)with active coil glow, and thermometer(66, 19, w: 12, h: 46). - Integrated the matching Digital Telemetry Monitor box
(88, 19, w: 77, h: 33)and 3D beveled Redstone Mode button(88, 54, w: 77, h: 14).
- Added recessed wells for the RF Energy Buffer gauge
- 3-Stage Petroleum Refinery GUI Overhaul (
RefineryScreen&RefineryMenu):- Organized the interface into 3 dedicated riveted panel plates: Feed & Heat (left), Fractional Distillation & Product Tanks (center), and Bitumen Byproduct (right).
- Positioned Crude Oil feed tank
(11, 19), Heat Input thermometer(31, 19), oil sand cracking groove(11, 53), and crude input/bucket return slots(12, 59)and(30, 59). - Centered the 3 vertical stage toggle buttons
S3,S2,S1at(56, 19/37/55, w: 24, h: 16)with 3D beveled styling, stage-specific active colors, and power LEDs. - Recessed sight-glass wells for Liquid Tar
(83, 19), Diesel(98, 19), and Gasoline(113, 19)with meniscus highlights, distillation progress groove(56, 73, w: 69, h: 5), and 2×2 Bitumen byproduct output slots(132/150, 37/55). - Added a recessed LED status bezel in the top-right header
(161, 5, w: 8, h: 8)with live green/red structure assembly status.
- Completely restyled the GUI textures (
[1.11.2] - 2026-11-05
Added
- 3-Stage Petroleum Refinery Tower Rebuild (
3×9×3Multiblock — Three3×3×3Stages):- Rebuilt the Petroleum Refinery into a towering 3×9×3 fractional distillation plant divided into three 3×3×3 vertical stages:
- Stage 1 (Bottom Third,
Y = 0..2): Heavy residue / Liquid Tar & Bitumen stage (350–500 °C). - Stage 2 (Middle Third,
Y = 3..5): Diesel Oil fractionating stage (180–350 °C). - Stage 3 (Top Third,
Y = 6..8): Gasoline / Petrol & overhead condenser stage (40–110 °C).
- Stage 1 (Bottom Third,
- Added individual Stage 1 / Stage 2 / Stage 3 Enable/Disable Toggles in the Refinery GUI (
RefineryScreen&RefineryMenu) allowing players to dynamically customize distillation yields per 1,000 mB Crude Oil:- Stage 1 only:
500 mBLiquid Tar +1Bitumen (100%). - Stage 2 only (Stage 1 & 3 disabled):
500 mBDiesel. - Stage 3 only (Stage 1 & 2 disabled):
500 mBGasoline. - Stage 1 + Stage 2 (Stage 3 disabled):
250 mBLiquid Tar +250 mBDiesel +1Bitumen (100%). - Stage 1 + Stage 3 (Stage 2 disabled):
250 mBLiquid Tar +250 mBGasoline +1Bitumen (100%). - Stage 2 + Stage 3 (Stage 1 disabled):
250 mBDiesel +250 mBGasoline. - All 3 Stages (Stage 1 + 2 + 3 enabled):
250 mBLiquid Tar +250 mBDiesel +250 mBGasoline + 25% chance at1Bitumen.
- Stage 1 only:
- Rebuilt the Petroleum Refinery into a towering 3×9×3 fractional distillation plant divided into three 3×3×3 vertical stages:
- Two External Refinery Furnaces (Heat Sources —
1×2×1Two-Block Vertical Units):- The 3-Stage Refinery Tower requires a heat source (
>= 350 °C, up to500 °C) placed adjacent to Stage 1 (Y = 0..2). Players choose which furnace to build and place:- Burner Refinery Furnace (
refinery:burner_refinery_furnace): Burns solid fuels and fuel buckets at 4× fast burn speed (BURN_SPEED = 4) across 3 fuel input slots with an empty bucket return slot. - Electric Refinery Furnace (
refinery:electric_refinery_furnace): High-power RF/FE heater consuming 500 FE/t from a 500,000 FE internal energy buffer.
- Burner Refinery Furnace (
- Each furnace is placed from a single item as a 2-block-tall (
1×2×1) structure (FurnacePart.LOWER&FurnacePart.UPPER) and strictly drops only 1 item when broken from either the top or bottom block.
