Tyr Duna Mission (full station & bases) [Stock]

Set up bases with rovers on Duna and Ike and a station in Duna orbit with only one transfer ship!
The rover comes *for free* with the base and can dock to it through it's innovative landing-leg-system! :D

The rover comes *for free* with the base and can dock to it through it's innovative landing-leg-system! :D

Another shot to illustrate the optimal balance, this time from the front of Odin, so you can see most parts from above.

Another shot to illustrate the optimal balance, this time from the front of Odin, so you can see most parts from above.

The massive Odin carrier can transport all required parts from Kerbin to Duna. Just make sure to keep the balance, as can be seen in the picture!

The massive Odin carrier can transport all required parts from Kerbin to Duna. Just make sure to keep the balance, as can be seen in the picture!

Attached to two docking ports on the side are the Lander (for transfer between Duna surface and the station) and the Taxi (for transfer to Ike surface to the station).

Attached to two docking ports on the side are the Lander (for transfer between Duna surface and the station) and the Taxi (for transfer to Ike surface to the station).

Just carefully drive the rover under the docking port and activate the landing legs. They will lift the rover exactly up to the docking port and it will connect without problems.

Just carefully drive the rover under the docking port and activate the landing legs. They will lift the rover exactly up to the docking port and it will connect without problems.

The rover lands with it's own sky crane, the base can hold up to 5 Kerbals.

The rover lands with it's own sky crane, the base can hold up to 5 Kerbals.

Description

This mission is fully equipped to send a full habitation environment in the Duna system, including:

  • The Valhalla station in Duna orbit
  • The Propylaea base on the surface of Duna, including...
  • The Propylaea Rover dockable to the base
  • The Duna Lander, to transfer Kerbals between the Valhalla station and the surface of Duna
  • The Metope Ike base
  • The Fenris Ike rover
  • The Ike Taxi, to transfer Kerbals between the surface of Ike and the Valhalla station
  • The Candyman ATV for resupply missions from Kerbin
  • The Duna Shuttle to transfer Kerbals between Kerbin and Duna
  • ...and of course the magnificent Odin Carrier, to bring all that stuff in Duna orbit the first time!

The idea is to first bring up the Odin carrier into LKO (yes, this will use up all the fuel in the transfer tanks. This is intended by design!), then launch all the other Tyr modules (except for the Shuttle or the Candyman, they have the Delta-V to get to Duna on their own) and dock them to the carrier. Because my design was not entirely flawless, there are a few "helper ships" to do that (specifically you'll need the Z1 adapter to dock the small docking port of the Propylaea base to the normal docking port of the carrier, and the Z2 external thruster to actually maneuver the Valhalla station). After everything is docked, you can send up refueling missions to fill the Odin tanks again, and use the two nuclear engines of Odin to transfer everything to Duna. You should pay attention to the docking, in order to keep the CoM roughly balanced on the CoT; I'd like to refer to the included screenshots on how to do that. When you reach Duna, just undock everything, land stuff where it belongs, and enjoy your brand new system of bases and stations! Congratulations!

Warning: The Delta-V calculations are rather tight, so you might want to focus on efficiency, otherwise you'll easily run out of fuel! Everything was based on a stock game (with non-part addons like docking cams and the alarm clock), so I can guarantee that things will not work well with difficult mods like Ferram Aerospace or Deadly reentry!

The Tyr Duna Mission (full station & bases) [Stock] Team

profile avatar
  • 2
    Projects
  • 13.4K
    Downloads

More from _ForgeUser3469896