Ender IO: Pressure Conduits

(Unofficial Ender IO Add-on / PneumaticCraft Integration)

Please scroll down for the Chinese Description. / 中文介绍请向下滑动查看。

🇬🇧 English Description

🛑 Requirements & Compatibility

• Loader: NeoForge (1.21.1)
• Dependencies: Ender IO, PneumaticCraft: Repressurized. (Please use the latest versions available).
• Optional Dependency: Jade (Highly recommended. Enables HUD info for conduit specs).
• Safe to Install: This mod can be added to existing worlds without corrupting your saves.

💎 Core Features

1. Three Tiers of Pressure Conduits

• Basic Pressure Conduit: 1000 mL/t transfer rate, Max pressure of 7.0 bar.
• Reinforced Pressure Conduit: 3000 mL/t transfer rate, Max pressure of 25.0 bar.
• Advanced Pressure Conduit: 6000 mL/t transfer rate, Max pressure of 25.0 bar.
• Supports smooth, in-place upgrading by right-clicking a lower-tier conduit with a higher-tier one.

2. Ender Space Technology (Zero Volume)

• Unlike native PneumaticCraft tubes, these conduits boast zero internal volume. They act as instant, lossless transmission brokers. You will never hear hissing leak sounds from connected machines, nor will you suffer from the massive pressurization delays typical of large pipe networks.

3. Perfect Thermodynamic Balancing

• Air transfer relies on strict fluid dynamics and pressure difference formulas algorithm. It smartly prevents sloshing, over-pressurizing small machines, and ghost vacuums, ensuring buttery-smooth pressure equalization.

4. Overpressure Explosions

• Staying true to the hardcore nature of PneumaticCraft! If the pressure of a connected machine exceeds the conduit's maximum threshold, the specific conduit will realistically explode and be destroyed (This feature can be toggled off in the config).

5. Full Ender IO Integration

• Seamlessly supports 16 IO color channels for separated networks within the same block.
• Fully responsive Redstone control modes for dynamic logistics management.
• Compatible with Conduit Facades for a clean aesthetic.

6. Jade HUD Support

• Aiming at a conduit bundle will immediately display its Max Transfer Rate and highlighted Critical Pressure Limit via Jade, helping you prevent explosive accidents in your base.

📜 License & Modpack Policy

• Copyright (c) Saku_rain - ALL RIGHTS RESERVED
• Modpack Policy: You are completely free and warmly welcome to include this mod in your modpacks, provided they are hosted on official platforms (like CurseForge/Modrinth).

🇨🇳 中文介绍

🛑 前置要求与兼容性说明

• 运行环境: 1.21.1 (NeoForge)
• 必要前置: 末影接口 (Ender IO), 气动工艺 (PneumaticCraft: Repressurized)。
• 可选前置: Jade（强烈推荐，安装后可开启 HUD 信息显示）。
• 安全安装: 本模组可随时无缝加入现有的存档中，不会损坏存档数据。

💎 模组核心特性

1. 三级气压导管与平滑升级

• 基础气压导管: 1000 mL/t 流量，承压极限 7.0 bar。
• 强化气压导管: 3000 mL/t 流量，承压极限 25.0 bar。
• 高级气压导管: 6000 mL/t 流量，承压极限 25.0 bar。
• 配方层层递进，且支持玩家手持高级导管直接右键底阶导管进行原位平滑替换。

2. 末影空间技术（零体积无损耗）

• 与原版气动管道不同，本导管网络内部不占用任何体积。它能实现瞬时、无损的气压传导，且完美密封！相连机器绝不会发出裸露时的“呲呲漏气声”，极大优化了气动原版庞大管网带来的充气延迟。

3. 完美的热力学压差平衡

• 底层传输逻辑严格按照气压差和两端容器体积动态计算实际流量。从根本上杜绝了气压反复震荡、幽灵负气压、以及“小体积机器被无脑塞爆”的恶性 Bug。

4. 硬核的超压防爆机制

• 原汁原味继承气动工艺的“危险美学”。如果相连机器的内部气压超过了当前气压导管的承压极限，导管将会发生真实的定向爆炸并粉碎移除！（该爆破特性可在配置文件中随时关闭以照顾休闲玩家）。

5. 深度融入 EIO 本土体系

• 在一个方块内完美支持 16 色独立的输入/提取频道隔离，再混乱的管线也能轻松理清。
• 支持原生丰富的红石控制模式，由玩家随心掌控抽气时机。
• 完美兼容导管伪装板遮挡。

6. Jade 完美兼容

• 当准星对准导管束时，HUD 会直观呈现当前气压导管的“最大流量”以及标红的“承压极限”，妈妈再也不用担心我接错管道炸毁基地了。

📜 版权声明与整合包政策

• 版权所有 (c) Saku_rain - 保留所有权利 (ALL RIGHTS RESERVED)
• 整合包政策： 只要通过合规的官方平台（如 CurseForge 或 Modrinth）发布，非常欢迎各位作者将本模组加入到你们的整合包中。