- The 3-Stage Refinery Tower requires a heat source (
- Liquid Tar Fluid, Bucket & Liquid Tar Port:
- Registered Liquid Tar (
refinery:liquid_tar,refinery:flowing_liquid_tar), Liquid Tar Bucket (refinery:liquid_tar_bucket), and Liquid Tar Port (refinery:tar_port), plus shapeless crafting of 1 Liquid Tar Bucket into 4 Petroleum Tar items and full Storage Tank support.
- Registered Liquid Tar (
- Zero-Flicker Monolithic 3D Models (
RefineryTowerModel&RefineryFurnaceModel):- Created a 16-sided polygonal cylinder/frustum emitter (
emitCylinder&emitFlangeRing) with strictly sequential, non-overlapping vertical segments and0.5pxUV inset margins to completely eliminate coplanar Z-fighting and texture flickering on both the 3×9×3 Refinery Tower and 1×2×1 Refinery Furnaces.
- Created a 16-sided polygonal cylinder/frustum emitter (
[1.10.25] - 2026-11-05
Fixed
- Texture Flickering & Z-Fighting Resolution (
ArcMelterModel&CastingPressModel):- Re-architected both monolithic models to use the robust pre-computed
Cuboid+UVRectsystem with 0.15px0.15px margin padding, eliminating edge-bleeding and polygon border shimmer. - Eliminated all coplanar surface overlap and penetrating box geometry on foundation skids, trunnions, and control consoles that previously caused severe Z-fighting and visual flickering.
- Corrected face normal transformations by passing the active
PoseStack.Poseintoconsumer.setNormal(pose, nx, ny, nz), guaranteeing consistent diffuse shading and lighting as models rotate across cardinal directions.
- Re-architected both monolithic models to use the robust pre-computed
- Operator Control Console Texture Wrapping & Alignment:
- Corrected UV coordinates for
UV_CONSOLE_FRONTandUV_PLC_FRONTto exactly match the 256×256256×256 atlas definitions at(0, 96, 64, 48), properly rendering digital touchscreens, ammeter and hydraulic tonnage dials, pushbuttons, and yellow emergency stop collars. - Mapped operator consoles as single non-overlapping cuboids: the North face displays the instrument faceplate while the remaining 5 faces render seamless painted metal enclosure casing (
UV_CONSOLE_CASINGandUV_PLC_CASING), preventing texture stretching across thin edges.
- Corrected UV coordinates for
Added
- Monolithic 3D Model & Procedural Texture Atlas Engineering Guide (
MONOLITHIC_3D_MODEL_GUIDE.md):- Added a comprehensive architectural reference and blueprint guide for creating high-fidelity monolithic 3D models and procedural texture atlases for multiblock machines in Minecraft 26.3 NeoForge.
- Includes full explanations of the 0.15px padding formula, zero-overlap rules, procedural Java2D painting techniques, multiblock member block concealment, and complete copy-paste ready Java code templates.
[1.10.23] - 2026-11-05
Added
- Electric Arc Melter Monolithic 3D Model & 256×256 Texture Atlas (
ArcMelterModel&arc_melter.png):- Redesigned the assembled 3×3×3 Electric Arc Melter (
refinery:arc_melter_controller) into a monolithic 3D Industrial Electric Arc Furnace (EAF) modeled after real-world water-cooled steelmaking arc furnaces. - Features a heavy rocker trunnion foundation skid, cylindrical water-cooled ribbed steel shell with vertical buckstay stiffeners, interior magnesia-carbon refractory crucible hearth, front armored quartz slag/observation door at
(0, 1, 0)with emissive arc glare, eccentric bottom-tapping (EBT) refractory launder spout at(1, 0, 0)(Y: 4..9) aligning seamlessly with Open Casting Channels, rear-left high-voltage step-down EAF transformer vault with oil-cooling radiator fins and 3 heavy copper busbar tubes, twin rear hydraulic gantry mast columns, domed water-cooled roof with refractory delta insert, top flared charge hopper at(0, 2, 1), and front-left operator control console. - Dynamic Operational Animations:
- 3 reciprocating graphite carbon electrodes arranged in a delta triad held by copper water-cooled clamp arms that oscillate vertically during active melting.
