🦾 Let it Walk: ComputerCraft Addon (letitwalk_cc)
Let it Walk: ComputerCraft Addon brings complete ComputerCraft (CC: Tweaked) programmable control to walking contraptions from the Let it Walk! mod.
Build automated mechs, programmable patrol drones, telemetry cockpits, remote pilots, and automated cargo transports using Lua!
⚡ Highlights
- 🔌 Plug & Play Peripheral: Simply place a Computer or Wired Modem directly next to a Pilot Controls, a Walker Core, or the dedicated Walker Computer Interface block.
- 🕹️ Complete Mech Kinematics: Full mechanical leg drive, gear shifting, lateral crab walking, high-speed galloping, kinetic suspension jumps, chassis leaning, and dash boosts.
- 🛰️ High-Precision Telemetry: Read real-time world coordinates, velocity vectors, chassis yaw/pitch/roll angles, fuel levels, stress RPM, and leg count directly from Lua.
- 🌐 CC: Sable & Celestial Navigation Compatible: Works seamlessly with CC: Sable Sub-Level physics tracking and Create Navigation Table compass bearings.
📦 Requirements
| Mod | Version |
|---|---|
| Minecraft | 1.21.1 |
| NeoForge | 21.1.x |
| Let it Walk! | 0.1.4 or 0.1.5+ |
| CC: Tweaked | 1.120.2+ |
| Create | 6.0.10+ |
| Sable | 2.0+ |
(Optional recommended: CC: Sable for native sub-level coordinate vectors)
🚀 Quick Start
1. Connecting Your Computer
You have three easy ways to interface a computer with your mech:
- Adjacent Computer: Place any CC computer touching the Pilot Controls or Walker Core.
- Wired Modem: Connect a Wired Modem and networking cable to the Pilot Controls or Walker Core.
- Walker Computer Interface Block: Craft and install the dedicated Walker Computer Interface block anywhere on your walker contraption chassis.
2. Basic Lua Example
Open your computer terminal and test the peripheral:
local walker = peripheral.find("walker")
if not walker then
error("No walker peripheral found! Connect to Pilot Controls or Walker Core.")
end
-- Unpark the mech and shift to Gear 2
walker.setParked(false)
walker.setGear(2)
-- Drive forward for 3 seconds (60 ticks)
print("Striding forward...")
walker.setDrive(1.0, 0.0, 60)
-- Check live position and speed
local status = walker.getStatus()
print(string.format("Position: X=%.1f, Z=%.1f | Speed: %.2f blocks/sec", status.x, status.z, math.sqrt(status.vx^2 + status.vz^2)))
📚 Complete Lua Peripheral API
Once wrapped (local walker = peripheral.find("walker")), the peripheral exposes:
🚶 Drive & Locomotion
| Method | Description |
|---|---|
walker.setDrive(throttle, steer, [ticks]) |
Drives the mech forward/backward (-1.0 to 1.0) and lateral stride (-1.0 to 1.0) for [ticks] (or continuous if omitted). |
walker.forward([ticks]) |
Strides forward for [ticks] (or continuous). |
walker.back([ticks]) |
Strides backward for [ticks] (or continuous). |
walker.left([ticks]) |
Strides left for [ticks] (or continuous). |
walker.right([ticks]) |
Strides right for [ticks] (or continuous). |
walker.step(direction, [ticks]) |
Takes a discrete step in "forward", "back", "left", or "right" direction for [ticks]. |
walker.turn(rate, [ticks]) |
Applies steering yaw turn rate (-1.0 to 1.0) for [ticks]. |
walker.stop() |
Instantly cancels all active drive inputs and brakes to a halt. |
walker.setRawKeys(keysBitmask, [ticks]) |
Direct low-level key bitmask injection (Forward=1, Back=2, Left=4, Right=8, Jump=64, Sprint=128). |
walker.getRawKeys() |
Returns the active raw key bitmask. |
⚙️ Transmission & Gears
| Method | Description |
|---|---|
walker.setGear(gear) |
Shifts transmission gear (1 to 5). Fails if rotational RPM is too low for that gear. |
