Adjacent tanks are automatically treated as a single tank, regardless of their shape.
Since the appearance in Sable changes dynamically based on the fill level, this mod adds tanks that are easy to use for airships, ships, vehicles, fuel tanks, and burst tanks.

List of Added Blocks

Variable Tank

ID: aero_variable_tanks:variable_tank

This is generally a transparent tank.
It is suitable for structures where you do not want the internal liquid to be visible, such as fuel tanks inside aircraft.

Transparent Variable Tank

ID: aero_variable_tanks:transparent_variable_tank

This is a transparent tank.
The liquid appears to be filled from the bottom, and the liquid level appears continuous between connected tanks.

Copycat Variable Tank

ID: aero_variable_tanks:copycat_variable_tank

It functions as a liquid tank while allowing you to customize the appearance of any block.

Features

- Automatic multi-blocking with adjacent tanks
- Liquid input/output via Create pipes and pumps -
Input/output settings per face using the Create wrench
- Dynamic changes in Sable weight based on fill level
- Empty tank weight is set to `0 kpg`
- Easy weight adjustment using the maximum contents weight system
- Support for Connected Texture on standard and transparent tanks
- Liquid level rendering for transparent tanks
- Copycats+ compatible Copycat Tanks
- Support for Create Mask Overlay - Support for Create Display Link
- Comparator
output support
- Configurable via the Mods menu

How to Use

1. Place a tank.
2. Place tanks of the same type or compatible tanks adjacent to each other to automatically form a single tank network. 3.
Use the Create Wrench to set the input/output mode for each face.
Equip the Create Goggles and look at the tank to check its contents, capacity, fill level, number of connections, and weight. 7. Connect a Create Display Link to output tank information to a display. 8. In Sable / Create Aeronautics, the weight changes based on the tank’s fill level.

Tank Inputs and Outputs
Right-click a tank’s face with the Create Wrench to toggle that face’s port settings.
The Create Wrench is a tool used to rotate, configure, and retrieve Create blocks.
Toggle order: None → Input → Output → Input/Output → None

Aeronautics: Variable Tanks