- Incandescent glowing electrode tips and 3D jagged full-bright electric arc plasma bolts (
15728880light) leaping from all 3 electrodes into the molten bath when active. - Dynamically rising and falling full-bright molten metal bath surface inside the crucible and flowing tapping stream along the launder spout, dynamically tinted to match the active molten fluid (
molten_iron,molten_gold,molten_copper,molten_tin,molten_bronze,molten_glass). - Loaded input ore/dust/ingot rendered sinking into the top charge hopper (
(0, 2, 1)), with physical item entity absorption for items dropped into the top funnel.
- Redesigned the assembled 3×3×3 Electric Arc Melter (
- Continuous Casting Press Monolithic 3D Model & 256×256 Texture Atlas (
CastingPressModel&casting_press.png):- Redesigned the assembled 3×3×3 Continuous Casting Press (
refinery:casting_press_controller) into a monolithic 3D Heavy Hydraulic Continuous Casting & Quenching Press. - Features a reinforced steel foundation bed, central water-cooled copper & refractory crystallizer mold basin at
(0, 0, 1), 4 precision-ground chrome tie-rod columns with castle locknuts, overhead cast-steel crown platen topped by a high-tonnage crimson-amber main hydraulic cylinder and twin return boosters, front safety grille observation window at(0, 1, 0), upper refractory tundish & sloped launder chute at(0, 1, 2), lowerY=0(Y: 3..9) refractory channel receiver troughs at(0, 0, 2)and(-1, 0, 1)with animated glowing molten inflow streams, right-side water-cooling manifold cabinet, motorized steel run-out roller table extending through(1, 0, 0), and front-left PLC operator control cabinet. - Dynamic Operational Animations:
- Reciprocating hydraulic ram crosshead (with diagonal hazard stripes, bronze guide bushings sliding along the 4 chrome tie-rods, chrome piston rods, and water-cooled copper upper stamping die) that accelerates downward during ticks
0..90, holds high-pressure quench compression during90..150, and retracts smoothly during150..240. - Dynamic molten pool to incandescent solidified billet transition inside the mold cavity and animated billet/item transport along the right-hand run-out roller table (
(1, 0, 0)).
- Reciprocating hydraulic ram crosshead (with diagonal hazard stripes, bronze guide bushings sliding along the 4 chrome tie-rods, chrome piston rods, and water-cooled copper upper stamping die) that accelerates downward during ticks
- Redesigned the assembled 3×3×3 Continuous Casting Press (
Changed
- Seamless Multiblock Assembly, Channel Flow & Pipe/Conveyor Connectivity:
- All 9 Arc Melter and Casting Press controller and member blocks (
arc_melter_controller,melter_casing,melter_chamber,melter_input_port,melter_output_port,casting_press_controller,casting_casing,casting_basin,casting_chamber,casting_input_port,casting_output_port) now transition toRenderShape.INVISIBLEwithShapes.empty()occlusion whenASSEMBLED = true, forwarding right-click interactions to the controller GUI and disassembling cleanly if broken. - Registered Energy, Item (
WorldlyContainerWrapper), and Fluid capabilities across all assembled member blocks of both machines so pipes, conveyors, hoppers, energy cables, and Open Casting Channels can connect to ports or any assembled casing/basin block (including levelY=0channel runs directly from the Arc Melter output port into the Casting Press). - Added automatic finished-item export (
tryExportOutput) onCastingPressControllerBlockEntityto eject cast ingots and blocks onto adjacent conveyor belts, item pipes, and containers at(1, 0, 0).
- All 9 Arc Melter and Casting Press controller and member blocks (
[1.10.21] - 2026-11-04
Fixed
- Plate Stamping Die Crafting Progression (
refinery:plate_die):- Changed
data/refinery/recipe/plate_die.jsonto craft from 4 Steel Ingots (#c:ingots/steel) instead of Steel Plates (#c:plates/steel), resolving the circular progression dependency where making a Plate Die required plates that could only be stamped using a Plate Die.
