Blade Bound-Customizable Katana's

to report a bug please comment on curseforge for now (will figure something else out soon)

troubleshooting

first find the katanas id number and blade type

to get the katana id use /getkatanaid

comment the id number and whats wrong with it (wrong handle hilt etc)

First you have to make yourself a "sword makers anvil"

Now right click the anvil too open the forging gui

place your blade, hilt and handle in the blade forging slots in the order shown

Next click the hammer, this will start a 10 second timer it is your job to click the hammer as much as possible until you reach the hammer count (HC), any sword has a HC of 30, so you must click the hammer 30 times before the timer runs out.

if you are successful you have forged you first katana!

First you have to make yourself a "sword makers anvil" a "kiln" and a "burner"

Next assemble the kiln and burner like this

Now right click the burner while holding any sort of coal/charcoal

It should light and look like this

Now we can start to make alloys! (imma use Gold steel alooy for a example)

First right click the lit kiln with steel to heat the steel! (some alloys need a super heated kiln to be heated)

these are 

-Purified Black Steel

-Netherack Alloy

-Prismarine Alloy

To super heat a kiln use super fuel

The kiln will turn blue and be lit for longer

remember to be quick after a while the steel will cool!

Now right click the anvil too open the forging gui

always put the heated metal at the top section!

Now the hard bit :(

click the hammer this will start a 10 second timer it is your job to click the hammer as much as possible until you reach the alloys hammer count (HC), for example for gold steel alloy the HC is 40, so you must click the hammer 40 times before the timer runs out.

if you are successful you will of made your first alloy!

if you are not successful you will make srap metal ):

theses alloys can be used to make baldes handles and hilts!

i am working on adding jei compatability but for now this will do

REMEMBER TOO HEAT THE STEEL BEFORE CRAFTING!!!

Katana recipe

  use different components to customize the katana!

Blade recipe

HC-30 (use any steel alloy for this)

Mixed steel blade recipe

HC-55

Steel recipe

HC-30

Gold Steel alloy

HC-40

Black steel

HC-40

Prismarine alloy

HC-55

Netherack alloy

HC-50

Pure black steel

HC-55