promotional bannermobile promotional banner

DaMichel's Fuselage (DMF)

An aero parts mod adding adding seven (7) stock-alike flat fuselage parts.
Download

File Details
Download

DaMichel's Fuselage Version 1.1.0.1 - Spit'n'Polish

Byzer0Kerbal
  • R
  • Feb 23, 2020
  • 611.75 KB
  • 289
  • 1.8.1+10

File Name

DaMichelFuselage.1.1.0.1.zip

Supported Versions

  • 1.8.1
  • 1.8
  • 1.7.3
  • 1.7.2
  • 1.7.1
  • 1.7
  • 1.6.1
  • 1.6.0
  • 1.5.1
  • 1.5
  • 1.4.5

Fuselage version KSP version CKAN listed License CC BY-NC-SA 3.0

Version 1.1.0.1 - Spit'n'Polish

  • thank you to KottabosGames for the review and suggestions!
  • thank you to BenjaminCronin for pointed out decorative right brace in changelogs. wite-out applied.
  • Also dangling VERSION. superglued applied.
  • adjusted strength and temperatures of all parts.
  • added explosionPotential = 0.5
  • added missing buoyancy = 0.1
  • [DM-fuselage-intake.cfg] has the same specs like the Ram Air Intake.
    • added missing thermalMassModifier = 12.0
    • added missing machcurve to ModuleResourceIntake on intake
    • adjusted intakeSpeed from 10 to 15
    • adjusted RESOURCE IntakeAir amount/maxAmount from 0.2 to 2.0
    • adjusted cost/entryCost from 2000/1600 to 2680/14000
    • adjusted maximum_drag from 0.2 to 0.3
    • adjusted minimum_drag from 0.2 to 0.3
    • added missing ModuleAnimateHeat
    • added missing stackSymmetry = 2
  • [DM-fuselage-cone]
  • basing stats on: Advanced Nose Cone - Type B (pointyNoseConeB)
    • adjusted scale = 0.9375, 0.9375, 0.9375 from 1.0, 0.9375, 1.0 noted by Kottabo
    • adjusted entryCost to 8000 from 1600
    • corrected typo on maximum_drag should have been 0.1 instead it was 0.11
    • adjusted angularDrag to 0.25 from 0.5
    • adjusted maxTemp to 2000 from 2900
    • added: size2 to bulkheadProfiles = mk1, size2, srf
    • added: explosionPotential = 0.5
    • added: CoMOffset = 0.0, 0.0, -0.313
    • added: CoPOffset = 0.0, 0.0, -0.313
    • added: CoLOffset = 0.0, 0.0, -0.313
    • added: CenterOfDisplacement = 0.0, -0.2, 0.0
    • added: thermalMassModifier = 6.0
    • added: emissiveConstant = 0.95
    • added: buoyancy = 0.1
    • added ModuleAnimateHeat
  • [DM-fuselage-tailboom]
  • Based upon Tail Connector A (airplaneTailB)
    • adjusted entryCost to 2500 from 1600
    • adjusted cost to 500 from 200
    • adjusted crashTolerance to 8 from 20
    • adjusted maxTemp to 2200 from 2900
    • added: thermalMassModifier = 6.0
    • added: emissiveConstant = 0.95
    • added: explosionPotential = 0.5
    • added: CoMOffset = 0.0, -1.5, 0.0
    • added: CoPOffset = 0.0, -1.5, 0.0
    • added: CoLOffset = 0.0, -1.5, 0.0
    • added: CenterOfDisplacement = 0.0, -1.5, 0.0
    • added: buoyancy = 0.1
    • added: explosionPotential = 0.5
    • added: ModuleAnimateHeat
  • [DM-fuselage-X1] DMF - Flat Fuel Tank X1
  • based upon Mk2 Rocket Fuel Fuselage Short(mk2FuselageShortLFO)
    • adjusted: entryCost to 15000 from 1600
    • adjusted: crashTolerance to 50 from 10
    • adjusted: maxTemp to 2500 from 2900
    • added: buoyancy = 0.1
    • added: srf to bulkheadProfiles = mk1, srf
    • added: mirrorRefAxis = 0, 0, -1
    • added: ModuleLiftingSurface
  • [DM-fuselage-X2] DMF - Flat Fuel Tank X2
  • based upon Mk2 Rocket Fuel Fuselage(mk2FuselageLongLFO)
    • adjusted: entryCost to 18000 from 1600
    • adjusted: crashTolerance to 50 from 10
    • adjusted: maxTemp to 2500 from 2900
    • added: buoyancy = 0.1
    • added: srf to bulkheadProfiles = mk1, srf
    • added: mirrorRefAxis = 0, 0, -1
    • added: ModuleLiftingSurface
  • [DM-fuselage-front] DMF - Flat End
  • based upon (noseConeAdapter) NCS Adapter
    • adjusted: entryCost to 8000 from 600
    • adjusted: mass to 0.1 from 0.11
    • adjusted: angularDrag from 0.25 // 0.5
    • adjusted: maxTemp to 2400 from 2900
    • added: explosionPotential = 0.5
    • added: CenterOfDisplacement = 0.0, -0.2, 0.0
    • added: thermalMassModifier = 6.0
    • added: emissiveConstant = 0.95
    • added: buoyancy = 0.1
    • added: bulkheadProfiles = mk1, size0
    • added: ModuleAnimateHeat
  • [DM-fuselage-adapter] DMF - Flat to 1.25m Round Adapter
  • based upon (mk2SpacePlaneAdapter) Mk2 to 1.25m Adapter
    • adjusted: entryCost to 14000 from 1600
    • adjusted: minimum_drag to 0.1 from 0.3
    • adjusted: angularDrag to 2 from 1
    • adjusted: crashTolerance to 50 from 10
    • adjusted: breakingForce to 50 from 200
    • adjusted: breakingTorque to 50 from 200
    • adjusted: maxTemp to 2500 from 2900
    • added: srf to bulkheadProfiles = mk1, size1, srf
    • added: buoyancy = 0.1
    • added: emissiveConstant = 0.8
    • added: explosionPotential = 0.5
    • added: ModuleLiftingSurface
  • adjusted breakingForce on all parts from 50 to 200 (except where noted)
  • adjusted breakingTorque on all parts from 50 to 200(except where noted)
  • adjusted B9fuelswitch to have LF come after Structural instead of LFO <hr> <p style="color: #FF0000;">Kerbal Space Program 1.8.1<br> <!-- CC BY-NC-SA-4.0 zer0Kerbal -->#2