- Changed
[1.10.19] - 2026-11-04
Fixed
- Steel Gear Recipe Tag (
refinery:steel_gear):- Created
data/c/tags/item/ingots/steel.json(#c:ingots/steel) and linked it indata/c/tags/item/ingots.json, fixingMissing tag: 'c:ingots/steel' in 'minecraft:item'during datapack registry loading.
- Created
- Valve Pipe Upgrade Shapeless Recipe (
refinery:valve_pipe_upgrade):- Updated
data/refinery/recipe/valve_pipe_upgrade.jsonto use Minecraft 26.3 flat string ingredient syntax instead of legacy{"item": ...}objects, fixingList is too short: 0, expected range [1-9]on startup.
- Updated
[1.10.17] - 2026-11-04
Added
- Industrial Valve Pipe (
refinery:valve_pipe):- Added the Redstone Valve Pipe capable of opening and closing transit for both fluids and items based on redstone signals and attached Pipe Gates.
- Supports Normal Mode (valve closes when redstone signal is applied) and Inverted Mode (valve opens when redstone signal is applied).
- Mode toggled seamlessly in-world by right-clicking the valve pipe with the Refinery Wrench, displaying action bar feedback and playing mechanical switch sounds.
- Directly compatible with BuildCraft-style Pipe Gates (e.g. Tank Full, Space in Inventory, Redstone Signal) mounted on the pipe or adjacent blocks.
- When closed, fluid pushing and item dispatch into the valve pipe are blocked, holding traveling items in place until the valve re-opens.
- Added shaped crafting recipe (Steel Ingot + Redstone) yielding 8 valve pipes, plus a shapeless upgrade recipe converting steel pipes with redstone.
- Classic Spool Pipe Wire Icons:
- Redesigned Red, Blue, Green, and Yellow Pipe Wire icons (
pipe_wire_red,pipe_wire_blue,pipe_wire_green,pipe_wire_yellow) with warm golden-amber wooden spool flanges, wrapped colored wire coils, and an unspooling wire tail extending downward.
- Redesigned Red, Blue, Green, and Yellow Pipe Wire icons (
Changed
- Pipes Guide Book Entry:
- Updated the in-game Guide Book's industrial pipes entry with documentation for the Redstone Valve Pipe and its wrench interaction.
[1.10.15] - 2026-11-04
Added
- Industrial Stamping Dies for Metal Press:
- Introduced 4 dedicated stamping dies: Plate Die (
refinery:plate_die), Gear Die (refinery:gear_die), Corrugated Steel Die (refinery:corrugated_die), and Rail Die (refinery:rail_die). - Added shaped crafting recipes for all 4 dies using steel plates and ingots.
- Registered
#refinery:press_diesitem tag grouping all valid press tooling.
- Introduced 4 dedicated stamping dies: Plate Die (
- Machinery Gears & Stamping:
- Registered 6 industrial gears: Steel Gear (
refinery:steel_gear), Iron Gear (refinery:iron_gear), Copper Gear (refinery:copper_gear), Bronze Gear (refinery:bronze_gear), Gold Gear (refinery:gold_gear), and Tin Gear (refinery:tin_gear). - Added hand-crafting recipes (4 ingots in a cross) and common tags (
#c:gearsand#c:gears/<metal>). - In the Metal Press, inserting a Gear Die allows cold-forming 1 metal ingot or plate directly into 1 gear with 4x material efficiency.
- Registered 6 industrial gears: Steel Gear (
- Corrugated Steel Block & Rail Stamping:
- With the Corrugated Steel Die installed, rolling 1 Steel Ingot (or plate) yields 4 Corrugated Steel Panels (
refinery:corrugated_steel_panel), and 1 Iron Ingot/Plate yields 2 panels. - With the Rail Die installed, 1 Steel Ingot/Plate stamps into 4 Rails (
minecraft:rail), 1 Iron Ingot/Plate stamps into 2 Rails, 1 Gold Ingot/Plate stamps into 2 Powered Rails, and 1 Copper Ingot/Plate stamps into 2 Activator Rails.
