Block Sniffer

This is a Scenter-like mod. It can show you a way to the target block(s).

Optimize the scanning rule,by default,it will skip air block.
Use command to add/remove target block(s) or change work mode.
No need to find the name(id) of the block,you can add the block in-hand or looking at (with meta).
Multi thread to scan the world,no lag.
Customizable work mode/range.
Supports several formats of colors. Hex Value(#abcdef),Minecraft Color(&5/&e),Web Color(blue,magenta),MapColor.
Add Gamma settings command

command	function
`/sniffer`	main command, simplify `/sf`
`/sf g/gamma [0-15]`	get/set Gamma
`/sf reload`	reload config
`/sf reset`	reset target
/sf setblock look│{<x> <y> <z>} <id│name>	set block (client side)
`/sf t/target i/info`	show information of current target
`/sf t/target m/mode [{0│1}]`	get/set work mode
`/sf t/target h/hrange [{0-15}]`	get/set horizon range(chunk)
`/sf t/target v/vrange [{0-255}]`	get/set vertical range(block)
`/sf t/target d/depth [{0-255}] [{0-255}]`	get/set vertical depth range(0-255)
`/sf t/target c/color [{#abcdef}│{&e}│{blue}│map]`	get/set particle color
`/sf t/target rm/remove`	remove current target
`/sf t/target cla/clear`	clear all targets
`/sf t/target add <{name│id}│hold│look> [meta] [{0-15}]`	add a new target
`/sf t/target add {name│id}`	add the block named `name` or id=`id` as a new target(ignore meta)
`/sf t/target add hold meta`	add the held block as a new target,using it's meta
`/sf t/target add look meta {0-15}`	add the looking block as a new target with the specific meta(0-15)
/sf t/target skip	skip current target block which can not be harvested.(client set block to air)
`/sf sub l/list`	show the sub-blocks of current target
`/sf sub add <{name│id}│hold│look> [meta] [{0-15}]`	add sub block to current target
`/sf sub rm/remove <{uid}>`	remove sub block with the uid `uid`

方块探测 (Block Sniffer)

此Mod是矿物追踪 (Scenter) 的改进增强版, 主要功能也是探测方块.

指令	功能
`/sniffer`	总指令, 简写`/sf`
`/sf g/gamma [0-15]`	查看/设置 Gamma 值
`/sf reload`	重载配置
`/sf reset`	复位探测器
/sf setblock look│{<x> <y> <z>} <id│name>	设置目标位置为指定方块(客户端)
`/sf t/target i/info`	查看当前探测目标信息
`/sf t/target m/mode [{0│1}]`	查看/设置探测模式
`/sf t/target h/hrange [{0-15}]`	查看/设置水平探测半径(区块)
`/sf t/target v/vrange [{0-255}]`	查看/设置垂直探测半径(方块)
`/sf t/target d/depth [{0-255}] [{0-255}]`	查看/设置探测深度范围
`/sf t/target c/color [{#abcdef}│{&e}│{blue}│map]`	查看/设置粒子颜色
`/sf t/target rm/remove`	移除当前探测目标
`/sf t/target cla/clear`	清除所有探测目标
`/sf t/target add <{name│id}│hold│look> [meta] [{0-15}]`	添加探测目标
`/sf t/target add {name│id}`	添加名为`name`或id为`id`的方块到新的探测目标, 将无视元数据
`/sf t/target add hold meta`	添加手持方块到新的探测目标, 并使用当前元数据
`/sf t/target add look meta {0-15}`	添加光标处方块到新的探测目标, 并使用指定的元数据
/sf t/target skip	跳过当前探测到得目标位置,以跳过无法挖掘的方块(客户端设置为空气)
`/sf sub l/list`	显示当前目标包含的子目标
`/sf sub add <{name│id}│hold│look> [meta] [{0-15}]`	添加子目标
`/sf sub rm/remove <{uid}>`	移除当前目标下id为`uid`的子目标