Description
Power Grid: Dynamo
In real life, every DC motor is also a generator: spin it, and it makes voltage. Create: Power Grid's Electric Motor only works one way. This add-on gives it a Mode setting so it does both.
How it works
- Look at the top of an Electric Motor and pick Motor (normal) or Generator with a 12, 24, 30, 60, 120 V or stock (258 V) winding.
- Turn its shaft from any source and wire up your loads. Voltage rises with RPM, and reversing the shaft flips the polarity.
- Drawing current makes the shaft harder to turn. It takes stress from your kinetic network, using the same physics as Power Grid's own induction generator.
- It never takes more stress than your shaft has free. The voltage sags instead of stalling your machines.
- Goggles show the winding, volts, amps and watts.
Numbers (default configs)
| Shaft speed | Voltage | Max power |
|---|---|---|
| 64 RPM | 65 V | 41 W |
| 128 RPM | 129 V | 163 W |
| 256 RPM | 258 V | 652 W |
Voltage is for the stock winding with nothing connected. Max power is the most it can deliver to a load. Every winding gives the same power; lower-voltage windings just give more current.
Good to know
- On a battery bus, put a diode between the dynamo's + and your batteries, or a stopped dynamo will drain them, just like a real dynamo without its cut-out.
- Multiplayer: install it on the server and on every client.
- Requires Create: Power Grid 0.6.2. Each Power Grid update needs a matching Dynamo update.
Credits
An unofficial add-on for Create: Power Grid by patryk3211. Source code and issue tracker: GitHub. Licensed under Apache 2.0.