- With the Corrugated Steel Die installed, rolling 1 Steel Ingot (or plate) yields 4 Corrugated Steel Panels (
- In-Game Guide Book Documentation:
- Updated the Hydraulic Metal Press entry with detailed documentation on die requirements, tooling slot mechanics, and all 4 stamping recipe types.
Changed
- Hydraulic Metal Press Die Requirement & GUI Upgrade:
- Expanded the Metal Press inventory to 5 slots: Slot 0 dedicated to Tooling Dies (max stack 1), Slots 1..2 for Inputs, and Slots 3..4 for Outputs.
- The press strictly requires an installed Die to operate; stamping cycles now validate the die tooling before consuming energy or cycling the hydraulic ram.
- Upgraded the GUI layout and texture (
metal_press.png) with a beveled Die slot frame beneath the ram, an empty-slot tooltip guide, and ram hover tooltips showing the installed die and stamping status. - Shift-click smart routing directs dies to the die slot, pressable materials to inputs, and finished goods to the player inventory.
- Automation (hoppers, conveyors, pipes) extracts exclusively from output slots (3..4) and inserts into material inputs (1..2), protecting installed dies from extraction.
[1.10.14] - 2026-11-04
Added
- Dedicated Pipe Facades Creative Tab (
itemGroup.refinery.facades):- Moved all dynamic Pipe Facades (both Solid Panels and Pass-Through Frames) out of the main Industrial Refinery creative tab into their own dedicated creative tab (
refinery_facades_tab), preventing clutter in the main mod item tab.
- Moved all dynamic Pipe Facades (both Solid Panels and Pass-Through Frames) out of the main Industrial Refinery creative tab into their own dedicated creative tab (
- Dynamic Real-Block Texture Rendering for Pipe Facade Item Models (
PipeFacadeSpecialRenderer):- Registered a Minecraft 26.3
SpecialModelRendererforpipe_facadeandpipe_facade_holeitems viaRegisterSpecialModelRendererEvent. - Automatically samples the target block's native
TextureAtlasSpritefromTextureAtlas.LOCATION_BLOCKSat runtime, rendering every facade item in creative menus, player inventories, and hand models with its true block texture (Stone, Oak, Corrugated Steel, Bronze, etc.) and 3D plate thickness rather than a generic flat gray sprite.
- Registered a Minecraft 26.3
Changed
- Slender Horizontal Rectangular 3D 8-Bit Pipe Icons:
- Re-proportioned all 23 pipe item icons to slender horizontal rectangles (16px collar height, 12px shaft height, 30px width; 2.5:1 aspect ratio), matching the slender profile of classic Mario pipes.
- Retains all crisp 8-bit details: flanged collars, top specular highlight stripes, dark notch grooves, deep body mid-tones, 1x1 checkerboard dithering, bottom bounce highlights, and centered 5x7 fluid droplet indicators for liquid pipes.
[1.10.12] - 2026-11-04
Fixed
- Pipe Facade CustomRecipe Network Packet Encoding (
neoforge:recipe_content):- Fixed a disconnect crash (
EncoderException: Failed encoding custom payload neoforge:recipe_content: IllegalStateException: Can't encode 'com.refinery.recipe.PipeFacadeRecipe@...', expected '...') when joining a world by registeringPipeFacadeRecipe.INSTANCEandPipeFacadeSwapRecipe.INSTANCEsingletons withequalsandhashCodeimplementations forMapCodec.unit(...)andStreamCodec.unit(...).
- Fixed a disconnect crash (
- Tin Ore & Deepslate Tin Ore Loot Table Validation (
Unreachable entry!):- Updated
data/refinery/loot_table/blocks/tin_ore.jsonanddeepslate_tin_ore.jsonto use the Minecraft 26.3"condition": "minecraft:tool/can_silk_touch"syntax instead of the non-existent#minecraft:enchantments/silk_touchtag, resolvingReloadableServerRegistriesloot table validation warnings and restoring Silk Touch drops.
- Updated
[1.10.11] - 2026-11-04
Changed
- Authentic 3D 8-Bit Pixel Art Pipe Item Icons:
- Replaced legacy blurred vector/anti-aliased pipe icons with crisp 32x32 3D 8-bit retro arcade pixel art pipe icons inspired by classic Mario pipes.