walker.getGear() |
Returns current active gear (1 to 5). |
walker.getMaxGear() |
Returns maximum unlocked gear supported by the current input RPM. |
walker.getRpm() |
Returns input rotational speed in RPM. |
🦀 Modes & Suspension
| Method | Description |
|---|---|
walker.setCrabWalk(boolean) |
Enables or disables lateral crab-walking mode. |
walker.isCrabWalk() |
Returns true if crab-walking mode is active. |
walker.toggleCrabWalk() |
Toggles crab-walking mode on/off. |
walker.setGallop(boolean) |
Enables or disables sprint galloping mode. |
walker.isGalloping() |
Returns true if galloping mode is active. |
walker.jump([chargeTicks], [aim]) |
Charges kinetic suspension leap for [chargeTicks] (default 25) in directional aim [aim]. |
walker.bodyUp([ticks]) |
Raises walker chassis suspension height. |
walker.bodyDown([ticks]) |
Lowers walker chassis suspension height. |
walker.setHeightOffset(offset) |
Directly sets chassis hover height offset (in blocks). |
walker.getHeightOffset() |
Returns current chassis hover height offset. |
walker.setLean(rollDeg, pitchDeg) |
Actively tilts and leans the mech chassis by specified degrees. |
🚀 Jet Thrusters & Abilities
| Method | Description |
|---|---|
walker.setFlight(boolean) |
Activates or shuts down jet engine flight mode. |
walker.toggleFlight() |
Toggles jet engine flight mode. |
walker.isFlying() |
Returns true if currently flying with jet engines. |
walker.dash() |
Triggers an instantaneous jet boost dash. |
walker.grab() |
Toggles suction/climbing clamps on terrain and surfaces. |
walker.isGrabbed() |
Returns true if walker limbs are clamped onto a surface. |
📊 Telemetry & Assembly
| Method | Description |
|---|---|
walker.isAssembled() |
Returns true if the walker is assembled into a physics sub-level. |
walker.isParked() |
Returns true if the mech is parked (legs splayed, brakes locked). |
walker.setParked(boolean) |
Parks or unparks the walker. |
walker.isPowered() |
Returns true if the Walker Core has rotational kinetic power. |
walker.getLava() / getFuel() |
Returns (amount, capacity) of the onboard lava fuel tank in mB. |
walker.getLegCount() |
Returns total number of active articulated limbs. |
walker.getPosition() |
Returns world position (x, y, z). |
walker.getOrientation() |
Returns chassis angles (yaw, pitch, roll) in degrees. |
walker.getVelocity() |
Returns live velocity vector (vx, vy, vz) in blocks/second. |
walker.getStatus() |
Returns a comprehensive status dictionary containing all telemetry in a single call. |
walker.getWalkerId() |
Returns the unique UUID string of the assembled walker. |
🛠️ Included Lua Scripts
Check our repository for ready-to-run programs:
walker_pilot.lua: Interactive terminal cockpit HUD with live WASD keyboard steering, speed gauges, and gear shift indicators.patrol.lua: Autonomous perimeter waypoint patrol with gait sway filtering and automated obstacle leaping.lode_patrol.lua: Celestial beacon patrol orbiting around a Lodestone using Create Navigation Table compass signals and active stride auto-calibration.vector_estimator.lua: Stride gait low-pass filter that eliminates left-right walking wobble to estimate true Course Over Ground (COG).
👥 Authors & Credits
- CutCatRamen — Creator, Logo Designer & Lead Developer
- Antigravity — Co-Developer & Engineering
- Pavlo — Creator of Let it Walk!
- RyanHCode — Creator of Sable
- SquidDev / CC: Tweaked Team — ComputerCraft: Tweaked
Source Code & Issues: GitHub Repository Licensed under the MIT License.