RECAVE

Bedrock pack that adds real cave sound echoes off walls, ground, and ceiling. Needs 1.21.60+ and Beta APIs.

ReCave

Caves that answer back.

v1.2.0 Bedrock 1.21.60+ Behavior pack only Mobile friendly

Made by A3x.

🕳️ Overview

ReCave brings real, realistic echo into Minecraft Bedrock.

Knock on a stone wall, swing a pickaxe, fire a bow, or set off a creeper, and the cave answers. Sound travels to the walls, ceiling and floor, bounces back from the right direction, and fades into a reverb that matches the size of the room. Sound finally has somewhere to go.

🪨 Tight tunnels
Quick, bright reflections. Loud sounds flutter between the walls.
💎 Huge caverns
Slow, dark, booming tails that hang in the air.
🌤️ Open air
Stays quiet on purpose. Echo is for underground.

✨ What's New in 1.2.0

Rebuilt echo engine — every echo comes from the surface that really bounced it, timed by the real path to your ears.
Room-size reverb — short and tight in small rooms, long and dark in big caverns, fading out naturally.
Flutter and tunnel echo — ping-pong between narrow walls, and deep replies from far down long passages.
Better thunder and explosions — they roll in from the right direction and are muffled deep underground.
In-game settings menu — toggle everything with a cave-themed UI, plus three presets.
Nether and multiplayer — Nether caves echo too, and every player hears their own echo timing.
Lighter on low-end devices — cached cave scans and a per-tick time limit keep phones smooth.
New achievements and icon — Cathedral, Whispering Walls, and a fresh pack icon.

⛏️ Features

Walls / Floor / CeilingDirectional early reflections from the real surfaces around you
Reverb tailLength and darkness follow the size of the cave
Flutter echoRapid bouncing between narrow, hard walls
Tunnel echoDistant, deep replies down long passages
MaterialsStone and deepslate ring longer. Wool, dirt and leaves soak sound up
ActionsFootsteps, landing, mining, combat, projectiles, tools, doors, chests, buttons and more
Weather and blastsDelayed, directional thunder and explosions that rumble in several parts
AtmosphereCave ambience, low-health heartbeat and rain-on-roof detail
DimensionsOverworld caves and the Nether
Achievements8 to unlock, from First Echo to Cathedral
FeelTuned to sound natural, not noisy

🔦 Settings Menu

Open it any of these ways:

Echo Shard
Hold one and use it. Easiest on mobile. Get one with /give @s echo_shard
Chat
Type !setting (or !settings, !recave) if your version supports it
Command
/scriptevent recave:setting always works

Inside the menu, tap a row to toggle it:

  • Cave Echo master switch
  • Presets: Natural, Cinematic, Subtle
  • Echo Features: Reverb Tail, Flutter Echo, Tunnel Echo
  • Ambience and Extras: Cave Ambience, Footstep Echo, Landing Thuds, Heartbeat, Door and Chest Echo, Rain on Stone Roof
  • Fine Tuning: Power, Darkness and Room Size
  • Test Echo, an Achievements page, and Reset to Default

Everything you change is saved with your world.

Quick commands

/scriptevent recave:toggleTurn echo on or off
/scriptevent recave:preset naturalAlso cinematic or subtle
/scriptevent recave:intensity 1.5Echo loudness from 0 to 2
/scriptevent recave:statusShow version and current settings

💎 Presets

Natural
True-to-life cave sound. The default.
Cinematic
Big, dramatic echoes with a long reverb.
Subtle
A light touch with low echo.

🧭 Compatibility

  • Minecraft Bedrock 1.21.60+
  • Works on 1.21.121
  • Beta APIs (Experiments) are recommended for full event coverage
  • Behavior pack only. No resource pack required
  • Runs on mobile, including low-end devices

📦 Installation

  1. Download the .mcaddon
  2. Open it with Minecraft (or import it on your device)
  3. World settings → Behavior Packs → turn on ReCave
  4. Enable Beta APIs under Experiments if asked
  5. Load in, go into a cave or a closed room, and knock on the stone

Updating from an older version? Remove the old ReCave from your world first so nothing conflicts.

🛠️ Tips and Troubleshooting

  • Echoes only happen underground and in closed spaces. Open fields stay quiet on purpose.
  • Use Test Echo in the menu to check that it works.
  • Too much echo? Pick Subtle or lower Power. Want more drama? Pick Cinematic.
  • If !setting does nothing on your version, use the Echo Shard or the command instead.
  • If nothing plays, check that the behavior pack is active and Beta APIs are on.

Credits

Original author and copyright holder: A3x.

ReCave [v1.2.0] made by A3x.

All rights reserved. This pack and its code belong to A3x.
Do not reupload, redistribute, reup, copy, or claim as your own.
Unauthorized commercial use is prohibited.

License

All Rights Reserved.

Copyright (c) 2026 A3x.

Permission is not granted to copy, modify, redistribute, or reupload this work.
For permissions, contact the original copyright holder: A3x.

Script packs need the game's Script API. A few optional events can differ by platform or small version changes, but the core echo behavior stays solid.

Thanks for using ReCave.

— A3x.

RECAVE Team

profile avatar
  • 2
    Projects
  • 993
    Downloads

Well just an ordinary guy that have experience in coding

More from A3x_xbudx