- Features flanged collar rims on both ends with vertical rim highlights, specular top highlight stripes, grooved notch separators, deep cylindrical body shading, 1x1 checkerboard dither shading at the base, and bottom bounce specular reflection.
- Tailored distinct material palettes across all 23 pipe types: Wood, Copper, Iron, Steel, Gold, Diamond, Emerald (reference green pipe), Brass, Cast Iron, Void, Quartz/Merge, Buffer, and Structure.
- Added a distinct 8-bit fluid droplet emblem marking in the center of all liquid transport pipes (
wood_fluid_pipe,copper_fluid_pipe,iron_fluid_pipe,steel_fluid_pipe,gold_fluid_pipe,diamond_fluid_pipe,cast_iron_fluid_pipe,fluid_extractor_pipe, andmerge_fluid_pipe) for immediate visual distinction between item and liquid conduits in inventory screens. - Added dedicated status badges for utility pipes: golden extraction chevrons for extractor pipes, storage latches for buffer pipes, and swirling singularity vortexes for void pipes.
[1.10.10] - 2026-11-04
Added
- BuildCraft-Style Pipe Facades (
refinery:pipe_facade&refinery:pipe_facade_hole):- Added Solid Pipe Facades (
refinery:pipe_facade) and Pass-Through (Hollow) Pipe Facades (refinery:pipe_facade_hole) that conceal pipes behind 2/16-inch (0.125block) structural wall panels on any of the 6 faces (DOWN,UP,NORTH,SOUTH,WEST,EAST) of any Industrial Pipe or Buffer Pipe. - Live Registry Scanning & Dynamic Texture Wrapping (
PipeFacadeHelper&PipeFacadeRenderer):- Automatically scans
BuiltInRegistries.BLOCKat runtime to support any full-cube, opaque block from Vanilla, Industrial Refinery (including all 17 Corrugated Steel Panels, metal/ore storage blocks, Oil Shale, and industrial casings), and third-party mods without pre-generating thousands of static asset files. - Automatically filters out problematic non-solid or special blocks (glass, ice, leaves, grass blocks, slime/honey, TNT, redstone components, spawners, portals, liquids, falling blocks, and block entities).
- Wraps the target block's native
TextureAtlasSpritedirectly onto the 3D facade geometry onTextureAtlas.LOCATION_BLOCKS, automatically preserving LabPBR 1.3 specular reflections (_s) and Parallax Occlusion Mapping (_n) in shaders like Complementary Unbound.
- Automatically scans
- Crafting & Conversion Recipes (
PipeFacadeRecipe&PipeFacadeSwapRecipe):- Solid Pipe Facade (x8): 1 eligible full block in the center surrounded by 8 Copper Item Pipes (
refinery:copper_item_pipe). - Solid <-> Pass-Through Conversion: Place any Solid Pipe Facade alone in a crafting grid to convert it 1-to-1 into a Pass-Through Facade with a centered pipe opening (
4.8/16to11.2/16), or convert a Pass-Through Facade back into a Solid Facade.
- Solid Pipe Facade (x8): 1 eligible full block in the center surrounded by 8 Copper Item Pipes (
- In-World Attachment & Removal:
- Right-click any pipe with a Pipe Facade to attach it to the targeted face (or opposite face when clicking the center core).
- Shift + Right-Click a facaded pipe face with a Refinery Wrench or empty hand to pop that side's facade off, or break the pipe to drop all attached facades.
- Added Solid Pipe Facades (
- Structure Pipe (
refinery:structure_pipe):- Added a low-cost structural pipe (
2 Cobblestone + 1 Gravel -> 8 Structure Pipes) with a solid cobblestone-gray finish and no glass window cutouts. - Does not transfer items or fluids (
handlesItems = false,handlesFluid = false), preventing unwanted item or liquid routing while connecting seamlessly to all pipe networks to carry Pipe Wires (Red,Blue,Green,Yellow), mount Pipe Logic Gates, and hold Pipe Facades.
- Added a low-cost structural pipe (
This mod has no additional files